trouble with config file

[cowboysdude]

@II12yanII said in trouble with config file:

@nuckinfutz said in trouble with config file:

If you still haven’t gotten anywhere I’ll zip up and send you my entire directory structure and a step by step instruction sheet I wrote for myself to get the basic mirror up and running. You can compare them to yours and see where we differ. That should give you some insight.

that would be awesome. i still havent gotten anywhere. i reinstalled node.js along with reinstalling magic mirror and so on. the only thing i havent tried reinstalling is raspbain. but i still get the same startup script failed electron.js

My suggestion would be this…

Format your card using this [please read the entire thing]->
https://forum.magicmirror.builders/topic/236/complete-setup-tutorial/3

and reinstall raspbian… This one -> RASPBIAN JESSIE WITH PIXEL from: https://www.raspberrypi.org/downloads/raspbian/

From there open a terminal window and run:
[Download and install the latest Node.js version]

curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
sudo apt-get install -y nodejs

After that is done then:

git clone https://github.com/MichMich/MagicMirror.git

go to the MagicMirror folder and run:
npm install

Once that’s completed run:
npm start

IF you get any errors post a screen shot as that helps VERY much :)

[nuckinfutz]

Sorry about the delay. Here’s my solution.
If you still have a problem I’ll zip everything up and send it to you.
my solution and cowboys are similar but I always make sure with linux flavors everything is up to date. It’s just a habbit I also made everything so you could just copy entire commands then paste them into the terminal to save time
Install jessie using this Noobs link.

Its super easy to follow and takes care of a lot of basic steps automatically

https://www.raspberrypi.org/downloads/noobs/
Follow the directions

If you need to set up a wireless card go here scroll down and
follow the wireless instructions then come back here

https://forum.magicmirror.builders/topic/236/complete-setup-tutorial/6

Now to configure your Pi go to superkey(Windows key) - preferences - raspberry pi configuration
Set up location, keyboard, time zone and time. The correct time is very important.

open up a terminal and run this the following command to get everything up to date

sudo apt-get update ; sudo apt-get upgrade

Now run the following to update the RPi firmware

sudo rpi-update

When done reboot

Now install the MM software
Open a terminal and run

curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh | bash

Rotate your screen if you want by doing this. I didnt bother for now

sudo nano /boot/config.txt

Rotate display vertically

display_rotate=1

ctrl-x to save then Y for yes

Now do this Or just use your file manager to make your copy of the config file.
I never modify the .sample file

cd /home/pi/MagicMirror/config
cp config.js.sample config.js

now change to the MM folder

cd /home/pi/MagicMirror

Use the following to start your mirror

DISPLAY=:0 npm start

[II12yanII]

@cowboysdude said in trouble with config file:

@II12yanII said in trouble with config file:

@nuckinfutz said in trouble with config file:

If you still haven’t gotten anywhere I’ll zip up and send you my entire directory structure and a step by step instruction sheet I wrote for myself to get the basic mirror up and running. You can compare them to yours and see where we differ. That should give you some insight.

that would be awesome. i still havent gotten anywhere. i reinstalled node.js along with reinstalling magic mirror and so on. the only thing i havent tried reinstalling is raspbain. but i still get the same startup script failed electron.js

My suggestion would be this…

Format your card using this [please read the entire thing]->
https://forum.magicmirror.builders/topic/236/complete-setup-tutorial/3

and reinstall raspbian… This one -> RASPBIAN JESSIE WITH PIXEL from: https://www.raspberrypi.org/downloads/raspbian/

From there open a terminal window and run:
[Download and install the latest Node.js version]

curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
sudo apt-get install -y nodejs

After that is done then:

git clone https://github.com/MichMich/MagicMirror.git

go to the MagicMirror folder and run:
npm install

Once that’s completed run:
npm start

IF you get any errors post a screen shot as that helps VERY much :)

Thanks so much that fixed it for me. it now runs without errors. but im back to my original problem of my config file. the weather and news just stay at loading … and never update. here is a copy of my config file. i believe i put in my api key and everything correctly.
Edit. i got the fox news portion of my config file to work but the weather still doesn’t update at all.

/* Magic Mirror Config Sample
*

• By Michael Teeuw http://michaelteeuw.nl
• MIT Licensed.
  */

var config = {
port: 8080,

language: 'en',
timeFormat: 12,
units: 'imperial',

modules: [
	{
		module: 'alert',
	},
	{
		module: 'clock',
		position: 'top_left'
	},
	{
		module: 'calendar',
		header: 'US Holidays',
		position: 'top_left',
		config: {
			calendars: [
				{
					symbol: 'calendar-check-o ',
					url: 'webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics'
				}
			]
		}
	},
	{
		module: 'compliments',
		position: 'lower_third'
	},
	{
		module: 'currentweather',
		position: 'top_right',
		config: {
			location: 'Brunswick',
			locationID: '23',  //ID from http://www.openweathermap.org
			appid: 'cea6dc928b7d5437e5883dcda250fa8e'
		}
	},
	{
		module: 'weatherforecast',
		position: 'top_right',
		header: 'Weather Forecast',
		config: {
            location: 'Brunswick',
			locationID: '23',  //ID from http://www.openweathermap.org
            appid: 'cea6dc928b7d5437e5883dcda250fa8e'
		}
	},
	{
		module: 'newsfeed',
		position: 'bottom_bar',
		config: {
			feeds: [
				{
					title: "Fox News",
					url: "http://www.foxnews.com/about/rss/"
				}
			],
			showSourceTitle: true,
			showPublishDate: true
		}
	},
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== ‘undefined’) {module.exports = config;}

[bhepler]

Just a suggestion: Try replacing that location id of locationID: '23' with locationID: '2173741'.

[II12yanII]

@bhepler said in trouble with config file:

Just a suggestion: Try replacing that location id of locationID: '23' with locationID: '2173741'.

that fixed it for me thanks. i guess using the map to get the ID for my location wasn’t the right ID.
Thank you everyone for your help my config file is the way i want it and it runs without any errors.