Read the statement by Michael Teeuw here.
birthdaylist - discontinued ?
-
-
@rkorell ok, just wanted to make sure nothing else was going on. github will only allow a user to pin 6 repos on their home page. i have at least 20 things i would pin
i also don’t see anything in your list that would be sending hide requests
i am driving all day today, so i may try to find a debug strategy
my idea is to install MMM-logging, which takes the messages from the browser side and adds them to the messages from the server/node helper side
and then i will give a debug message about which source called hide
but im not sure that will tell us
-
Dear Sam @sdetweil ,
no hurry.
It is definitely not urgent!Have a safe trip!
I’ve added MMM-logging but cannot see a difference …Warmest regards,
Ralf -
@rkorell have not added messages yet
-
@sdetweil
:-) yes for sure.
But I had assumed that the already given output (from other modules as well) will change … -
@rkorell i added some debug for suspending, resuming, and getdom() if suspended
git pull to update
add debug:true
to the config optionsyou will see the output from mmm-logging
who calls before we suspend ?
-
@sdetweil said i added some debug for suspending, resuming, and getdom() if suspended
git pull to update
add debug:true
to the config optionsyou will see the output from mmm-logging
who calls before we suspend ?
Dear Sam,
thanks a lot.pi@smarthome:~/MagicMirror/modules/birthdaylist $ git pull hint: Pulling without specifying how to reconcile divergent branches is hint: discouraged. You can squelch this message by running one of the following hint: commands sometime before your next pull: hint: hint: git config pull.rebase false # merge (the default strategy) hint: git config pull.rebase true # rebase hint: git config pull.ff only # fast-forward only hint: hint: You can replace "git config" with "git config --global" to set a default hint: preference for all repositories. You can also pass --rebase, --no-rebase, hint: or --ff-only on the command line to override the configured default per hint: invocation. remote: Enumerating objects: 5, done. remote: Counting objects: 100% (5/5), done. remote: Compressing objects: 100% (1/1), done. remote: Total 3 (delta 2), reused 3 (delta 2), pack-reused 0 (from 0) Unpacking objects: 100% (3/3), 419 bytes | 32.00 KiB/s, done. From https://github.com/sdetweil/birthdaylist 0fcfb8c..0c16aeb master -> origin/master Updating 0fcfb8c..0c16aeb Fast-forward birthdaylist.js | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)git pull has worked, debug is enabled.
Surprisingly enough today in the morning birthdaylist is NOT disappeared.
This exactly is the kind of error I like most: Unpredictable and not reproducable :-(Thanks anyway for your really great support (I’m pretty sure you do have more than enough other things to do …)
Checking the console output the “debug” switch works - a lot more of information is showing up.
Several module notifications are received from your module and broadcasted in log.
One single “conspicuousness”: undefined is in init! in line 48 of birthdaylist.js :(Log.log(this.name + " is in init!");)The “suspended” status (and therefore “hidden” (??) ) is reached several times - I guess caused by MMM-Pir ? - at least it corresponds definitely with turning off the screen by MMM-Pir.
Warmest regards,
Ralf -
The suspending call seems indeed to come from MMM-Pir.
But there is always a resuming…birthdaylist received a module notification: MMM_PIR-SCREEN_POWERSTATUS from sender: MMM-Pir birthdaylist.js:337 birthdaylist suspending birthdaylist.js:108 birthdaylist received a module notification: CURRENTWEATHER_TYPE from sender: weather birthdaylist.js:108 birthdaylist received a module notification: WEATHER_UPDATED from sender: weather birthdaylist.js:108 birthdaylist received a module notification: WEATHER_UPDATED from sender: weather birthdaylist.js:108 birthdaylist received a module notification: CURRENTWEATHER_TYPE from sender: weather birthdaylist.js:108 birthdaylist received a module notification: WEATHER_UPDATED from sender: weather birthdaylist.js:108 birthdaylist received a module notification: WEATHER_UPDATED from sender: weather birthdaylist.js:108 birthdaylist received a module notification: CALL_DISCONNECTED from sender: MMM-FRITZ-Box-Callmonitor-py3 birthdaylist.js:108 birthdaylist received a module notification: MMM_PIR-SCREEN_POWERSTATUS from sender: MMM-Pir birthdaylist.js:345 birthdaylist resuming birthdaylist.js:108 birthdaylist received a module notification: CURRENTWEATHER_TYPE from sender: weather birthdaylist.js:108 birthdaylist received a module notification: WEATHER_UPDATED from sender: weather birthdaylist.js:108 birthdaylist received a module notification: WEATHER_UPDATED from sender: weather birthdaylist.js:337 birthdaylist suspending 2birthdaylist.js:108 birthdaylist received a module notification: MMM_PIR-SCREEN_POWERSTATUS from sender: MMM-Pir birthdaylist.js:345 birthdaylist resumingI assume that we have to wait until birthdaylist disappears and then check the written logs afterwards if there is something different (I guess: NOT :-(. )
Regards,
Ralf -
@rkorell right we have to wait, thanks for the great info
ill look at the init time message
-
@rkorell notifications are broadcast. so every module gets every broadcast.
