Read the statement by Michael Teeuw here.
[MMM-PIR-Sensor] Install failing
-
@PindaPower said in [MMM-PIR-Sensor] Install failing:
In other post they posted this link, maybe it will help??
https://diyhacking.com/raspberry-pi-gpio-control/Thank you. With that i understood the delay and sensitivy knob.
But! When i put sensivity at most right, the monitor goes on automatically ON after a while, even when there is NO movement in the radius… How can i debug this? -
I’ve tried following the instruction above of removing and reinstalling but I keep getting the below errors. I’m not even sure what they are unfortunately, wondering if anyone is able to help.
pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install npm WARN engine electron-rebuild@1.5.7: wanted: {"node":">=6.0.0"} (current: {"node":"4.2.1","npm":"2.14.7"}) > epoll@0.1.20 install /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/node_modules/epoll > node-gyp rebuild make: Entering directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/node_modules/epoll/build' CXX(target) Release/obj.target/epoll/src/epoll.o SOLINK_MODULE(target) Release/obj.target/epoll.node COPY Release/epoll.node make: Leaving directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/node_modules/epoll/build' - > Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor > electron-rebuild -e ../../node_modules/electron-prebuilt /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/node_modules/spawn-rx/lib/index.js:139 let cmdArgs = ['/C', exe, ...args]; ^^^ SyntaxError: Unexpected token ... at exports.runInThisContext (vm.js:53:16) at Module._compile (module.js:414:25) at Object.Module._extensions..js (module.js:442:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:311:12) at Module.require (module.js:366:17) at require (module.js:385:17) at Object. (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/rebuild.js:38:16) at Module._compile (module.js:435:26) at Object.Module._extensions..js (module.js:442:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:311:12) at Module.require (module.js:366:17) at require (module.js:385:17) at Object. (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:24:16) at Module._compile (module.js:435:26) npm ERR! Linux 4.4.38+ npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" npm ERR! node v4.2.1 npm ERR! npm v2.14.7 npm ERR! code ELIFECYCLE npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron-prebuilt` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron-prebuilt'. npm ERR! This is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! electron-rebuild -e ../../node_modules/electron-prebuilt npm ERR! You can get their info via: npm ERR! npm owner ls Magic-Mirror-Module-PIR-Sensor npm ERR! There is likely additional logging output above. npm ERR! Please include the following file with any support request: npm ERR! /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.logedit: I have tried modifying the package.json file in the FAQ but the install exits within a minute, vs a really long time leaving the original. Seems like it gets farther through the install the first time. Though I’ve noticed i do have the electron folder and not an electron-prebuilt. The following is the error I get when i remove the -prebuilt.
pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install | > Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor > electron-rebuild -e ../../node_modules/electron /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/node_modules/spawn-rx/lib/index.js:139 let cmdArgs = ['/C', exe, ...args]; ^^^ SyntaxError: Unexpected token ... at exports.runInThisContext (vm.js:53:16) at Module._compile (module.js:414:25) at Object.Module._extensions..js (module.js:442:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:311:12) at Module.require (module.js:366:17) at require (module.js:385:17) at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/rebuild.js:38:16) at Module._compile (module.js:435:26) at Object.Module._extensions..js (module.js:442:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:311:12) at Module.require (module.js:366:17) at require (module.js:385:17) at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:24:16) at Module._compile (module.js:435:26) npm ERR! Linux 4.4.38+ npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" npm ERR! node v4.2.1 npm ERR! npm v2.14.7 npm ERR! code ELIFECYCLE npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron'. npm ERR! This is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! electron-rebuild -e ../../node_modules/electron npm ERR! You can get their info via: npm ERR! npm owner ls Magic-Mirror-Module-PIR-Sensor npm ERR! There is likely additional logging output above. npm ERR! Please include the following file with any support request: npm ERR! /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.logAfter doing the npm rebuild suggested above I get this error (with original/modified package.json)
pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install - > Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor > electron-rebuild -e ../../node_modules/electron-prebuilt /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/node_modules/spawn-rx/lib/index.js:139 let cmdArgs = ['/C', exe, ...args]; ^^^ SyntaxError: Unexpected token ... at exports.runInThisContext (vm.js:53:16) at Module._compile (module.js:414:25) at Object.Module._extensions..js (module.js:442:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:311:12) at Module.require (module.js:366:17) at require (module.js:385:17) at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/rebuild.js:38:16) at Module._compile (module.js:435:26) at Object.Module._extensions..js (module.js:442:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:311:12) at Module.require (module.js:366:17) at require (module.js:385:17) at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:24:16) at Module._compile (module.js:435:26) npm ERR! Linux 4.4.38+ npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" npm ERR! node v4.2.1 npm ERR! npm v2.14.7 npm ERR! code ELIFECYCLE npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron-prebuilt` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron-prebuilt'. npm ERR! This is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! electron-rebuild -e ../../node_modules/electron-prebuilt npm ERR! You can get their info via: npm ERR! npm owner ls Magic-Mirror-Module-PIR-Sensor npm ERR! There is likely additional logging output above. npm ERR! Please include the following file with any support request: npm ERR! /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log -
@Mar said in [MMM-PIR-Sensor] Install failing:
I’ve tried following the instruction above of removing and reinstalling but I keep getting the below errors. I’m not even sure what they are unfortunately, wondering if anyone is able to help.
pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install npm WARN engine electron-rebuild@1.5.7: wanted: {"node":">=6.0.0"} (current: {"node":"4.2.1","npm":"2.14.7"})This is an old node version. Please update your
nodeandnpm. (If you need help check the answers to this SO question.) -
@Jopyth thank you very much for all your efforts for this community.
Even its in your spare time it should be honored ! -
@Jopyth Hi, thanks for taking the time to respond to this. Sorry I was away for work and didnt have too much time to test this out.
So i managed to, using your link, to update node. But there was issues even getting there, I had to use an older version of node to update npm…but anyways here is the output showing I’ve updated to the latest version.
pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm -v 4.0.5 pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ node -v v7.4.0But now I’m getting this issue. Again thanks @Jopyth for responding so quickly last time.
pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install npm WARN prefer global node-gyp@3.5.0 should be installed with -g > epoll@0.1.20 install /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll > node-gyp rebuild make: Entering directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build' CXX(target) Release/obj.target/epoll/src/epoll.o SOLINK_MODULE(target) Release/obj.target/epoll.node COPY Release/epoll.node make: Leaving directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build' > Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor > electron-rebuild -e ../../node_modules/electron-prebuilt An unhandled error occurred inside electron-rebuild Unable to find electron-prebuilt's version number, either install it or specify an explicit version Error: Unable to find electron-prebuilt's version number, either install it or specify an explicit version at _callee$ (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:74:17) at tryCatch (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:63:40) at Generator.invoke [as _invoke] (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:337:22) at Generator.prototype.(anonymous function) [as next] (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:96:21) at Generator.tryCatcher (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bluebird/js/release/util.js:16:23) at PromiseSpawn._promiseFulfilled (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bluebird/js/release/generators.js:97:49) at /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bluebird/js/release/generators.js:201:15 at Object. (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:197:4) at Module._compile (module.js:571:32) at Object.Module._extensions..js (module.js:580:10) at Module.load (module.js:488:32) at tryModuleLoad (module.js:447:12) at Function.Module._load (module.js:439:3) at Module.runMain (module.js:605:10) at run (bootstrap_node.js:420:7) at startup (bootstrap_node.js:139:9) npm ERR! Linux 4.4.38+ npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" npm ERR! node v7.4.0 npm ERR! npm v4.0.5 npm ERR! code ELIFECYCLE npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron-prebuilt` npm ERR! Exit status 255 npm ERR! npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron-prebuilt'. npm ERR! Make sure you have the latest version of node.js and npm installed. npm ERR! If you do, this is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! electron-rebuild -e ../../node_modules/electron-prebuilt npm ERR! You can get information on how to open an issue for this project with: npm ERR! npm bugs Magic-Mirror-Module-PIR-Sensor npm ERR! Or if that isn't available, you can get their info via: npm ERR! npm owner ls Magic-Mirror-Module-PIR-Sensor npm ERR! There is likely additional logging output above. npm ERR! Please include the following file with any support request: npm ERR! /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log -
-
@Jopyth It finally worked!!! :lifter_tone2: thanks so much. Ive spent days on this :(
Tried this last link you provided previously before posting but nothing was working, your support around getting node updated (and npm) was all that needed to happen first.
