@sdetweil thanks again, I now at last have the small meters showing, but now it’s not registering any speed at all 🤔 @bhepler, any suggestions?
It’s all zero?

@Bungle68 this is my current set up in the config.js

{
      module: 'MMM-SimpleLog',
      position: 'top_left',      //This can be any of the regions. 
      config: {
 //The config property is optional. 
      file: ["~/home/mipi/MagicMirror/modules/MMM-SimpleLogo/Pi.png"]
     width: '300px'      }
},

However, it’s not showing any picture on the screen, or any errors? Has anyone used the SimpleLogo and can share the config?
🙏

Hi, I’m having issues with the above module. It just shows up a line with Internet Monitor on the screen (header), but nothing else?
Any thoughts?

{
module: ‘internet-monitor’,
position: ‘top_left’,
header: ‘Internet Monitor’,
config: {
type: ‘minimal’,
maxTime: 20000,
updateInterval: 50000,
verbose: false,
displayStrength: false,
displaySpeed: false,
strengthIconSize: 80,
maxGaugeScale:1000,
},
},

@MMRIZE I’m thinking that probably going to be the easier option.
Just need to make time to get it done. 👍

Hi all
It’s been a long time since I was last here.
I’ve not used my MM for over a year.
I’ve just booted it up and I need to update the MM software, as it’s 219 comments behind.
Will I just be better off with a fresh install?
I can’t even remember how to upgrade it.
Any help would be appreciated 🙏

My mirror has been working perfectly for ages now. Can I ask the best way to deal with updates? Either the main MM firmware or module updates.
It’s been that long since I updated mine, I completely forgot and have now messed it up, so have to start over.
Which is a total pain. So any help would be greatly appreciated 🙏

I’ve been using MMM-Jast for a while without any issues. However, as I was 2 updates behind, decided to update it.
Now it’s working, but the ticker speed is so fast, I can’t read it.
The speed is set at 3.5, any suggestions?!

@sdetweil it’s just an image I want to display on the screen. It’s not a module either, just code on the config.js

@sdetweil always learning 👍

@sdetweil I’ve changed the path, but do I need the []either end?

{
       module: ‘MMM-SimpleLogo’,
       position: ‘top_left’,  //This can be any region.
       config: {
                // The config property is optional.
                file: [“~/MagicMirror/modules/MMM-SimpleLogo/Pi.png”],   // See config options.
                width:     ‘300px’,
      }
},

       

@sdetweil here, let’s try again

code_text
{
module: ‘internet-monitor’,
position: ‘top_left’,
header: ‘Internet Monitor’,
config: {
type: ‘’,
serverId: “53937”,
maxTime: 20000,
updateInterval: 30000,
verbose: false,
displayStrength: false,
displaySpeed: true,
strengthIconSize: 80,
maxGaugeScale: 1000,
wifiSymbol: {
           size: 50,
           fullColour: ‘#3afc25’,
           almostColour: ‘#ffff0c’,
           halfColour: ‘#ff1111’
    },
           },
},

@sdetweil thanks again, I now at last have the small meters showing, but now it’s not registering any speed at all 🤔 @bhepler, any suggestions?
It’s all zero?

Hi, I’m having issues with the above module. It just shows up a line with Internet Monitor on the screen (header), but nothing else?
Any thoughts?

{
module: ‘internet-monitor’,
position: ‘top_left’,
header: ‘Internet Monitor’,
config: {
type: ‘minimal’,
maxTime: 20000,
updateInterval: 50000,
verbose: false,
displayStrength: false,
displaySpeed: false,
strengthIconSize: 80,
maxGaugeScale:1000,
},
},