thats why you have to check if the broadcast is for you , but logging them all can give an idea what is going on.
if clock seconds was enabled you would see a notification for that too
-
@sdetweil clock seconds are enabled, as far as I know …
at least I haven’t found a parameter to enable/disable seconds
and second hand is shown … -
@rkorell you are using the analog clock, not digital
this for digital
displaySeconds Display seconds. Possible values: true or false Default value: trueand I didn’t see this change
sendNotifications Enable notifications for elapsed time. Used to be always done send prio to v2.23 Possible values: true, or false Default value: false -
@sdetweil Yeah…
You’re right.
I’ve set this - my type of clock is set to “both” because I like sunset and day of week information.This causes an error in your module…
birthdaylist.js:398 Uncaught (in promise) TypeError: Cannot read properties of undefined (reading 'startsWith') at Class.getBD_DAY_from_Date (birthdaylist.js:398:9) at Class.getDom (birthdaylist.js:462:154) at main.js:132:35 at new Promise (<anonymous>) at updateDom (main.js:112:10) at Object.updateDom (main.js:669:4) at Class.updateDom (module.js:341:6) at Class.socketNotificationReceived (birthdaylist.js:328:9) at module.js:240:9 at Socket.<anonymous> (socketclient.js:32:4)Not sure if this corresponds with the displaySeconds parameter but seen this error first time…
Regards,
Ralf -
No, obviously NOT…
I’ve now added “sendNotifications: true” to config.
Mirror reloads and your module starts without this error message. -
@rkorell can i see your birthdaylist config
and the date portion of one birthday from the list, which order the date info is in
and this error is trying to check if tye month part starts w a 0
and i figure out which date separator you used
/, or :, or just not ,
and then i split the date with the separator i discovered, they all HAVE to be the same separator and order -
@sdetweil yes, for sure
birth, name 17/01/1965,Carola 31/12/1963, Ralf 27/01/1993, Lennart 11/07/1987, Levin 28/07/1985, Katharina 4/1/1953,Norbert L. 18/3/1939,Jürgen 22/3/1996,Chrizzy 27/3/1985,Hochzeitstag 31/3/2012,Hannah 31/3/2022,Nilo 11/4/1974,Claas 26/4/1965,Ralf B. 30/4/1989,Rahel 7/5/2020,Mathilda 27/5/1994,Elaine 10/6/1960,Melanie 5/2/1965,Stefan 26/5/2002,Leonie 4/1/2004,Carolin 10/6/95, 2.Hochzeitstag 10/6/1964,Petra B 23/6/1984,Colin 29/7/1995,Jassi 29/7/1955,Shirley P. 20/7/2001,Helene 5/8/1963,Harald 16/9/1997,Shirley Pi. 20/9/1965,Heiko D. 15/8/1967,Uta 23/8/2019,Emil 17/11/68,Susanne 27/9/1987,Severin 9/11/1948,Marianne 12/11/1967,Silvia 27/11/1956,Martina L. -
Ahh…
in the code listing it shows up a difference …
“10/6/95, 2. Hochzeitstag”
with an additional space and a dot…
is this a problem?
I can change the taxt and delete space if nacessary (althoug I mean I’ve read that you are truncing entries …
But the dot could be eliminated if useful.Ralf
-
interesting enough the error shows up first time as I reported - the list is always the same - literally unchanged until first day of installation…
-
@rkorell nvm i see it… let me look at it
-
@rkorell I don’t see the error… can you show me the bdlist config
also, that line of code would only happen is there WAS a birthday to display
and your list doesn’t have one for tomorrow or later (in this month)
are for next month…still don’t see the error…
my code strips off the extra leading space on the name field.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login