27" Mirror with selfmade frame

jersam

@kruemel which bits did you use to cut the wood.

Looks like you started with a 2x4, cut into a L shape with a ledge, put a smaller strip of wood to hold the mirror and display in.

its nicely done so i was curious.

I just picked up a table saw so i can do a datto cut in wood.

onkelbobby

@kruemel
thanks… no need to take pictures…
I’m just wondering why my sensor is no working trough the glass wood combination (Mirropane Chrome Spy 4mm + plywood 5mm)

Anyway, I found another way to mount it almost invisible.

teegray1124

does your myweather module still work?

kruemel

@teegray1124 Yes but i think you mean the “rainfall” amount, when you ask like this ^^
I noticed that it states “nullmm” instead of a number, since a couple weeks.

kruemel

@jersam Aaaah, now i get your point :D

I started with 2

Douglas Wood 4,5 cm x 200 cm x 7 cm
https://www.obi.ch/terrassendielen/unterkonstruktion-douglasie-4-5-cm-x-200-cm-x-7-cm/p/3434313

Cut in the half and to my needed length.
Get rid of the wood i dont need with a wood milling, like this:
alt text

…with two different positions to get a “stairway” :-)

max86

Hello @kruemel , is that possible to have the outline dimensions, i’m thinking about building almost the same ? Actually, i don’t know what should be the size of overflow for the mirror, to keep it strong.

Really nice setup :)

kruemel

@max86 Hi Max, sure :-)
Outline is 153cm x 40.3cm for the frame
and visable mirror is 34.3cm

So the overflow in my case should be about ~1.5 to 1.7cm

hayman

very nice, specialy the price of the mirror hope in NL will have like these …:(

zdenek

@kruemel is it possible to make pic for me? Adn, I’ve never been playing with any HW module - how to connect the module? There are some “cables” or I’ve to “create” them?
Thanks, Zdeněk

P.S.: nice job…