MMM-ResRobot - Public transport information for Sweden

[selarp]

Thanks @Alvinger for an awesome module! However, I have a problem when I add more than one destination (to:). Displays only the result of the destination that appears first.

Here is my config.js:

{
    module: "MMM-ResRobot",
    position: "left",
    header: "Departures from Skanör C",
    config: {
        from: "740000950",   // ResRobot Station ID (or a comma-separated string of IDs)
        to: "740000003,740001586", // ResRobot Station ID of destination (or a comma-separated string of IDs)
        maximumEntries: 6,  // Number of departures to show on screen
        truncateAfter: 5,   // A value > 0 will truncate direction name at first space after  characters. 0 = no truncation
        apiKey: ”[My API-key]"  // Your ResRobot apiKey
    }
},

[Alvinger]

Hi,
you need to specify a station id in “from” as well. “from” is used to find the station’s departures, “to” is used to differentiate between destinations going from the “from” station.

Change “from” to ‘from: “740000950,740000950”’ to make it work as you want.

[selarp]

Of course! Thank you very much @Alvinger!

[Klzow]

Hi!
I have a question /idea /request.

Would it be possible to set a limit in minutes in which the module won’t show departures before that limit?

For example I have a 15 min walk to bus/subway and during rush hour in Stockholm lots of departures are happening every minute. To be able to plan ahead and see when the bus is leaving I need to show many departures on the mirror to see that far ahead in time. Would it be possible to set a limit to not show departures happening earlier then 15 min ahead since it would not be necessary to know that the subway is leaving in 1 min when I can’t get her there in time to catch it? This would clean up the mirror and save some space on the screen.

[Alvinger]

@Klzow,
That shouldn’t be too hard to do. I will look into it. My current thinking is to introduce a new config value (something like “ignoreBefore=5” with default 0 for backward compatibility) Keep an eye on this thread for developments!

[Alvinger]

@Klzow,
I’ve uploaded a new version of the module. It has a new config option, skipMinutes, which allows you to skip departures occuring within skipMinutes from now. Feel free to try it out.

[FallandeGubbe]

Hej!

Excellent module. Would it be possible to get it to work on Raspberry Pi 1 ? I get it fully working with my Raspberry pi 3 , but when I try with my 1 I get “connection refused” when starting midori…

… and when accessing the mirror via Chrome on my PC I see all modules loaded and working…

[Alvinger]

@FallandeGubbe,
I’m running it on a Raspberry Pi 1 B with 256MB so yes, it’s possible… :-)

You can’t run MagicMirror out of the box but I wrote a post in another thread about it:
[https://forum.magicmirror.builders/topic/1659/3-tries-3-fails-raspberry-b/13]

[FallandeGubbe]

@Alvinger Thanks for replying! Yes, I know that Raspberry Pi 1 needs some manual work :)

I followed the tutorial at https://forum.magicmirror.builders/topic/1183/how-i-got-my-magic-mirror-working-on-a-raspberry-pi-0-zero

and everything is working great! Until I try to install MMM-ResRobot. Something gets messed up apparently… But it works fine on my Raspberry Pi 3 … (same SD card, same image)

OK, I’ll keep investigating then, since you got it working!!

[Alvinger]

@FallandeGubbe
Maybe a stupid quesrion but did you run npm install after cloning the repository?