electron-rebuild problems with MagicMirror 2.22.0

[sdetweil]

@KristjanESPERANTO the ‘problem’ is that the module installs electron-rebuild in its OWN MODULE folder, and it can no longer figure out what electron version it needs to build for…

the only ‘fix’ is to install electron-rebuild in the MM folder (we should just install it to begin with in my opinion)
and to launch THAT version of eb…

[sdetweil]

@KristjanESPERANTO epoll binary is dependent on the Electron version.

no matter which lib drags it in … so you MUST run eb… to get it current…

see my prior post for the troubles…

NOBODY gives a crap about breaking changes anymore…
they all feel if you don’t update, then your code dies. and they don’t care…

[sdetweil]

@sdetweil and it succeeded on pi4 w bullseye… I also tested with my

upgrade script and backup/restore
and both those executed and did rebuild on the modules… (using the postinstall script)

[karsten13]

node@raspberrypi:/opt/magic_mirror/modules$ git clone https://github.com/sdetweil/MMM-Buttons.git
Cloning into 'MMM-Buttons'...
remote: Enumerating objects: 56, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 56 (delta 0), reused 2 (delta 0), pack-reused 52
Receiving objects: 100% (56/56), 11.86 KiB | 1.69 MiB/s, done.
Resolving deltas: 100% (25/25), done.
node@raspberrypi:/opt/magic_mirror/modules$ cd MMM-Buttons/
node@raspberrypi:/opt/magic_mirror/modules/MMM-Buttons$ ls -la
total 40
drwxr-xr-x 3 node node 4096 Jan  6 19:39 .
drwxr-xr-x 5 node node 4096 Jan  6 19:39 ..
drwxr-xr-x 8 node node 4096 Jan  6 19:39 .git
-rw-r--r-- 1 node node  530 Jan  6 19:39 CHANGELOG.md
-rw-r--r-- 1 node node 3416 Jan  6 19:39 MMM-Buttons.js
-rw-r--r-- 1 node node 5725 Jan  6 19:39 README.md
-rw-r--r-- 1 node node 2778 Jan  6 19:39 node_helper.js
-rw-r--r-- 1 node node  693 Jan  6 19:39 package.json
-rwxr-xr-x 1 node node  179 Jan  6 19:39 postinstall
node@raspberrypi:/opt/magic_mirror/modules/MMM-Buttons$ npm install

> Magic-Mirror-Module-Buttons@1.0.0 postinstall
> ./postinstall

/opt/magic_mirror/modules/MMM-Buttons
⠧ Building module: epoll, Completed: 0make: Entering directory '/opt/magic_mirror/modules/MMM-Buttons/node_modules/epoll/build'
  CXX(target) Release/obj.target/epoll/src/epoll.o
⠙ Building module: epoll, Completed: 0  SOLINK_MODULE(target) Release/obj.target/epoll.node
⠼ Building module: epoll, Completed: 0  COPY Release/epoll.node
make: Leaving directory '/opt/magic_mirror/modules/MMM-Buttons/node_modules/epoll/build'
✔ Rebuild Complete

added 6 packages, and audited 7 packages in 2m

found 0 vulnerabilities

[sdetweil]

@karsten13 yep, looks good…

[KristjanESPERANTO]

For me it looks like this:

