Ottimo lavoro…potremmo creare una community per developers italiani ;)

Ti ringrazio dell’info…mi sono unito al canale!

@Mykle1
I could test but I need your assistance 'couse I’m not a programmer
I’m just good following guide… :(

It could be fine if someone really skilled test Hello Lucy server/client mode

ok so wait for @Mykle1

Ciao @DomenicHGaddy ti sottopongo subito il mio primo dubbio :)
Non so se hai avuto modo di provare, ma vorrei attivare un controllo vocale tipo https://github.com/mykle1/Hello-Lucy o simili in modalità server/client.
Secondo te è fattibile ?

@idoodler @bhepler
I Have setup chromium to autostart and it’s ok
But I would like use Electron to use the voice command on client like this one https://github.com/mykle1/Hello-Lucy or https://github.com/joanaz/MMM-MirrorMirrorOnTheWall but I don’t know if it’s doable in server/client mode

Pls help I cannot find any solution

@idoodler
This is the answer

pi@raspberrypi:~ $ pm2 log mm
[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
/home/pi/.pm2/logs/mm-error.log last 15 lines:
0|mm       | (electron:2017): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2027): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2037): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2047): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2057): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2067): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2077): Gtk-WARNING **: cannot open display:
0|mm       | Client:
0|mm       | (electron:2093): Gtk-WARNING **: cannot open display:

@idoodler I have tried to start changing the mm.sh
This is the command I’ve put in:
cd ~/MagicMirror
node clientonly --address 192.168.2.100 --port 8080

but when I restart raspberry the system show me only the desktop and MM seems don’t start

Hi all
I have a MM on my Ubuntu server and it seems to work fine, i can watch on 192.168.x.x:8080 on my browser.
Now the question is…the only way to watch the mirror on a Raspberry pi3 client is by chromium or there is a way with electron ?
I tried to change my mm.sh with: node clientonly --address 192.168.2.100 --port 8080 but I got error:

pi@raspberrypi:~/MagicMirror $ node clientonly --address 192.168.2.100 --port 8080
Client:
(electron:1213): Gtk-WARNING **: cannot open display:
There something wrong. The clientonly is not running code 1

Some help to solve ?