Read the statement by Michael Teeuw here.
ipwhitelist - a lot of issues... can't connect remotely ..
-
Some days now, i try to get my MM running on a Raspberry (Zero, B3A+) but without Access
two main issues occurs…
i can’t access remotly …
whatever i tried in “config.js”
this is what i tried
var config = {
address: “localhost”, // Address to listen on, can be:
// - “localhost”, “127.0.0.1”, “::1” to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - “”, “0.0.0.0”, “::” to listen on any interface
// Default, when address config is left out, is “localhost”
port: 8080,
ipwhitelist: [],
//ipWhitelist: [“::fff:0.0.0.0/1”, “::fff:0.8.0.0/1”, “::fff:128.0.0.0/2”, “::fff:192.0.0.0/3”, “::fff:224.0.0.0/4”, “127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “192.168.2.54”],
//ipWhitelist: [“::ffff:192.168.2.1/120”, “127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.1.5”],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.3.0/28”],for Explanation my Home LAN is addressed with 192.168.2.x…
i have installed it with PM2
if i start it locally with
startx (cause “chromium-browser -Kiosk http://localhost:8080” gives an GTK-Error) and after that
DISPLAY=:0 chromium-browser -Kiosk http://localhost:8080" it starts but give me an Warn Message that Address “localhost” is already in use …any Ideas…
The last entrys for “ipwhitelist” i found were form one year ago…
basicliy i want to start it jast locally on my Pi …
-
@big11 said in ipwhitelist - a lot of issues... can't connect remotely ..:
address: “localhost”,
Try change address: “localhost” to “0.0.0.0”
-
And please use the Markdown features of the board when pasting code or logs.
-
got it … thank you…
but the ipwhitelist Parameter are not very handsome
so i did a
ipwhitelist: [],and that works…
further i will look for the correct Syntax to grant Access for Special addresses outside my LAN…
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login