Hi everybody,

i have a problem with my magic mirror implementation.
If I use a fresh download of MM2 and activate in the config file the newsfeed or the calendar, I got an error on the console:
ReferenceError: io is not defined
Stack:
MMSocket() socketclient.js:11 Module<.socket() module.js:160 Module<.sendSocketNotification() module.js:298 .addCalendar() calendar.js:279 .start() calendar.js:67 startModules() loader.js:55 loadModules/loadNextModule/<() loader.js:40 loadFile/stylesheet.onload() loader.js:190

The error occurs on socetclient.js on line 11.

My config file:

{ module: 'newsfeed', position: 'bottom_bar', config: { feeds: [ { title: "New York Times", url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml" } ], showSourceTitle: true, showPublishDate: true } }, { module: 'calendar', header: 'US Holidays', position: 'top_right', config: { calendars: [ { symbol: 'calendar-check-o ', url: 'webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics' } ] } },

If I comment this lines out, the time and the weather is working.

I hope you can help me, thank you!
ascore5000

Note from admin: Please use Markdown on code snippets for easier reading!

Hello. I am a complete n00b to programming and need help making sense of these instructions for a magic mirror module. I used (https://forum.magicmirror.builders/topic/236/complete-setup-tutorial/2) to set up the magic mirror running on a raspberry pi 3. I got all of that working but I cannot figure out how to get this (https://github.com/SVendittelli/MMM-fitbit/) module to work. I am having probelms figuring out how to get the dependencies working. They error out by saying they have no such directory. Could someone please help me figure this out or explain the steps in more detailed so a brand new person in the world of code could understand. Any help is greatly appreciated.

I am having trouble installing the fiitbit module linked below. How do I install the dependencies? I am new to coding. Do I have to move the MMM-fitbit folder into the modules folder? The instructions are as follows.

python-shell — npm install python-shell
python-fitbit — sudo pip install -r python/fitbit/requirements.txt

https://github.com/SVendittelli/MMM-fitbit

An extreme measure here would be to try this:

https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=41898&start=25

xscreensaver can be used right off the menu… you can set/turn on/turn off functions.

@KirAsh4
I finally got it running. It turned out that the sync.- problem is well known since May 2016.

–> https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=149221

stopped the ntpd with :

sudo systemctl stop ntp

rather than running ntpdate, ran ntpdate-debian:

sudo ntpdate-debian

started ntpd

sudo systemctl start ntp

check

sudo ntpq -p

Now I´m happy!!

Hello. I cannot figure out how to stop the screen from going black after a few minutes. I followed these instructions and it is still doing it.

"Step 3
Let’s disable the screen saver and screen blanking as well. This needs to be done in two places. First in the autostart configuration:
sudo nano /etc/xdg/lxsession/LXDE-pi/autostart

And add the following to the bottom of the file:

@xset s noblank @xset s off @xset -dpms

Next in the X-windows manager configuration:
sudo nano /etc/lightdm/lightdm.conf

Scroll down to the [SeatDefaults] section and look for the xserver-command line below that. Change the line to look like this:
xserver-command=X -s 0 -dpms (so you’re removing the # on the front, and adding the missing bits at the end.) Again, hit CTRL-X and say Y(es) to saving the file.

Step 4
A Raspberry Pi is configured to automatically shutdown parts of the hardware that aren’t actively in use. This includes the WiFi driver. This will cause MagicMiror² to occasionally fail to fetch updates for things like the newsfeed, weather, and others. You can disable the power saving feature for the WiFi from the interfaces configuration file:
sudo nano /etc/network/interfaces

Find the wlan0 section and add wireless-power off below it:"

My weather and news loads, but after like 3 hours it stops updating. It just stays on the same temperature.
Anyone know what might cause this. Im pretty sure my internet is good and stays connected.

So, should I re-install everything with the new guide?

If the missing coma doesn’t make it work I will anyway, thank you both!!

I am trying to add my appid to get the weather app running, but I can’t figure out how to configure it. What commands do I need to use to get the appid in the code and set up my location? This is my first adventure in the world of coding and am completely lost. Any help is appreciated.

I have my mirror set up to display both analog and digital clocks. The program scales accurately only up to “380px”. Any value higher than 380 though is just repeating the image instead of scaling larger. Any one else have this problem or an idea on a fix? I wanted it to be 600px. The Hour, minute, and second hand continue to increase to the proper size, but my clock face wont go larger than 380 without causing a tile effect

@shavesophere said in npm start dev:

@KirAsh4 sorry - i stand corrected! but that being said when i first started getting npm ERRS i tried this and it still did not work… anyway, moving forward now!

Well yeah, that’s different. If npm is giving you errors, no matter how you attempt to start it, the errors won’t magically go away. That’s like saying, the car won’t start if I’m sitting on the left side, maybe if I sit on the right side it might, but in reality there’s no gas in it. Switching seats isn’t going to fill the gas tank. :)

The Magic Mirror successfully comes up but I can’t seem to get the weather to load.

using “npm start dev” to load it I get the following:
“->currentweather: Could not load weather. logger.js:23”
and
“XMLHttpRequest cannot load”
“http://api.openweathermap.org/data/2.5/weather...etc...etc”
“No ‘Access-Control-Allow-Origin’ header is present on the requested resource. Origin ‘http://localhost:8080’ is therefore not allowed access”

it’s driving me nuts

if the heise feed is broken on server side, it will not work :)

there are already built tts and stt modules for magicmirror²

As he said, there is no mechanism to do that. However, using the carousel module, you can trigger all of the current modules to turn off and a different set to be displayed, effectively giving you a ‘2nd page’.

If you are talking about having something totally different, non-MagicMirror, on a ‘2nd page’, there is no way to do that.

Hi

Hello
i’ve got a problem…
more than once a day the clock quits working… sometimes after a few hours pm2 restarts automatically and the clock works again for a while…

Platform [ Raspberry Pi 3]: with the latest jessie-updates, uses just for magicMirror and as OpenVPN gateway (using pivpn)

Magicmirror Modules:
*clock (analog and digital)
*calendar
*weather & weather forecast
*compliment
*rss

monitor-switch off is via pir and python solved…

can anyone help me please, or does anyone have any idea?

@GHLasse Thank you. I will test it later.

I am starting similar project taking MagicMirror-1.0.0 as base.Wanted to know which js is used in that.As it is mentioned for latest it is Node.js…
what about MagicMirror-1.0.0

@Plati i have tried it. But than there will no data displayed.
@strawberry-3.141 Tahnks for your help, you are great.