Thanks again!
-
@Jopyth Though looks like its failing on the config file now, Do you see any issues with the following?
{ module: 'MMM-PIR-Sensor', config: { sensorPin: 17, } },i seem to get an error and MM doesnt load when this is in the config file. I can even have disabled:true and it loads, otherwise I’ll get a blank webpage.
-
using PM2 Im able to get the logs when starting, and even though it installed with your instructions i now get this error in the logs.
0|mm | Error: The module '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build/Release/epoll.node' 0|mm | was compiled against a different Node.js version using 0|mm | NODE_MODULE_VERSION 50. This version of Node.js requires 0|mm | NODE_MODULE_VERSION 51. Please try re-compiling or re-installing 0|mm | the module (for instance, using `npm rebuild` or`npm install`). 0|mm | at Object.Module._extensions..node (module.js:598:18) 0|mm | at Module.load (module.js:488:32) 0|mm | at tryModuleLoad (module.js:447:12) 0|mm | at Function.Module._load (module.js:439:3) 0|mm | at Module.require (module.js:498:17) 0|mm | at require (internal/module.js:20:19) 0|mm | at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:76:44) 0|mm | at Object. (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/epoll.js:1:99) 0|mm | at Module._compile (module.js:571:32) 0|mm | at Object.Module._extensions..js (module.js:580:10) 0|mm | unclutter: someone created a sub-window to my sub-window! giving up -
@Mar for anyone else who is getting this an npm rebuild fixes it. from here https://github.com/atom/apm/issues/635
-
Hey, thanks for advising us how to install the modules, but I´m still struggling to find a solution for me even after updating nodejs and npm to the latest builts…
Similar error with corrected package.json.Unable to find electron-prebuilt's version number, either install it or specify an explicit versionI even tried the
npm rebuild@Mar suggested. My last attempt to get this working was updating electron to its newest version but this didn´t help either.
Is there anything I could further try to install this module correctly? -
@Jay I forgot what I did here to fix this issue. But to be honest after I got this working it still wasnt perfect. I ended going the route of a script on startup that controls the PIR sensor and its been perfect since and simple.
-
did you install the fix? or is this now obsolet?
-
@fox This PR should have fixed the issue (it is merged into the master).
Are you running MagicMirror
2.1.0? And is your PIR-Module up-to-date? Try updating both (see this and do it in both directories) to the newest version.Helpful sticky: How to troubleshoot
-
@Jopyth said in [MMM-PIR-Sensor] Install failing:
@fox This PR should have fixed the issue (it is merged into the master).
Are you running MagicMirror
2.1.0? And is your PIR-Module up-to-date? Try updating both (see this and do it in both directories) to the newest version.I deleted PIR Sensor completely. And made a new installation of this module and it installed without Problems. looks good from now
-
This post is deleted! -
Hi, i tried to install the module MMM-PIR-Sensor. I did it like its explained here:
https://github.com/paviro/MMM-PIR-Sensor
After installing the module i opened the config.js file an added:
{ module: 'MMM-PIR-Sensor', config: { sensorPIN: 23, powerSaving: true, relayPIN: none, relayOnState: 1, } },The way i connected the sensor is shown in the following picture:
But when i want to start the magic mirror it says that i have to add a correct config.js file.
What did i wrong? Please help me guys ;) -
@STEFF92
Did you change the name of the config File from “config.js.sample” to “config.js”? -
@Jay yes i did. The basic modules like clock or weather are running but when i add the module for the PIR sensor in the config.js file i cant start the magic mirror
-
Delete the ‘,’ in te last line (relayOnState: 1)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login