Magic Mirror doesn't work after a boot

[sdetweil]

@eightbit no… if it all works then later yes

[sdetweil]

@eightbit its only called ‘fix’ cause during my install script you can add pm2 support, or not… so its a separate script if u change your mind later

[eightbit]

@sdetweil Shoot. No luck! When I ran your script it loaded up and started perfectly and after the reboot it is hung on a white screen. In the logs it looks like it’s really trying to do something with the chromium browser but it just hangs and hangs. When it works on a pm2 start mm.sh (or using fixuppm2.sh) the log looks the same but then there are a couple lines after “starting chromium browser now”. I’ll post the log in another post.

[sdetweil]

@eightbit I just forgot, did you remove the autostart setup u added in the services?

[eightbit]

/home/secretsanta/.pm2/logs/MagicMirror-error.log last 15 lines:
/home/secretsanta/.pm2/logs/MagicMirror-out.log last 15 lines:
0|MagicMir | [14.12.2023 07:44.23.049] [LOG] No helper found for module: alert.
0|MagicMir | [14.12.2023 07:44.23.234] [LOG] Initializing new module helper ...
0|MagicMir | [14.12.2023 07:44.23.248] [LOG] Module helper loaded: updatenotification
0|MagicMir | [14.12.2023 07:44.46.958] [LOG] Initializing new module helper ...
0|MagicMir | [14.12.2023 07:44.46.963] [LOG] Module helper loaded: MMM-GooglePhotos
0|MagicMir | [14.12.2023 07:44.46.988] [LOG] All module helpers loaded.
0|MagicMir | [14.12.2023 07:44.47.103] [LOG] Starting server on port 8080 ...
0|MagicMir | [14.12.2023 07:44.47.496] [LOG] Server started ...
0|MagicMir | [14.12.2023 07:44.47.499] [LOG] Connecting socket for: updatenotification
0|MagicMir | [14.12.2023 07:44.47.503] [LOG] Starting module helper: updatenotification
0|MagicMir | [14.12.2023 07:44.47.525] [LOG] Connecting socket for: MMM-GooglePhotos
0|MagicMir | [14.12.2023 07:44.47.527] [LOG] Sockets connected & modules started ...
0|MagicMir | [14.12.2023 07:44.47.529] [LOG]
0|MagicMir | Ready to go! Please point your browser to: http://localhost:8080
0|MagicMir | Starting chromium browser now, have patience, it takes a minute

[eightbit]

@sdetweil Yea I cleared out the systemd services I tried to enabled. They are disabled and stopped. I also tried an rc.local startup file to run the .sh file which never worked. I know that’s depreciated but desperate times and desperate measures lol.

[sdetweil]

@eightbit what device is this… you are using my install script which launches

run-start.sh

this is reserved for armv6 devices…
can u check the autostart

did you do this??? (answer should be no)
https://docs.magicmirror.builders/configuration/autostart.html#using-systemd-systemctl

[sdetweil]

@eightbit also do a

free -m

see how big the swap space is and total memory

[eightbit]

@sdetweil Raspberry Pi 3 Model B Rev 1.2

I did try to use systemd but it did not work so I disabled and deleted all the systemd attempts.

[eightbit]

@sdetweil

secretsanta@raspberrypi:~ $ free -m
               total        used        free      shared  buff/cache   available
Mem:             921         265          94           6         561         594
Swap:           1861           1        1860