@Mykle1 - fantastic job man!!!
I like it

Hi,
I have the MMM-PVOutput module running on the MM, which shows me the output of my solar panels.

Today I installed the internet-monitor module and since then, I get no data anymore on the PVOutput.

I ran in dev mode and noticed this error:

how can I solve this?

thanks
Johan

@ Bangee
installed modules as described in read.me file but I get no reading of temp or hum.
sensor is working, tested with AdaFruit example

sudo ./AdafruitDHT.py 2302 27 (Data connected to gpio 27)
I get a perfect temp & hum reading, so i’m shure sensor is working.
i’m using an RPI3 - according to wiring pin, wpi 2 = gpio27 = physical pin 13.
I think wiring is OK.

only clock and this module installed.

@cowboysdude
nothing, all is perfect - no errors.

yesterday tried every pin, nothing happens.
Only module clock & this DHT22 module are in my config.
Remover & reinstalled module.
No luck .
I thought sensor might be defect but I get a reading of temp & hum via the Adafruit DHT test program.
I’ve seen other people have same problem - no reading. I’m wondering if they have sorted out or just gave up on this module.

@QNimbus
Hi, I have a Youless and would like to display the energy consumption on my mirror.
I’ve installed module, but when I execute there is nothing on the screen, so I ran in dev mode and noticed this error:
“Error on loading script: modules/MMM-YouLEss/jsGauge/lib/jsGauge.js”
indeed when I look in the directory, jsGauge, this is empty - no script.
After install, I ran "$ cd MMM-YouLess && npm install --only=production.
but when doing this, it gives me following
mmm-youless@0.1.1 postinstall /home/pi/MagicMirror/modules/MMM-YouLess cd jsGauge && npm install && npm run minify
and this keeps repeadingly running - so after getting 30 times or more this message I’ll stopped.
can you take a look at the installation procedure.
I would like to have this up & running
thx

@cowboysdude
I did, but got message that topic where old and that is was better to create new topic - so i did.
anyhow i’ll post it there as well

@mrbone66
wow! very neat.
I like it - i’m afraid to show the picture to my wife.
I already hear her saying: “why can’t you make such a nice mirror”.
but yeah, I have my limits …

nobody to help?

Re: MMM-DHT22 Humidity and Temperature Module

installed modules as described in read.me file but I get no reading of temp or hum.
sensor is working, tested with AdaFruit example

• sudo ./AdafruitDHT.py 2302 27 (Data connected to gpio 27)
  I get a perfect temp & hum reading, so i’m shure sensor is working.

i’m using an RPI3 - according to wiring pin, wpi 2 = gpio27 = physical pin 13.
I think wiring is OK.
anybody can help solving this.
thx

@QNimbus
Hi, I have a Youless and would like to display the energy consumption on my mirror.
I’ve installed module, but when I execute there is nothing on the screen, so I ran in dev mode and noticed this error:
“Error on loading script: modules/MMM-YouLEss/jsGauge/lib/jsGauge.js”
indeed when I look in the directory, jsGauge, this is empty - no script.

After install, I ran "$ cd MMM-YouLess && npm install --only=production.
but when doing this, it gives me following

mmm-youless@0.1.1 postinstall /home/pi/MagicMirror/modules/MMM-YouLess cd jsGauge && npm install && npm run minify

and this keeps repeadingly running - so after getting 30 times or more this message I’ll stopped.

can you take a look at the installation procedure.
I would like to have this up & running
thx