seems to work. thank you!
Read the statement by Michael Teeuw here.
Posts
-
RE: Frameless Illuminated Motion Sensitive SmartMirror
@PtrBld Hi and thanks!
I will update the original post regarding that information!
-
RE: Frameless Illuminated Motion Sensitive SmartMirror
After I put the mirror glas onto the frame, I turned it around, took it by the frame and shook it as hard as it was possible. Nothing happened :D
Like you can see in the video in the product description (unfortunately it is in german) of the tape that i used, they fixed more than a 10kg weight to a wall. Actually the mirror glas has a relatively minor weight of about 6.5kg ;) AND I used about 20 times as much of the tape, like they did in the video.
I was more worried about the screws that i used to fix the mounting of the frame. :D
-
RE: Problem with to Magic Mirror on one pi
For first instance you could just remove the entry from pm2. So that just one MM gets started at system startup. Do you really need to deinstall the other one? You could just disable it.
-
RE: Frameless Illuminated Motion Sensitive SmartMirror
Hi and thanks!!
I actually do not have something like a build log. But I will post some more pics here. -
RE: Forum Errors....
I also have some problems with uploading images.
It gives the following error message :
Error Something went wrong while parsing server response
-
Frameless Illuminated Motion Sensitive SmartMirror
Hey
I want to show you my smartmirror powered by Magic Mirror.
I made a Video to show it to you in action.
VideoLet me know what you think!
Some more Details:
The mirror’s measurements are 80cm x 55cm. While the ones of the frame are 70cm x 45cm. So that the mirror glas juts out the frame by 5cm on each side. It has a thickness of 6mm.
I got the mirror from a glazier around my town. Unfortunately it is a german contact. On the delivery note it was mentioned asESG Mirastar-Spionspiegel
(Spionspiegel = “two way mirror”).I built the “frame” by myself. Actually it is rather a box than a frame. When standing in front of the mirror you won’t be able to see it.
I attached the 21" monitor to the frame.
The frame is attached to the mirror.
I used a special double-sided tape to fix the mirror to the frame.
In the picture below you can see that the tape is transparent.
I chose that one, because if it was a white one it could reflect light and it may be seen when you stand in front of the mirror. Therefore the box is also painted black.