[MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer

AxLed

I did some furter bugfixing:

bugfixing the “http:8001” problem

Please check the dev branch of my module:
Rename your MMM-Dreambox folder to _MMM-Dreambox (for example)
do a git clone --branch dev https://github.com/Ax-LED/MMM-Dreambox.git in your modules folder

Now the module should work with dreambox, no matter if the dreambox uses a separat port or not.

Regards

AxLED

evroom

I found 1 ‘issue’ in the /web/about on my 1 tuner VU+zero:
(had to put spaces after and before < and > ; forum issue)

< e2servicename >< /e2servicename >

On the OpenWebif is shows “Nothing running …”.
As if it is on standby.

This is what I get on my 2 tuner VU+ solo2, when on:

< e2servicename >Das Erste HD< /e2servicename >< e2servicename >

And when it is in standby:

< e2servicename >< /e2servicename >

Did not look at the other xml output in detail yet.

So, when /web/about does not find a service, hence null, it should be replaced by “Nothing running …”.

AxLed

@evroom
I never tried my module in dreambox standby, as i dont use it. My dreambox is on or in deep standby.
Can you please try with your receivers (Dreambox or VU) on?

AxLED

evroom

@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Now the module should work with dreambox, no matter if the dreambox uses a separat port or not.

I can confirm that with or without port, streaming works.

AxLed

@evroom said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Error: null in http://192.168.178.47/web/about

I checked with some of the files you send me (all different 3 VU+ about xmls), the work in my environment. Is your VU+ maybe also in standby mode?

AxLED

evroom

@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Can you please try with your receivers (Dreambox or VU) on?

VU+ Solo2:

When on /web/about shows the service name.
When in standby it shows no service name.

Dreambox dm7020hd:

When on /web/about shows the service name.
When in standby it shows no service name.

So, the same.

When I use the Dreambox for the module, there are NO errors.
The service list is shown.

When I use the VU+ for the module, there are errors.
The service list is NOT shown.
The errors are different when in standby (/web/about) and when on (/web/epgnow).

Could you please also print the errors in the pm2 log ?
Now on the Mirror I see Error for 30 seconds and then Error: for 2 seconds.

evroom

Btw,

VU+ Solo2:

http://192.168.178.46/web/epgnow?bRef=1%3A7%3A1%3A0%3A0%3A0%3A0%3A0%3A0%3A0%3AFROM BOUQUET "userbouquet.favourites.tv" ORDER BY bouquet

Works. Both when on or in soft-standby.

evroom

@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

I never tried my module in dreambox standby, as i dont use it. My dreambox is on or in deep standby.

When in deep standby I would expect that you will see

< e2servicename >< /e2servicename >

for /web/about.
And as you do not see an error, I fail to see the difference with the VU+ in soft-standby.

But in deep standby, you cannot stream, can you ?
Will the playable services then be none ?

Cannot test this now without being killed by the family :-)

AxLed

@evroom said in [MMM-Dreambox]:

Cannot test this now without being killed by the family

@evroom
Welcome to my world :-)

I have another idea:
Did you check/compare the settings on your tuners (dreambox vs. VU+).
I case of my dreambox (DM800SE) they are under:

Erweiterungen -> Webinterface
Extensions -> Webinterface (maybe the spelling is different, as i translated them into english)

This is a screenshot of my actual setting (i only played around with the HTTP Port to fix some earlier bugs):

AxLED

evroom

For VU+ Solo2:

Port is 80 and HTTP authentication on yes.

Will set HTTP authentication to no and try again.

I see now, there is also a separate OpenWebif config:

This uses port 81 and indeed works.
Looks totally different from the Webif.
Interesting.

For the Dreambox I cannot find a menu item like this.
I still use the original Dreambox OE2.0 image.