MMM-homeassistant-sensors no icons after MM upgrade to 2.19.0

karsten13

@wmx said in MMM-homeassistant-sensors no icons after MM upgrade to 2.19.0:

What more infos do you need to find what’s going wrong here?

may a cors problem, are there any errors in the console?

I assume you are running this on a pi, can you test if this works in a browser http://<ip-address-of-the-pi>:8080 ?

sdetweil

@karsten13 on a desktop??

Snille

@wmx Hi, this has to do with “cors”, it’s not allowed anymore to load the pictures the way I do it, I have to rewrite stuff to fix it, I just don’t have the time… I’m currently loading the pictures form “internet” using a URL instead… It works, but not as nice as geting them from HA…

Like this:

values: [
	{
		sensor: "person.jane_doe",
		name: "Jane are %v%",
		displayvalue: false,
		icons: [{
			"default": "https://www.snille.net/img/magicmirror/users/jane.png"
		}]
	],
},

karsten13

@Snille

can you test "default": location.protocol + "//" + location.host + "/cors?url=" + old_ha_url ?

Since v2.19.0 there is a cors proxy inside mm which is used in the weather module and can be used by every other module.

Snille

@karsten13 Oh! I did not know that… I’m guessing this has to be done in the actual module somewhere? I have to see if I can figure it out. :)

karsten13

@Snille works only with latest mm release, you can test this before coding with "default": "http://localhost:8080/cors?url=http://your_not_working_url" (you have to adjust params to https or other port if necassary).

You find the corresponding PR here.

Snille

@karsten13 Hm… Not sure if that works, the “picture” is different depending om what the “sensor” is sending, so it’s not possible to set the “url=http://your_not_working_url” to something static… I’ll have to read up on it… :) Thank you!

sdetweil

@Snille you should be able to see the CORS error in the dev window.

however the url gets built now for the image, should be able to change it

wmx

@karsten13 , @Snille
Sorry for the delay, but hanks for your feedback.

Yes, I’m running MM on a raspi 3.
One more point I figured out:
The display connected to the raspi an showing THE mm on the wall has these problems with missing images.
If I connect with a browser from my desltop to the mm URL the images are visible.

I’ll try to test your given notes this weekend and return the results back here.

wmx

@Snille said in MMM-homeassistant-sensors no icons after MM upgrade to 2.19.0:

  icons: [{
  	"default": "https://www.snille.net/img/magicmirror/users/jane.png"
  }]

(think in the example there is one closing bracket missing “]”)

Had the time right now to test this one issue. I insertet the URL to the image from ha :-) (which is a static one here)

http://<my-ha-url>:8123/local/images/hem.png

but after restart of MM the problem still exists.