Read the statement by Michael Teeuw here.
MMM-DHT22
-
@lif It’s requiring tools no longer available, so dead module. Use something else.
https://github.com/Tom-Hirschberger/MMM-Temperature is what I used when I had a module hooked up to it.
-
@lif It’s requiring tools no longer available, so dead module. Use something else.
https://github.com/Tom-Hirschberger/MMM-Temperature is what I used when I had a module hooked up to it.
Thanks, I’ve given it a try but get an error in the last stage of the installation
~/MagicMirror/modules/MMM-Temperature/scripts $ ./venvWrapper.py --venv-name py-venv --run ./dht22 Traceback (most recent call last): File "/home/pi/MagicMirror/modules/MMM-Temperature/scripts/./dht22", line 6, in <module> import board File "/home/pi/MagicMirror/modules/MMM-Temperature/scripts/py-venv/lib/python3.11/site-packages/board.py", line 51, in <module> from adafruit_blinka.board.raspberrypi.raspi_40pin import * File "/home/pi/MagicMirror/modules/MMM-Temperature/scripts/py-venv/lib/python3.11/site-packages/adafruit_blinka/board/raspberrypi/raspi_40pin.py", line 6, in <module> from adafruit_blinka.microcontroller.bcm283x import pin File "/home/pi/MagicMirror/modules/MMM-Temperature/scripts/py-venv/lib/python3.11/site-packages/adafruit_blinka/microcontroller/bcm283x/pin.py", line 7, in <module> from adafruit_blinka.microcontroller.generic_linux.rpi_gpio_pin import Pin File "/home/pi/MagicMirror/modules/MMM-Temperature/scripts/py-venv/lib/python3.11/site-packages/adafruit_blinka/microcontroller/generic_linux/rpi_gpio_pin.py", line 6, in <module> from RPi import GPIO ModuleNotFoundError: No module named 'RPi' -
@lif I’m not sure on that, @wishmaster270 (Tom) would know more.
-
Thanks, not the end of the world if I can’t use it.
-
@lif Hi. Great you want to try one of my modules.
Can you try installing a additional python system package with
sudo apt install python3-rpi-lgpioI tried the scripts on my newly installed system with Bookworm and everything worked as expected.
Maybe the missing package had been installed with something else I installed on my system. -
@wishmaster270 said in MMM-DHT22:
@lif Hi. Great you want to try one of my modules.
Can you try installing a additional python system package with
sudo apt install python3-rpi-lgpioI tried the scripts on my newly installed system with Bookworm and everything worked as expected.
Maybe the missing package had been installed with something else I installed on my system.Thanks, that was already installed
sudo apt install python3-rpi-lgpio Reading package lists... Done Building dependency tree... Done Reading state information... Done python3-rpi-lgpio is already the newest version (0.6-0~rpt1). 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.This is on Bookworm
-
@lif
That’s strange…Can you try to start with a new, fresh virtual python environment and install the needed libs again?Remove old virtual environment:
rm -rf /home/pi/MagicMirror/modules/MMM-Temperature/scripts/py-venvInstall the needed system libs:
sudo apt -y update && sudo apt -y install python3-venv libgpiod2Re-Create the virtual environment:
cd ~/MagicMirror/modules/MMM-Temperature/scripts ./venvWrapper.py --verbose --venv-name py-venv --createRe-Install the libs:
cd ~/MagicMirror/modules/MMM-Temperature/scripts ./venvWrapper.py --venv-name py-venv --install-libs adafruit-circuitpython-dhtRun the test again:
cd ~/MagicMirror/modules/MMM-Temperature/scripts ./venvWrapper.py --venv-name py-venv --run ./dht22If it fails again. Can you please provide the output of
cd ~/MagicMirror/modules/MMM-Temperature/scripts source py-venv/bin/activate pip freeze deactivateThe output should look something like:
Adafruit-Blinka==8.66.1 Adafruit-Blinka-Raspberry-Pi5-Neopixel==1.0.0rc2 adafruit-circuitpython-busdevice==5.2.13 adafruit-circuitpython-connectionmanager==3.1.5 adafruit-circuitpython-dht==4.0.9 adafruit-circuitpython-requests==4.1.13 adafruit-circuitpython-typing==1.12.2 Adafruit-PlatformDetect==3.83.2 Adafruit-PureIO==1.1.11 binho-host-adapter==0.1.6 lgpio==0.2.2.0 pyftdi==0.57.1 pyserial==3.5 pyusb==1.3.1 rpi-ws281x==5.0.0 RPi.GPIO==0.7.1 sysv-ipc==1.1.0 typing_extensions==4.15.0 -
@wishmaster270 AND you must enable the virtual env in the script if pm2 starts MagicMirror
-
@sdetweil Hi sam. My wrapper script will use the python binary in the virtual environment folder. This way the environment will be activated automatically.
-
@wishmaster270 cool, you have the venv in the module folder
-
@wishmaster270 said in MMM-DHT22:
source py-venv/bin/activate
Same failure on install.
from RPi import GPIO ModuleNotFoundError: No module named 'RPi' ```, The output of pip freeze is ``` MagicMirror/modules/MMM-Temperature/scripts $ source py-venv/bin/activate (py-venv) pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $ pip freeze Adafruit-Blinka==8.66.2 adafruit-circuitpython-busdevice==5.2.13 adafruit-circuitpython-connectionmanager==3.1.5 adafruit-circuitpython-dht==4.0.9 adafruit-circuitpython-requests==4.1.13 adafruit-circuitpython-typing==1.12.2 Adafruit-PlatformDetect==3.84.0 Adafruit-PureIO==1.1.11 binho-host-adapter==0.1.6 pyftdi==0.57.1 pyserial==3.5 pyusb==1.3.1 sysv-ipc==1.1.0 typing_extensions==4.15.0 (py-venv) pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $ deactivate pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $The only difference from yours is mine is missing the second line.
Hope this helps
-
Hi,
I’ve gone through your procedure again and this time it works.
The only difference is that I run a python3 script to control screen blanking using a PIR before starting Magic Mirror, this time I didn’t start that script.
With the PIR script and MagicMirror running I get:
pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $ ./venvWrapper.py --venv-name py-venv --run ./dht22 {"temperature_c": 23.5, "humidity": 53.7, "temperature_f": 74.30000000000001, "error": false} pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $ ./venvWrapper.py --venv-name py-venv --run ./dht22 {"temperature_c": 23.5, "humidity": 53.7, "temperature_f": 74.30000000000001, "error": false} pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $ ./venvWrapper.py --venv-name py-venv --run ./dht22 {"temperature_c": 0.0, "humidity": 0.0, "temperature_f": 32.0, "error": true} pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $ ./venvWrapper.py --venv-name py-venv --run ./dht22 {"temperature_c": 23.6, "humidity": 53.5, "temperature_f": 74.48, "error": false} pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $ ./venvWrapper.py --venv-name py-venv --run ./dht22 {"temperature_c": 0.0, "humidity": 0.0, "temperature_f": 32.0, "error": true} pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $ ./venvWrapper.py --venv-name py-venv --run ./dht22 {"temperature_c": 23.7, "humidity": 53.3, "temperature_f": 74.66, "error": false} pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $ ./venvWrapper.py --venv-name py-venv --run ./dht22 {"temperature_c": 23.8, "humidity": 53.2, "temperature_f": 74.84, "error": false} pi@mm:~/MagicMirror/modules/MMM-Temperature/scripts $I can live with that.
Thanks for all your help
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login