Offline
Hi,
I want to use SimpleLogo more than once, to show different pictures/logos in different places on the mirror. Assuming that is possible, is it just a matter of entering it into the config.js for each use? e.g. The first instance for one picture and the second instance for another picture in a different location at the same time?
I hope that was clear enough
Well, I don’t know about anyone else but I have a few “insults” thrown in, just for good measure.
For me:
“You look like shit!”
and
For my wife:
“You look fat in that dress!”
@yawns Exactly what I was looking for. Thanks
@ottobot - Good luck with yours. Everything I read, before actually buying the mirror, hinted towards a “rigid” mirror. I wasn’t even sure the 3mm was going to do the trick but I was happily surprised. It’s pretty much plexiglass with mirror capability, and yes, the price is reasonable.
Oh yes, that worked perfectly. I couldn’t wait to get home to try it. Thank you, very much.
If I may ask: Now that I can see MM running on the Pi3 from another computer on my network, can I merely view it or is there some control of MM that I can use remotely? If so, can you direct me to where I can find those commands? If I should ask this question elsewhere then I apologize. Kindly direct me to where I should ask, if this is the case.
Again, thank you for your assistance and time and effort on my behalf.
@morozgrafix - No worries about the delay at all. I appreciate your time and assistance.
I wish I could try that right now but I have to go to work. I will try the moment I get home and let you know how I make out.
In any case, thanks for the help.
“Don’t forget to restart MM app after making this change.”
I did restart the app, and a reboot when that didn’t work
So sorry to revisit this problem but I can’t seem to access MM on my local network, too. I did what you suggested and edited the ipWhitelist setting in my config.js file. See below:
var config = {
port: 8080,
ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1", "192.168.1.1/24"],
language: 'en',
timeFormat: 12,
units: 'imperial',
On my PC (192.168.1.4), I enter the Pi3/MM computers IP address of 192.168.1.15:8080 in a Google Chrome browser window. The browser window reports this:
This device is not allowed to access your mirror.
Please check your config.js or config.js.sample to change this.
Any help would be greatly appreciated.
Peace
@JbeesonMagic16
I almost posted the same exact problem but I found this page (thread?) (Whatever), but due to the help you received and your last comment about the private link to google calendars ical, I was able to resolve the issue without asking the question. This place is awesome. :-)
Up votes for everyone!
Tapplastics.com has a bunch of California locations where you can walk in and walk out with your 2-way mirror, if you choose them. They cut to size right on location. I wish I had that here. I wound up going with the link below the locations.
El Cerrito, CA
Fremont, CA
Mountain View, CA
Pleasant Hill, CA
Pleasanton, CA
Sacramento, CA: Auburn
Sacramento, CA: Florin
San Francisco, CA
San Jose, CA: Blossom Hill
San Jose, CA: The Alameda
San Leandro, CA
San Mateo, CA
San Rafael, CA
Santa Rosa, CA
Stockton, CA
Hi,
I am almost done making my MagicMirror. I used this:
If you have access to Amazon then this might help you. You can choose thickness and different sizes. I chose the 3mm thickness because I was afraid that the 1mm would be too flimsy and cause mirror distortion. I am quite pleased with its ability to “mirror”. I don’t know anything about applying film. Good luck.
I’ll post a picture when my mirror is completed.
FYI, I live in New York. I hope you don’t mind getting advice from an American :musical_score:
Peace
And I surely will. I think all of this stuff is amazing and I’m learning as quickly as I can. I’ll be glad to help when I can. I wanna get me some of those ^
Peace
As promised, I gave you as many ^ as this page would allow. You spent a considerable amount of time and effort in helping me solve my problem and I appreciate that. I kept clicking ^ on your posts but each would only permit +1. Again, many thanks.
Peace
Thanks for pointing that out for me. I gave you an ^ as well, for taking the time to teach me that…
I gave you as many ^ as this page would allow. You spent a considerable amount of time and effort in helping me solve my problem and I appreciate that. I kept clicking ^ on your posts but each would only permit +1. Again, many thanks.
Peace
Peppa,
I don’t know how to thank you. That last edit you made did the trick. I am absolutely thrilled right now. I will take your advice and visit http://jshint.com/. I’m going to add, “Peppa made this happen!” in my compliments module.
Peace, and best regards,
Mykle (New York)
P.S. If there is a rating system here, I will find it and give you highest of praise.
First, let me thank you for assistance. You are most kind. Then, let me apologize that I don’t know how to post the code in that nice frame, as you did. With that, I think I added the code as you advised, yet MagicMirror reported an error in the config, again. I am trying to add the module “planetrise” as shown below. In this case, between “updatenotification” and “clock.”
},
{
module: "updatenotification",
position: "bottom_bar"
},
{
module: 'planetrise',
position: 'top_right', // This can be any of the regions.
header: 'PLanet Rise',
config: { // Place the latitude and longitude of your mirror
latitude: 45.5,
longitude: -122.38,
// A dictiory of the bodies and unicode character for the symbol
// This is the default and does not need to be listed.
// A full list of bodies can be seen on line 1359 in astronomy.js
// Note: Trying to find the rise time of Earth will crash the Module
bodies: {'Sun': '☉',
'Moon': '☽',
'Mercury': '☿',
'Venus': '♀',
'Mars': '♂',
'Jupiter': '♃',
'Saturn': '♄',
},
{
module: 'clock',
position: 'top_left'
},
{
module: 'calendar',
header: 'US Holidays',
position: 'top_left',
I clone a third party module into my /MagicMIrror/modules folder and NOT into my modules/default/ folder? Where do I add the accompanying code in the config.js file? I’ve tried at the end, just after the last default module code (newsfeed) and I’ve tried at the beginning (before ‘alerts’) and I’ve tried in the middle between various default modules. Most of the time I get the error from MagicMirror that there is an error in the config file. Once or twice MagicMirror ran but no new module appeared (Only the default modules appeared). I’ve been at this for weeks. I’m completely new to all of this and I hope someone has the patience and generosity to help an old guy. I’m amazed at how brilliant you all are. You have made it easy enough for me to get this far. So, please help me if you can. Best regards - Mykle (New York)