Read the statement by Michael Teeuw here.
27" Mirror with selfmade frame
-
Nice work, i see you used a radar sensor.
How and where exactly did you attach this? -
Very nice mirror. Looks great.
I am also curious about the prices of the mirror and shipping costs. -
FYI: Glastroesch.de doesn’t ship their mirrors. They also do not directly sell to private people but give you a contact that does. Apparently they are around Ulm (for those that live close enough).
-
Hi kruemel,
good job… looks very professional.
Since I’m using the same RCWL0516 motion sensor I have also some questions:- How did you mount it that it is working through the glass?
I tried id with my Mirropane Chrome Spy 4mm but there was no detection trough the glass at all. - Maybe you can share some pictures especially of the motion sensor?
Thanks, onkelbobby
- How did you mount it that it is working through the glass?
-
which router bits did you use on the 2x4s?
-
Ah sorry i did not get any notifications about new posts :-)
I will answer all the questions this week -
@jersam said in 27" Mirror with selfmade frame:
which router bits did you use on the 2x4s?
Sorry i dont get your point ^^
Do you mean this, maybe?
-
@onkelbobby Hi, thank you :-)
I just mounted the sensor on a piece of wood behind the glass (to reduce the range a little bit without a tresistor) instead of directly behind the glass.
If you need i can make a picture but i think the illustration should do the job ;-)
-
@kruemel which bits did you use to cut the wood.
Looks like you started with a 2x4, cut into a L shape with a ledge, put a smaller strip of wood to hold the mirror and display in.
its nicely done so i was curious.
I just picked up a table saw so i can do a datto cut in wood.
-
@kruemel
thanks… no need to take pictures…
I’m just wondering why my sensor is no working trough the glass wood combination (Mirropane Chrome Spy 4mm + plywood 5mm)Anyway, I found another way to mount it almost invisible.
