Offline
A short look on this module before going out for work (and maby later for a drink) to check if you are properly dressed for the weather next 8+ hours.
What do you think about it? I am happy to read your thoughts.
[card:fruestueck/MMM-WeatherDependentClothes]
@cowboysdude Thanks! I really do and don’t wan’t to miss it. It may sound silly but it takes the burden of choosing e.g. between shorts and pants around 16°C with a quick look off my sholders.
@mikey20333 I’m sorry you’re experiencing troubles. As mentioned above, I’m rather inactive with MM right now and wouldn’t be much of help. Not sure if the issue is comming from my repositiory beeing a bit of age. Thankfully @lavolp3 offered his troubleshooting guide. Have a peak into it, good luck!
If after this, the issue isn’t solved you could try uploading your config (please remove any private api keys before). I can’t gurantee finding the bug but it’s a shot if the guide doesn’t help.
@lavolp3 Thank you for your support
@themurm523 There was a comma missing after appid in the readme. Thanks to doctor74 for his PR.
Does this fix your issue?
@mikey20333 said in MMM-WeatherDependentClothes - Be properly dressed:
Hello, i have a problem with the module
Does this also fix your issue mikey20333?
@cowboysdude Thanks! I really do and don’t wan’t to miss it. It may sound silly but it takes the burden of choosing e.g. between shorts and pants around 16°C with a quick look off my sholders.
@mikey20333 I’m sorry you’re experiencing troubles. As mentioned above, I’m rather inactive with MM right now and wouldn’t be much of help. Not sure if the issue is comming from my repositiory beeing a bit of age. Thankfully @lavolp3 offered his troubleshooting guide. Have a peak into it, good luck!
If after this, the issue isn’t solved you could try uploading your config (please remove any private api keys before). I can’t gurantee finding the bug but it’s a shot if the guide doesn’t help.
@lavolp3 Thank you for your support
Thanks @lavolp3. I’ve uploaded this module and finished my mirror 10 months ago and since then I was rather inactive. Had a quick peek into yours and it’s a nice idea - especially as it is for your kids.
Yeah, feel free to let me know if you find anything worth chainging in WeatherDependendClothes (except the somewhat unlucky and hard to spell name). ^^
Good luck and have fun building!
Hey Kai,
if I remember correctly the module simply checks the values specified in the conditions with the fetched weather data values. So if you specify conditions in imperal units and also request imperial weather data, it should work out just fine. Can’t tell for sure as I’ve no time for checking. You could test it and let us know.
Best,
Frühstück
Thank you @AxLed !
I forgott to mention a power & a reboot button attached to the GPIO Pins and exactly that (false positive reboot-script execution) was the root of the Problem. I solved it with rechecking the pins for LOW-state after a 1/10 of a second.
This issue bugged me for several months. Thank you again!
Hey Everyone!
My MagicMirror shows strange behavior since Minute one. When a Light somewhere in our Apartment is switched on or off there is a chance that the Raspberry Pi 3B+ does a reboot. Happens approx one out of three times.
Hardware:
I thought, the Monitor could give some bad electricity spike to the RPi and switched over to an VGA Cable but that did not help. I’ve also tried a bowerbank instead of a charger with no luck.
Sadly I can’t find any helpful links on google as the keywords “switch, light, reboot” are often used for other projects.
I am happy for any advice, thought and idea you may come up! : )
Greets,
Michael
A short look on this module before going out for work (and maby later for a drink) to check if you are properly dressed for the weather next 8+ hours.
What do you think about it? I am happy to read your thoughts.
[card:fruestueck/MMM-WeatherDependentClothes]
@in_a_days that was my mistake. thank you, very much aopreciated. xD