Electron failed to install properly

cianoo45

Used the auto-installer to install MM2, When i type DISPLAY=:0 npm start i get this error. ```

magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js

/home/pi/MagicMirror/node_modules/electron/index.js:9
throw new Error('Electron failed to install correctly, please delete node_modu                                                                                        les/' + path.basename(__dirname) + ' and try installing again')
^

Error: Electron failed to install correctly, please delete node_modules/electron                                                                                         and try installing again
  at Object. (/home/pi/MagicMirror/node_modules/electron/index.js:9                                                                                        :9)
  at Module._compile (module.js:570:32)
  at Object.Module._extensions..js (module.js:579:10)
  at Module.load (module.js:487:32)
  at tryModuleLoad (module.js:446:12)
  at Function.Module._load (module.js:438:3)
  at Module.require (module.js:497:17)
  at require (internal/module.js:20:19)
  at Object. (/home/pi/MagicMirror/node_modules/electron/cli.js:3:1                                                                                        6)
  at Module._compile (module.js:570:32)

npm ERR! Linux 4.4.43-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "start"
npm ERR! node v6.9.4
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! magicmirror@2.1.0 start: `electron js/electron.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.1.0 start script 'electron js/electron.js'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the magicmirror package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron js/electron.js
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs magicmirror
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls magicmirror
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/npm-debug.log

Looked around for a fix but could not find one, Electron quick start gave the same error, any ideas?

cowboysdude

Are you starting your mirror over ssh?

That would be the only reason to use DISPLAY=:0 npm start

cianoo45

Yeah I am

MichMich

Which version of Raspbian are you using?

cianoo45

The latest one, Jesse, only downloaded it a couple days ago

MichMich

Jessie or Jessie Lite?

cianoo45

Full version of Jessie, not Jessie light

cianoo45

When i type “node --version” it says i have V4.0.0 installed which is very outdated, could this be why?

cianoo45

@cianoo45 said in Electron failed to install properly:

When i type “node --version” it says i have V4.0.0 installed which is very outdated, could this be why?

Nevermind, updated to V7.4 and i still get the same error when running

dpenney

Getting the exact same thing here too - Raspberry Pi3 - any ideas?

16 error Linux 4.4.34-v7+
17 error argv “/usr/local/bin/node” “/usr/local/bin/npm” “start”
18 error node v6.9.4
19 error npm v3.10.10
20 error file sh
21 error code ELIFECYCLE
22 error errno ENOENT
23 error syscall spawn
24 error magicmirror@2.1.0 start: electron js/electron.js
24 error spawn ENOENT
25 error Failed at the magicmirror@2.1.0 start script ‘electron js/electron.js’.

I had tried using the latest node too - I downgraded to v6.9.4 just on the off chance it was a versioning thing but as you can see no go.