[Remote-Control] Shutdown, Configure and Update your MagicMirror

[Jopyth]

@justjim1220 This is intended to be used from a different device (i.e. not your MagicMirror), for example, your smartphone or tablet. Maybe you could get it to work on your MagicMirror with something like the IFrame module and a touchscreen?

[dmwilsonkc]

@jopyth I just want to thank you again for your work on this module! Your module rocks!

BTW - It doesn’t have to be a mobile/tablet, I wrote an AI skill for Mycroft that uses your MMM-Remote-Control module to pass verbal commands to the MagicMirror.

If you’d like, check out the 2 min. video here.

And here’s a link to the repo if anyone would like to check out the Python code that interacts with the MMM-Remote-Control module.

Thanks again!
Cheers!

[BluP]

@snille

Hi snille,

Have you ever found a solution? I want to do something similar, but was also not able to get a module to be hidden/shown during certain times using MMM-ModuleScheduler

I tried

{notification: 'REMOTE_ACTION', schedule:  '*/2 * * * MON-FRI', payload: {action: "SHOW&module=module_15_MMM-Traffic"}},
                                
{notification: 'REMOTE_ACTION', schedule:  '1-59/2 * * * MON-FRI', payload: {action: "HIDE&module=module_15_MMM-Traffic"}}

Does not make real sense, switching on a module every other minute, but would have been nice for testing…

If I use this as a GET request via HTTP,

http://My_MM_IP:8080/remote?action=HIDE&module=module_16_MMM-Traffic

it works like charm…also curl works using another Raspi sending this command to the MM

Any idea?

Thanks, Peter

[PaulB]

Dear MM-Builders,

does someone know how to solve attached problem?

Thanks in advace :-)

[Hein-Jan]

@paulb

Is your device listed in “whitelist”, in your config.js?

Please check forum on whitelist issues.

Hein-Jan

[m0111k]

@jopyth in light of topic resurrection, I’m looking into creating multiple functions for my pi’s. I’m using MMM-NetworkScanner and MMM-Remote-Control. The idea is like follows:

When I leave home, my mobile goes offline from home network. I’m looking for a command to enable camera (reboot y/n) to enable another project I’d like to combine with this. (Pi Camera Notifier: https://iotbreaks.com/build-a-camera-alert-application-with-raspberrypi-3-and-iosandroid-pushbullet-app/) turning it into a security cam. The commands available in the readme of MMM-RC didnt hand me a clue for further investigations

I’d love to see these work in conjunction that’d give it a whole new dimension :)

[robiv8]

Hallo, my remote control work.
but
When I pull the restart button the MagicMirror restarts fine but I become a Fehler (Fail)
What can this be?

My Log after push the button:

0|mm  | Shutting down server...
0|mm  | Stopping module helper: MMM-Page-Selector
0|mm  | Stopping module helper: MMM-Remote-Control
0|mm  | Stopping module helper: MMM-DWD-WarnWeather
0|mm  | Stopping module helper: MMM-PublicTransportHafas
0|mm  | Stopping module helper: newsfeed
0|mm  | Stopping module helper: MMM-Buttons
0|mm  | Use --update-env to update environment variables
0|mm  | [PM2] Applying action restartProcessId on app [mm](ids: 0)
0|mm  | { Error: Command failed: pm2 restart mm
0|mm  |     at ChildProcess.exithandler (child_process.js:287:12)
0|mm  |     at emitTwo (events.js:126:13)
0|mm  |     at ChildProcess.emit (events.js:214:7)
0|mm  |     at maybeClose (internal/child_process.js:925:16)
0|mm  |     at Socket.stream.socket.on (internal/child_process.js:346:11)
0|mm  |     at emitOne (events.js:116:13)
0|mm  |     at Socket.emit (events.js:211:7)
0|mm  |     at Pipe._handle.close [as _onclose] (net.js:554:12)
0|mm  |   killed: false,
0|mm  |   code: null,
0|mm  |   signal: 'SIGINT',
0|mm  |   cmd: 'pm2 restart mm' }
0|mm  | > magicmirror@2.6.0 start /home/pi/MagicMirror
0|mm  | > sh run-start.sh
0|mm  | Starting MagicMirror: v2.6.0
0|mm  | Loading config ...

[swvalenti]

Same error as above but in English. Def restarts MM with no issue but MM RM displays error oddly?

[robiv8]

Nobody an idea?
Now the notification does not work anymore! Somehow I have the feeling that this block any other modules.
You can send but it does not matter! Also no error message.

[nobita]

@Jopyth What Happen? and how to solve it?