@robiv8
There is missing a config for “Button_Pressed”, but this doesnt matter right now, the module seems to be broken because of the yahoo API. I opened an issue for the module.
How many buttons are connected to your pi?

Axled

@robiv8
Do you only select page6 with your buttons? For playing a video with MMM-Podcast you need 2 things:

1. video must be downloaded to pi (does the module itself, but your not able to play it, unless it is downloaded complete)
2. you have to send a notification BUTTON_PRESSED to MMM-Podcast (see line 77 https://github.com/PtrBld/MMM-Podcast/blob/master/MMM-Podcast.js

AxLED

Hi, if the to monitors are close together you can still view 2 different shows :-) .
I checked your 4 feature requests and added 2 of them in the module.
For the other two i can not promise, if they will be implemented.

AxLED

@evroom
Good to hear you had success and thanks for your challenge with more than one bouquet 😂, helped debugging the module.

AxLED

@evroom
Here is a screenshot of my Mirror

I have a PIR-Sensor (for turning screen on/off) and a rotary encoder connected (to the GPIO PINs of the Pi).

In the bottom right corner you see my “first” module MMM-Navigate which interacts with the rotary encoder.

So depending on the navigation menu i am able to:

• swipe pages (i have four)
• show Details to newsfeeds (opens website to the newsfeed)
• adjust brightness
• select dreambox channels
• start/stop streaming dreambox channels
• control the mirror (restart mm, shutdown, reboot)
• and for the future: everything which can handle the MM notification system

AxLED

@Cr4z33
You should be able to send notifications by voice commands also.
AxLED

@Cr4z33
I dont know if it makes sense, to use a favorite list of services/stations/channels that wont fit on the screen of MM, as the list is to long.

Start streaming can be done by selecting one service/station/channel (by using yourmmip:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-NEXT for example) and than start streaming by (yourmmip:8080/remote?action=NOTIFICATION&notification=DB-PLAY).

Do you have MMM-Remote-Control installed?
Se my previous answer to evroom.

AxLED

@evroom
How do you plan to interact with your MM?
I have a rotary encoder. Buttons or touch is also fine.
For the beginning you can use MMM-Remote-Control to send notifications.
I have to complete my Readme, that the sample links only work with MMM-Remote-Control

So install MMM-Remote-Control, open an browser, modify the links matching to your environment and you should be able to select channels and stream them.

Important: Try with SD Channels first, as for HD channels the mpg2 codec is needed.

AxLED

@cr4z33 said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

@axled OK gimme a minute and I send them.

@Cr4z33
Thanks for your files, one a fast view you also have more than one bouquet in “getallservices”, so my last fix should work for you also.

Try agit pull (master repository).

AxLED

@evroom said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

I sent the files

@evroom
Thanks for the files, i checked them and found an Error in MMM-Dreambox.js

My “getallservices” xml only has one “bouquet”, so i checked only for one.
As your “getallservices” xml has three “bouquets” i changed the code.

If you do a git pull (master repository) it should work.

So far i decided only to show the services/stations/channels of the first bouquet only, (userbouquet.favourites.tv) in your case.

AxLED