A magic mirror is the ideal place for showing the state of lights, window contacts, and other labels from openhab on a floorplan of your house / apartment! I already implemented this inside main.js of the old version of the magic mirror, but this does not work with MM2. So I re-implemented the entire module to be properly configurable and with push events via http requests instead of polling. This way, state changes of lights / window contacts / labels are immediately updated on the magic mirror :-)

To comfort configuration of the module, there is a draft mode which shows all configured items:

In regular mode, lights are only shown if they are switched on, window and door contacts are only shown if they are open, and labels are shown with their actual contents.

Labels can actually be configured for any item, for example:

• Currently played title from sonos speaker or another internet radio
• Current channel on your LG, Samsung, or Panasonic TV
• Fan speed of your Swegon ventilation system
• Current state of your Somfy Rollershutters
• Basically each item which is fed by an openhab binding

Check out the module page for instructions how to set up your individual floorplan.
Please vote this topic up, if you installed and enjoy this module :-)

I created a module that lists a nice weather chart from www.yr.no, optionally with or without border: mmm-weatherchart

Nice work, this module is a handy one!
I have another feature request: HIDE_ALL and SHOW_ALL to hide / show all modules at once :-)

@teddy Sorry for the late reply, I didn’t check the forum for quite a while. But from your post, I don’t know how to help. It’s as if you say “my car is not working, what am I doing wrong?”
If you want some help, please check logs for errors and post them here.

@zdenek It should be possible to run openhab on the same RPi. I didn’t try it but I don’t see any reason why it should not work. You only have to change the port of one of them because both use 8080 by default.

Sorry that I did not reply earlier - I simply didn’t see this topic. If you have bugs, either trigge rme with a PM, post your issue in the original thread, or in the github project.

Please change the ‘draft’ option to ‘false’, otherwise you are still in draft mode where the actual values are of course not shown ;-)

@schummi84 @YourhighnessLeender : OH2 has a slightly different JSON format in items response which I had to deal with. Please pull latest changes, set new ‘version’ option is your config, and try again.

@schummi84 I’ll test that as soon as I find some time - maybe tomorrow, maybe next week.

@schummi84 Please open http://192.168.2.122:8080/rest/items to get a (huge) list of all items that are available via the REST API. I realized that items that are automatically created via the Paper UI get an auto-generated name. However, you should be able to find them in the huge list of all items by searching the item labels.

For example, the Paper UI created yahoo weather item ‘Luftfeuchtigkeit’ has item name ‘yahooweather_weather_berlin_humidity’ on my setup. Then the item URL for such an item would be: http://192.168.2.122:8080/rest/items/yahooweather_weather_berlin_humidity

@schummi84 that sounds strange, it seems as if the rest api does not cover all items. I’ll try to check that as soon as I find some time.

@schummi84 Please make sure your openhab installation has the REST API installed/enabled. You can check that in a browser, e.g.: http://localhost:8080/rest/items/Light_Garden_Garage
The result should be similar to this:

{
  "link": "http://localhost:8080/rest/items/Light_Garden_Garage",
  "state": "OFF",
  "type": "Switch",
  "name": "Light_Garden_Garage",
  "label": "Garage",
  "tags": [
    "Lighting"
  ],
  "groupNames": [
    "Garden",
    "Lights"
  ]
}

Does that work for you? If so, please write the URL of one of your items.

@schummi84 did you try the adjustments explained in this issue? https://github.com/paphko/mmm-openhabfloorplan/issues/1

@racampbellky I don’t think so. But you may check the website of yr.no, maybe you find a setting to use Fahrenheit in that diagram: http://www.yr.no/place/United_States/New_York/New_York/hour_by_hour.html
If so, it should be possible.

Nice step, a dedicated module database :-)
However, via chrome for Android, I am not able to upload an image for my module…