Read the statement by Michael Teeuw here.
Stop the screensaver!
-
-
-
Thanks everyone for the erplies. I am still having the same issue, but doing some more testing and reading. I found this post:
http://www.geeks3d.com/hacklab/20160108/how-to-disable-the-blank-screen-on-raspberry-pi-raspbian/
In theory, just modifying the lightdm.conf should do the trick with newer versions of Raspbian Jessie Lite. I will poke around some more, hopefully i find a fix, so I can provide something back to this community.
-
Hi all,
after doing this
Disable the screensaver:
Go to LXDE-autostart config:sudo nano /etc/xdg/lxsession/LXDE/autostart
add the following lines:
@xset s noblank
@xset s off
@xset -dpmsSave and close, using the commands CTRL-O and CTRL-X.
Go to lightdm.conf:
sudo nano /etc/lightdm/lightdm.conf
add the following lines in section [SeatDefaults]:
xserver-command=X -s 0 -dpms
The fucking screensaver is starting again.
Then i do following:
sudo apt-get install xscreensaver
sudo apt-get remove xscreensaverAn i never see a starting screensaver gain.
Good luck!
-
So here is how I was able to fix my issue with the screen saver. I started this project following the tutorial from here:
https://github.com/MichMich/MagicMirror/wiki/Jessie-Lite-Installation-Guide
When you get to the Disable the ScreenSaver portion of the article, instead of changing the autostart file under
/etc/xdg/lxsession/LXDE/autostart
You should modify the autostart file under ~/.config/lxsession/LXDE/autostart
sudo nano ~/.config/lxsession/LXDE/autostart
Comment the first 3 lines (using a #), then add the same three lines listed in the tutorial. The final autostart file after all modifications should look similar to:
#@lxpanel --profile LXDE
#@pcmanfm --desktop --profile LXDE
#@xscreensaver -no-splash@xset s noblack
@xset s off
@xset -dpmsOnce that is done, follow the instructions to modify the lightdm.conf file:
sudo nano /etc/lightdm/lightdm.conf
[SeatDefaults]
xserver-command=X -s 0 -dpmsSave the changes, reboot your raspberry pi (I am using an RPi3), and the screen saver is gone for good. Hopefully this helps someone else having the same issue.
-
@frog said in Stop the screensaver!:
There’s no need for that attitude. Please desist as this is a forum for helping people. I also had this problem so it isn’t isolated. It may not be possible to add a keyboard and mouse to the screen and use the screensaver utility.
Attitude? Oh you haven’t seen my attitude… just making a simple suggestion where there doesn’t need a case made out of it. It’s THE simplest way for NON programmers to do it…
-
I realize how (super) old this topic is, but for anyone who stumbles across it and still dealing with this, xscreensaver really is the easiest solution.
sudo apt-get install xscreensaver
Just change the screen saver in there to no screen saver, and you’re sorted.
-
Hey guys,
there is another option on disabling the screensaver, which worked perfectly for me.
Just disable the screensaver in the option menu of debian.Hope this helps someone :)
-
Revived again. I have xscreensaver installed and the screensaver disabled. It still blanks the screen after a day.
-
Hello,
After a total reinstall of the recent raspberry to integrate Google Assist Pi, I also have the same problem.
After watching, I end up with an empty screen after about 6 hours. I am forced to restart MagicMirror via the MMM-Remote-Control module.
On the other hand I do not have xsceensaver of installed but the modification of the lines of command indicated in the wiki of installation of MMI did not experience this problem before. The only difference between my two installations is the 2.3.1 update of MagicMirror.
Would it affect?Regards,