kristjan@debian:~/Infomonitor/MagicMirror/modules$ git clone https://github.com/sdetweil/MMM-Buttons.git
Cloning into 'MMM-Buttons'...
remote: Enumerating objects: 56, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 56 (delta 0), reused 2 (delta 0), pack-reused 52
Receiving objects: 100% (56/56), 11.86 KiB | 1.69 MiB/s, done.
Resolving deltas: 100% (25/25), done.
kristjan@debian:~/Infomonitor/MagicMirror/modules$ cd MMM-Buttons/
kristjan@debian:~/Infomonitor/MagicMirror/modules/MMM-Buttons$ npm install
npm ERR! code 1
npm ERR! path /home/kristjan/Infomonitor/MagicMirror/modules/MMM-Buttons/node_modules/epoll
npm ERR! command failed
npm ERR! command sh -c -- node-gyp rebuild
npm ERR! make: Entering directory '/home/kristjan/Infomonitor/MagicMirror/modules/MMM-Buttons/node_modules/epoll/build'
npm ERR!   CXX(target) Release/obj.target/epoll/src/epoll.o
npm ERR!   SOLINK_MODULE(target) Release/obj.target/epoll.node
npm ERR! make: Leaving directory '/home/kristjan/Infomonitor/MagicMirror/modules/MMM-Buttons/node_modules/epoll/build'
npm ERR! gyp info it worked if it ends with ok
npm ERR! gyp info using node-gyp@9.3.1
npm ERR! gyp info using node@16.18.0 | linux | x64
npm ERR! gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
npm ERR! gyp info spawn /usr/bin/python3
npm ERR! gyp info spawn args [
npm ERR! gyp info spawn args   '/home/kristjan/Infomonitor/MagicMirror/node_modules/node-gyp/gyp/gyp_main.py',
npm ERR! gyp info spawn args   'binding.gyp',
npm ERR! gyp info spawn args   '-f',
npm ERR! gyp info spawn args   'make',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/home/kristjan/Infomonitor/MagicMirror/modules/MMM-Buttons/node_modules/epoll/build/config.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/home/kristjan/Infomonitor/MagicMirror/node_modules/node-gyp/addon.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/home/kristjan/.cache/node-gyp/16.18.0/include/node/common.gypi',
npm ERR! gyp info spawn args   '-Dlibrary=shared_library',
npm ERR! gyp info spawn args   '-Dvisibility=default',
npm ERR! gyp info spawn args   '-Dnode_root_dir=/home/kristjan/.cache/node-gyp/16.18.0',
npm ERR! gyp info spawn args   '-Dnode_gyp_dir=/home/kristjan/Infomonitor/MagicMirror/node_modules/node-gyp',
npm ERR! gyp info spawn args   '-Dnode_lib_file=/home/kristjan/.cache/node-gyp/16.18.0/<(target_arch)/node.lib',
npm ERR! gyp info spawn args   '-Dmodule_root_dir=/home/kristjan/Infomonitor/MagicMirror/modules/MMM-Buttons/node_modules/epoll',
npm ERR! gyp info spawn args   '-Dnode_engine=v8',
npm ERR! gyp info spawn args   '--depth=.',
npm ERR! gyp info spawn args   '--no-parallel',
npm ERR! gyp info spawn args   '--generator-output',
npm ERR! gyp info spawn args   'build',
npm ERR! gyp info spawn args   '-Goutput_dir=.'
npm ERR! gyp info spawn args ]
npm ERR! gyp info spawn make
npm ERR! gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
npm ERR! /usr/bin/ld: /lib/x86_64-linux-gnu/libm.so.6: unknown type [0x13] section `.relr.dyn'
npm ERR! /usr/bin/ld: skipping incompatible /lib/x86_64-linux-gnu/libm.so.6 when searching for /lib/x86_64-linux-gnu/libm.so.6
npm ERR! /usr/bin/ld: cannot find /lib/x86_64-linux-gnu/libm.so.6
npm ERR! /usr/bin/ld: /lib/x86_64-linux-gnu/libm.so.6: unknown type [0x13] section `.relr.dyn'
npm ERR! /usr/bin/ld: skipping incompatible /lib/x86_64-linux-gnu/libm.so.6 when searching for /lib/x86_64-linux-gnu/libm.so.6
npm ERR! /usr/bin/ld: /lib/x86_64-linux-gnu/libmvec.so.1: unknown type [0x13] section `.relr.dyn'
npm ERR! /usr/bin/ld: skipping incompatible /lib/x86_64-linux-gnu/libmvec.so.1 when searching for /lib/x86_64-linux-gnu/libmvec.so.1
npm ERR! /usr/bin/ld: cannot find /lib/x86_64-linux-gnu/libmvec.so.1
npm ERR! /usr/bin/ld: /lib/x86_64-linux-gnu/libmvec.so.1: unknown type [0x13] section `.relr.dyn'
npm ERR! /usr/bin/ld: skipping incompatible /lib/x86_64-linux-gnu/libmvec.so.1 when searching for /lib/x86_64-linux-gnu/libmvec.so.1
npm ERR! collect2: error: ld returned 1 exit status
npm ERR! make: *** [epoll.target.mk:145: Release/obj.target/epoll.node] Error 1
npm ERR! gyp ERR! build error 
npm ERR! gyp ERR! stack Error: `make` failed with exit code: 2
npm ERR! gyp ERR! stack     at ChildProcess.onExit (/home/kristjan/Infomonitor/MagicMirror/node_modules/node-gyp/lib/build.js:203:23)
npm ERR! gyp ERR! stack     at ChildProcess.emit (node:events:513:28)
npm ERR! gyp ERR! stack     at Process.ChildProcess._handle.onexit (node:internal/child_process:293:12)
npm ERR! gyp ERR! System Linux 5.10.0-20-amd64
npm ERR! gyp ERR! command "/home/kristjan/.nvm/versions/node/v16.18.0/bin/node" "/home/kristjan/Infomonitor/MagicMirror/node_modules/.bin/node-gyp" "rebuild"
npm ERR! gyp ERR! cwd /home/kristjan/Infomonitor/MagicMirror/modules/MMM-Buttons/node_modules/epoll
npm ERR! gyp ERR! node -v v16.18.0
npm ERR! gyp ERR! node-gyp -v v9.3.1
npm ERR! gyp ERR! not ok

