/Users/nicolareina/Pictures/Photos Library.photoslibrary/resources/derivatives/C/C6214C64-D77D-42C2-AA54-AF48C88068BB_1_105_c.jpeg

/Users/nicolareina/Pictures/Photos Library.photoslibrary/resources/derivatives/2/2FA7B3A3-CA8B-470D-99C9-BE17A7E4DE89_1_105_c.jpeg

32inch vertical.
Custom wooden frame.
Kinect Mouse tracking gestures.
Camera
MicroWave Sensor behind mirror
4 Momentary + 4 Toggle Switches on the side for custom controls
Remote & original TV switched working on top
Logitech Speakers on top frame

Multi Year project…

@sdetweil interested too.
I have my TV stock but it sounds terrible

Yes you are right. I would just like dialogue to start.

that is go here and ask for open dialogue https://github.com/MichMich/MagicMirror/issues/2130

currently all modules developed by bougsounet are offline due to some issue with MM project founder.
If you want them to go back online please invite the MM project owner, michmich, to have a dialogue.

@mcretu Hi . Lost in the Post.
I think you refer to youtube not being displayed.
If that is the case, as @Bugsounet keeps saying (he said it to me about this…), red the wiki. It’s all there.

you need to change the config.js in config as follows:
https://github.com/bugsounet/MMM-Assistant2Display/wiki/Configuration

Assistant2Display need electron special configuration for web link displaying and Youtube functionality

start of the config.js configuration file

var config = {
  address: "localhost",
  electronOptions: {
    webPreferences: {
      webviewTag: true
    }
  },
  port: 8080,
...
address should be localhost for playing YouTube video
electronOptions is need if you want to display the link and Cast module

A big thank You to @Bugsounet for his help in troubleshooting.
It was nothing to do with the modules but with my asoundrc config.
the ouput card/device were not correct.
Thanks again!

@sdetweil nope I just grep my grep :-D

@dvbit said in mmm assistant mk2:

HDMI

One little Step ahead.
Disabling Audio Output gives no audio feedback but then the mirrorr goes back into waiting state.
So it get’s stuck in “Spinning State” because the audio fails.
Maybe it’s obvious but I think it is interesting.

and this from the log is also useful:

[2020-06-01 19:27:11.533] [LOG]    [SNOWBOY] Retry restarting...
[2020-06-01 19:27:13.588] [LOG]    [LPCM16] WARN: arecord: main:828: audio open error: Device or resource busy

[2020-06-01 19:27:13.589] [LOG]    [SNOWBOY] Retry restarting...

So my audio ouput device is "owned " by some other process I guess

aplay -l gives:

pi@MagicMirror:~/MagicMirror $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1]
  Subdevices: 4/4
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones]
  Subdevices: 4/4
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3

@Bugsounet So I have "Output Device Settings " item greyed out in desktop sound menu.
entries:

• Analog
• HDMI
• USB Kinect Audio
• Output Audio Device Settings : Greyed out

Edit:
Before sending Firmware to Kinect after boot (to enable it) the Ouput Device Settings Option is NOT there (also no Kinect Audio available)
After sending it both Kinect and Output Deive Settings Appear

trying to play the response using cvlc works but there is a PulseAudio error:

VLC media player 3.0.8 Vetinari (revision 3.0.8-0-gf350b6b5a7)
[01cb1d60] vlcpulse audio output error: PulseAudio server connection failure: Connection refused
[01cd0fc8] dummy interface: using the dummy interface module...

Now rebooting and trying the plugin without uploading kinect audio firmware.

By the way the Pulseaudio refuse seems to me consistent with the failed audio for the plugin

DOH! I cannot try the plugin without the kinect audio firmware pushed (no other mic is attacched)

@Chris said in mmm assistant mk2:

Small feedback after installation and use:

it works very well.

• I find it more fluid than the previous version. when invoked, it responds almost instantly. Before I used MMM-Hotword. I went on the integrated snowboy. Perhaps the speed of response comes from there.

• I have multi task. I can play a youtube clip on the mirror and at the same time ask the assistant for a home automation or other command. Before that did not work.

• I go through the Sony PS3 eye for the listening part. I did not have a problem with this one after the update.

In short, that happiness.

@Bugsounet
The work you have done is truly superb. Congratulations to you all.

Regards,

Hi One question: were you successful with the sound wizard setup?
Could you share the asoundrc file (hidden file located in your home directory)?
I agree the plugin is just perfect (had it working but then I broke something)

@sdmydbr9 this happened to me too. It’s just that the error that is happening has a side effect the deletion of the index file. repull it.
After fixing the main problem this will not happen anymore

1. If I find a good proposal on ebay I can buy you one . After all you are doing for the community if you like it’s a minimum. Should I look for France as delivery? It will work just with a Raspberry 4 however (below are not powerful enough). I really would like to be able to program in JS . I am dreaming of a play plugin like this https://www.youtube.com/watch?v=KLOB-T1mgdY . My son is waiting for it since he saw the video :-D. Ok I confess: I would like too
2. Do you refer to the chromium top? I am testing so I do launch it not in full screen (But I tried in full screen too)

@Bugsounet @sdetweil https://drive.google.com/file/d/1mFsoz7ozNJ8Lc0-774D56SGqROIo3CP_/view?usp=drivesdk

eheh jumping from a pc (cleaning lady chased me away(, to another to a phone (discharged), to another PC.

the short clip above is the MM started .
I ask what time is it in italian
answer is retrieved
display but no audio
then keeps spinning
If I refresh through vnc, spinning goes away (I haev not tried another invocation)

@Bugsounet I will ask your advice on a simple js helper plugin for the C kinect gesture proggie I wrote. It would be nice to integrate it in a2d plugin

@Bugsounet :-D

S*t I was sent away from the leaving room where I have the mirror by the cleaning lady :-)

Cannot interact with it for a couple of hours.

Still hanging after query.
I am uploading a video to Google drive of an interaction.

It is as if the plugin was not receiving the feedback of response given.
Keeps spinning

@Bugsounet and it is

-rwsr-xr-x 1 root pi 4202140 May 30 12:38 chrome-sandbox

@sdetweil Thanks I removed the final quote as I was ending up with a prompt

will try again now with

done it from MagicMirror folder.
Can I see any file being changed somewhere?
I did a ls -la in
~/MagicMirror/node_modules/electron/dist
and there seems to be no change there