@Goldjunge_Chriz I’m interested but it’s too many unknowns. Where total price to Norway is one of them…

@yawns Where he say that?

Sounds interesting if you send to Norway!

@Goldjunge_Chriz he writes “Near Schweinfurt/Bavaria” almost at the end of the post.

@Phantom Even if the mirror is cheaper in England, what about the freight cost?

And do really glass work with a touchscreen?

@creepwood Did you try to restart mirror or manually refresh? I guess updates only happen on the interval you’ve configured…(?)

Btw, the “correct” answere, in my eyes, is three days, not two.

Here is a screenshot from my mirror earlier tonight (Monday at 21:47) that shows two activities in 2 and 3 days:

They are both in the same Exchange calendar and on the same day (Thursday) as you can see here:

If this isn’t a bug, then I don’t know.

Yes, I know that the culprit is probably Moments.js, but …

Depending on where the weight of the monitor will go, I don’t think it should be a problem.

What I did was to use carpenter’s squares to fasten the two left/right frames to the top. On this picture the top is the one with ventilation holes:

What you don’t see is that I’ve screewed to top frame to the left/right frame.

The weight of the monitor is on two pieces of wood that is screewed to the sides. Those pieces of wood keeps the monitor from falling back too. On this picture it looks like the weight go to the bottom frame, but that is not true:

I used a French Cleat. Look at my blog in the signature for details.

@KirAsh4 I agree with OP that this is an unnatural way of counting days for humans.

Wouldn’t it be possible to do different calculations based on if it’s more or less that 24 hours?

@bhepler I’m afraid it’s probably not the issue. I had the same problem when I replaced a mirror on the bathroom. It was just too dark compared to the one it replaced. The lighting where the same…

Hi @open_book, sorry for delay, I’ve been quite busy lately.

1. About the wrong time in your module: Have you configured “language” in the Magic Mirror config? If so, what setting?

2. The GUI refreshes if a change is triggered from the service with the interval defined in serviceReloadTime (default every 30 seconds) or by the GUI-side (when remaining minutes changes) with the interval of timeReloadTime (default every 1 second). Both service and GUI will only update if there IS a change. This is detected by comparing last output with current using a simple MD5 hash comparison.

The reason why I picked two intervals was that I wasn’t sure how often I could call Ruter API before they would, in the worst case, block me. I wanted to make sure GUI would show correct number of minutes all the time even if I didn’t call the Ruter API so often.

If you have many stops or display many items a change will of course happen more often. Could you record a movie if GUI updates even if there aren’t any changes (in remaining minutes, order of items etc)?

3. Anyway, I will in near future re-write my backend to accommodate multiple instances of the module. Will then also reconsider how I update GUI.

< Cato />

Really like the work you did to hide wires and the detail with reset-switch on the side!

Good job!

[1.0.2] - 2016-11-01

• Added timeToThere config value to stops
• Fixed duplication of journeys if manually refreshed

Cool! Now I want a DS just to have that module… 😀

Maybe I remember wrong, but I think SSH is turned on as default when you set up the RPi (Jessey)…?

You’ve probably already checked it, but be sure the SD card really is inserted in the Pi. It happened to me a couple of times…

Cool! Wonder if it would have driver for RPi…

I blogged about building MY mirror here: https://catoantonsen.wordpress.com/2016/09/24/magic-mirror-version-1.

@KirAsh4 Nah, too late now since the update window has passed… 😎