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/kristjan/.npm/_logs/2023-01-06T18_47_25_457Z-debug-0.log
kristjan@debian:~/Infomonitor/MagicMirror/modules/MMM-Buttons$ uname -r
5.10.0-20-amd64
kristjan@debian:~/Infomonitor/MagicMirror/modules/MMM-Buttons$ lsb_release -a
No LSB modules are available.
Distributor ID:	Debian
Description:	Debian GNU/Linux 11 (bullseye)
Release:	11
Codename:	bullseye

[sdetweil]

@wishmaster270 i don’t see any issues for your module either (modified using postinstall script)

sam@galliumos:~/MagicMirror/modules/MMM-GPIO-Notifications$ npm install --omit=dev --no-fund --no-audit
npm WARN deprecated @npmcli/move-file@2.0.1: This functionality has been moved to @npmcli/fs

> MMM-GPIO-Notifications@0.0.5 postinstall
> ./postinstall

⠧ Building module: epoll, Completed: 0make: Entering directory '/home/sam/MagicMirror/modules/MMM-GPIO-Notifications/node_modules/epoll/build'
  CXX(target) Release/obj.target/epoll/src/epoll.o
⠴ Building module: epoll, Completed: 0  SOLINK_MODULE(target) Release/obj.target/epoll.node
⠧ Building module: epoll, Completed: 0  COPY Release/epoll.node
⠇ Building module: epoll, Completed: 0make: Leaving directory '/home/sam/MagicMirror/modules/MMM-GPIO-Notifications/node_modules/epoll/build'
✔ Rebuild Complete

added 170 packages in 20s

npm 8.11.0
node 16.16.0

[sdetweil]

@KristjanESPERANTO hm…

my laptop uname
Linux galliumos 4.16.18-galliumos #1 SMP PREEMPT Sun Jun 23 04:14:45 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

[sdetweil]

@KristjanESPERANTO but it didn’t execute the postinstall script…

tried to build without it… and it WILL fail without using electron-rebuild

what npm version is this?

[KristjanESPERANTO]

@sdetweil npm -v: 8.19.2