mmm-suncalc - Text only display of sunrise, sunset and other sun events

paviro

I see :D It still would be nice to see it in context with a clock for example :)

Snille

Hi!
Thank you for this module! :)
I can’t get it to change the “text”.
My config looks like this:

	{
		module: "mmm-suncalc",
		position: "top_left",
		classes: "default everyone small dimmed",
		latitude: 56.1171367,
		longitude: 12.9543434,
		text: "Soluppgång sunrise, Solnedgång sunset, Solen högst solarNoon, Gryning dusk, Skymmning dawn"
	},

But the actual screen looks like this:

What am I missing…?

PS: The example conf on your git repo has one m to too much in the module name and when you “clone” it it’s all in non capitals “mmm-suncalc” (most modules have MMM-Modname). :)

Obs: had to remove the " > " "< " for the conf to show correct here…

Thank you.

yawns

{
module: "mmm-suncalc",
position: "top_left",
classes: "default everyone small dimmed",
config: {
	latitude: 56.1171367,
	longitude: 12.9543434,
	text: "Soluppgång sunrise, Solnedgång sunset, Solen högst solarNoon, Gryning dusk, Skymmning dawn"
	},
},

Should work with these settings.

Snille

@yawns Working! :) Thank you!

jag

Thx for downloading and very useful feedback :).
Uploaded new version.
Added support for css classes.
Font size defaults to small.

retroflex

Just found this old module and added it to my mirror. With some unicode and html the result is pretty nice, so I thought I’d share it:

0_1542831254681_5c57c520-df2b-48dd-b9b6-266a9d867d37-image.png

Ok, in Swedish, but it basically says “The sun… rises: / sets:”. I used dawn-sunrise and sunset-dusk for the time intervals. This gives approximately the time from when it’s almost dark to full day and vice versa.

Config:

		{
			module: 'mmm-suncalc',
			position: 'top_left',
			header: 'Solen',
			config: {
				latitude: xx.xxxx,
				longitude: xx.xxxx,
				text: '<table>' +
								'<tr><td>& #9728;</td><td>Går upp:</td><td style="text-align: right">[dawn] - [sunrise]</td></tr>' +
								'<tr><td>& #9790;</td><td>Går ner:</td><td style="text-align: right">[sunset] - [dusk]</td></tr>' +
							 '</table>'
			}
		},

Note that you need to remove the space between & and # in the config above. It was impossible to write the code in the forum otherwise. Also you need to change [ … ] to < … > for dawn, sunset etc.

dankerthrone

Hey, total newbie to everything coding- and mirror-related here. I tried to get suncalc to work while also trying @retroflex 's suggested layout, but whatever I do, nothing ever show’s up on my MM screen. The module just doesn’t do anything. Do I need to also clone the original suncalc repository? Where to, if so?

So far, what I got is this:

{
			module: 'mmm-suncalc',
			position: "lower_third",
			//classes: "default everyone small dimmed",
			header: "Sonne",
			config: {
				latitude: 51.03586,
				longitude: 7.06379,
				text: "Aufgang: <dawn> - <sunrise>. Untergang: <sunset> - <dusk>"
				//'<table>' + 
				//'<tr><td>&#9728;</td><td>Går upp:</td><td><dawn> - <sunrise></td></tr>' +
				//'<tr><td>&#9790;</td><td>Går ner:</td><td><sunset> - <dusk></td></tr>' +
				//'</table>'
				},
		},

Does that look alright?

sdetweil

@dankerthrone the module is on github

https://github.com/janbanan007/mmm-suncalc

the readme shows a simple start

dankerthrone

Thanks. I think in general people know to cd to the module folder to be installed and then run

npm install

but I didn’t get that from the readme, thus ran the install command from the ~/MagicMirror folder and as a result never installed anything. No wonder the thing doesn’t run :D

It does now, though, so thanks again!

Lordy

Hello,

can sunrise and sunset be colored, if so, can you please tell me the line (command) for css?