Read the statement by Michael Teeuw here.
MM2 my first try
-
-
fine, i’ve done correct upgrade and manual install
mm² is running
i saw him then i stop it with alt key and quit optioni’m trying to setup the config.js file
and i wonder how i can restart the mm² programm again -
ok i’ve found that in term , in the correct directory, i write " npm start" and it start
i try to understand the config file, i just copied the sample file by changing his name
now i will try to change the city for the weather -
had the same issue with a brand spankin new installation of raspian noobs full and apt-get update/upgrade/dist-upgrade done. freshly set up. the install oneliner failed. only manual setup worked. using a rpi3. maybe there’s a broken dependency somewhere?
-
enought for tonight, i’ve got the weather in my town
not so bad for a first day and i dont speak of the weather -
it seems good, better than i used to think
but i 've got a few problem with forecast weather module
i cant see the predicted amount of rain.
i set up the option by true and it dont changes anythinkssecond problem :
i set up “colored” in true but
instead of having max and min temperature
i’ve got max and gap :
max temp is in red and gap is in bluethat sucks
any ideas ?
-
@seramik You can find the problem inside the modules by using the Developer tools. Acces this by using the shortcut ctrl + shift + i. When you have the developer tools open you can inspect elements and figure out errors by reading the console log and or relevant code for the element. There is so much more information there though :winking_face:
This really important tool will help you so much with fixing problems inside your MagicMirror. What also will help you is this forum and knowledge you gather. Good luck with figuring out your 2 problems! If you have more questions do ask!
-
true, no rain prediction, cauz of type of account on meteo site, i read it
for temp max and temp min, it seems to be an actual trouble,
TY for the tips, i’ve already found the proper section, where i 'll have to ask my question -
I helped a friend do a setup, we used :
- The latest RPi 3 B+
- Rasperian Stretch with Desktop and recommended software ( from https://www.raspberrypi.org/downloads/raspbian/)
- Software update prior to installation
The initial script failed on dependancies and depracated packages. Just could not get it to work.
Today I followed the instructions on :
- The RPi 3 B
- Rasperian Stretch with Desktop ( from https://www.raspberrypi.org/downloads/raspbian/ )
- no update
While I did get warnings, everything worked like a charm ( well - more or less - I forgot to copy the config.)
I know from another package ( https://octoprint.org/ - The OctoPi ) that some work needed to be done to support the RPi 3 B+ (Newer CPU ? Drivers ? Chipsets? - no really sure). Could this be the issue?
I will borrow his RPi 3 B+ and try again next week if no one else has comparables.
-
@alainchiasson said in MM2 my first try:
The initial script failed on dependancies and depracated packages. Just could not get it to work.
The installation script hasn’t been updated to handle some of the changes in the latest version of Raspbian. I would ignore it and follow the steps for a manual installation.
-
-
I too had the same problem with my attempt at installing the MM program. I found this on
https://www.w3schools.com/nodejs/nodejs_raspberrypi.asp. i used it as a long shot as i was running out of things to try. it worked and i now have MM up and running. I am using the AIY project file as install on raspberry pi 2. -
so second try : i decided to restart from the beginning
i tried the manual installation
first i install the node .js, no trouble, intall seems OK
but when i began " npm install && npm start", troubles appear :pi@raspberrypi:~/MagicMirror $ npm install && npm start
npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically unmaintained. Move on to something better. This package will continue to work with Grunt v1, but it will not receive any updates.
npm WARN deprecated nomnom@1.8.1: Package no longer supported. Contact support@npmjs.com for more info.electron-chromedriver@1.8.0 install /home/pi/MagicMirror/node_modules/electron-chromedriver node ./download-chromedriver.jssuccessfully dowloaded and extracted!
electron@2.0.16 postinstall /home/pi/MagicMirror/node_modules/electron node install.jsDownloading SHASUMS256.txt
[============================================>] 100.0% of 5.39 kB (5.39 kB/s)magicmirror@2.6.0 install /home/pi/MagicMirror cd vendor && npm installnpm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.4 (node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.4: wanted {“os”:“darwin”,“arch”:“any”} (current: {“os”:“linux”,“arch”:“arm”})added 82 packages from 57 contributors and audited 220 packages in 15.75s
found 4 low severity vulnerabilities
run npm audit fix to fix them, or npm audit for detailsmagicmirror@2.6.0 postinstall /home/pi/MagicMirror sh installers/postinstall/postinstall.sh && npm run install-fontsMagicMirror installation successful!
magicmirror@2.6.0 install-fonts /home/pi/MagicMirror cd fonts && npm installadded 1 package from 1 contributor and audited 1 package in 8.517s
found 0 vulnerabilitiesnpm WARN grunt-stylelint@0.10.1 requires a peer of stylelint@^9.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN acorn-jsx@5.0.1 requires a peer of acorn@^6.0.0 but none is installed. You must install peer dependencies yourself.added 930 packages from 1367 contributors and audited 2433 packages in 210.933s
found 23 vulnerabilities (8 low, 14 moderate, 1 high)
run npm audit fix to fix them, or npm audit for detailsmagicmirror@2.6.0 start /home/pi/MagicMirror sh run-start.shStarting MagicMirror: v2.6.0
Loading config …
WARNING! Could not find config file. Please create one. Starting with default configuration.
Loading module helpers …
Initializing new module helper …
Module helper loaded: updatenotification
No helper found for module: helloworld.
All module helpers loaded.
Starting server on port 8080 …
Server started …
Connecting socket for: updatenotification
Sockets connected & modules started …
Launching application.
Shutting down server…
Stopping module helper: updatenotificationso, as resquest, i run npm audit for fixthis
pi@raspberrypi:~/MagicMirror $ npm audit fix
npm WARN acorn-jsx@5.0.1 requires a peer of acorn@^6.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN grunt-stylelint@0.10.1 requires a peer of stylelint@^9.0.0 but none is installed. You must install peer dependencies yourself.jshint@2.10.1 added 4 packages from 4 contributors, removed 7 packages and updated 13 packages in 44.656s fixed 13 of 23 vulnerabilities in 2433 scanned packages 2 vulnerabilities required manual review and could not be updated 1 package update for 8 vulns involved breaking changes (use npm audit fix --force to install breaking changes; or refer to npm audit for steps to fix these manually) pi@raspberrypi:~/MagicMirror $and i still have thoses 2 warnings who seems bad
-
@seramik - Warnings are just that: warnings. I usually ignore them and concentrate on errors. Errors will prevent your mirror from working.
This, OTOH, is important:
WARNING! Could not find config file. Please create one. Starting with default configuration.
To fix this, you need to copy the included sample configuration file to its final destination. This will become your working configuration file and what you will edit as you add modules.
cd ~/MagicMirror/config cp config.js.sample config.jsSo now when you want to change the behavior of your mirror, you will edit the
config.jsfile. -
it is OK for the config file, i’ve got the old one
-
ok guys, some news
my rpi works fine, modules seems OK
i just buy wood for the frame, i need to cut, and glue that before painting
the glass is ready
i will try to put my picam behind the glass and i will try to have facial recognition just for funi choose to put off my mirror every night with crontab fonction ( poweroff) and i decided to install a switch on RUN contact to put my mirror on
the old TV is now ready too, plastik are away, i still dont know if i keep speakers or not,
here is a view of it :
http://zupimages.net/viewer.php?id=19/13/wivu.jpg
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login