MagicMirror Forum
    • Recent
    • Tags
    • Unsolved
    • Solved
    • MagicMirror² Repository
    • Documentation
    • 3rd-Party-Modules
    • Donate
    • Discord
    • Register
    • Login
    A New Chapter for MagicMirror: The Community Takes the Lead
    Read the statement by Michael Teeuw here.

    [MMM-PIR-Sensor] Install failing

    Scheduled Pinned Locked Moved Troubleshooting
    75 Posts 19 Posters 105.5k Views 18 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M Offline
      Makradon @Jopyth
      last edited by Makradon

      @Jopyth said in [MMM-PIR-Sensor] Install failing:

      @Makradon Nope, definitely not the same numbering.

      Now I’m confused.

      5V is Pin 2
      Ground is Pin 6
      I think that is right when you count like this:

      http://www.elektronik-kompendium.de/sites/raspberry-pi/fotos/raspberry-pi-15b.jpg

      And when you don’t change the pin in the config file it says SensorPin 22.
      So which is the right pin in the pic above to connect the output of the PIR sensor that it works with this module?

      J 1 Reply Last reply Reply Quote 0
      • J Offline
        Jopyth Moderator @Makradon
        last edited by Jopyth

        @Makradon Sensor PIN 22 for the PIR-Sensor module is this one:
        0_1485851151185_raspberry-pi-15b.jpg

        Edit: Maybe I was confused by the diagram of the DHT22 module. It looked to me like the GPIO and WiringPi numbers are different.

        Helpful sticky: How to troubleshoot

        johnnyboyJ 1 Reply Last reply Reply Quote 1
        • P Offline
          PindaPower
          last edited by

          In other post they posted this link, maybe it will help??
          https://diyhacking.com/raspberry-pi-gpio-control/

          foxF 1 Reply Last reply Reply Quote 1
          • foxF Offline
            fox @PindaPower
            last edited by

            @PindaPower said in [MMM-PIR-Sensor] Install failing:

            In other post they posted this link, maybe it will help??
            https://diyhacking.com/raspberry-pi-gpio-control/

            Thank you. With that i understood the delay and sensitivy knob.
            But! When i put sensivity at most right, the monitor goes on automatically ON after a while, even when there is NO movement in the radius… How can i debug this?

            Issues With MMM-WatchDog known?

            https://forum.magicmirror.builders/post/29827

            Useful for PIR-Sensor: https://forum.magicmirror.builders/post/21299

            1 Reply Last reply Reply Quote 0
            • M Offline
              Mar
              last edited by Mar

              I’ve tried following the instruction above of removing and reinstalling but I keep getting the below errors. I’m not even sure what they are unfortunately, wondering if anyone is able to help.

              pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install
npm WARN engine electron-rebuild@1.5.7: wanted: {"node":">=6.0.0"} (current: {"node":"4.2.1","npm":"2.14.7"})
 
> epoll@0.1.20 install /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/node_modules/epoll
> node-gyp rebuild

make: Entering directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/node_modules/epoll/build'
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make: Leaving directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/onoff/node_modules/epoll/build'
-
> Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor
> electron-rebuild -e ../../node_modules/electron-prebuilt

/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/node_modules/spawn-rx/lib/index.js:139
    let cmdArgs = ['/C', exe, ...args];
                              ^^^

SyntaxError: Unexpected token ...
    at exports.runInThisContext (vm.js:53:16)
    at Module._compile (module.js:414:25)
    at Object.Module._extensions..js (module.js:442:10)
    at Module.load (module.js:356:32)
    at Function.Module._load (module.js:311:12)
    at Module.require (module.js:366:17)
    at require (module.js:385:17)
    at Object. (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/rebuild.js:38:16)
    at Module._compile (module.js:435:26)
    at Object.Module._extensions..js (module.js:442:10)
    at Module.load (module.js:356:32)
    at Function.Module._load (module.js:311:12)
    at Module.require (module.js:366:17)
    at require (module.js:385:17)
    at Object. (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:24:16)
    at Module._compile (module.js:435:26)

npm ERR! Linux 4.4.38+
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install"
npm ERR! node v4.2.1
npm ERR! npm  v2.14.7
npm ERR! code ELIFECYCLE
npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron-prebuilt`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron-prebuilt'.
npm ERR! This is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron-rebuild -e ../../node_modules/electron-prebuilt
npm ERR! You can get their info via:
npm ERR!     npm owner ls Magic-Mirror-Module-PIR-Sensor
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log

              edit: I have tried modifying the package.json file in the FAQ but the install exits within a minute, vs a really long time leaving the original. Seems like it gets farther through the install the first time. Though I’ve noticed i do have the electron folder and not an electron-prebuilt. The following is the error I get when i remove the -prebuilt.

              pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install
|
> Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor
> electron-rebuild -e ../../node_modules/electron

/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/node_modules/spawn-rx/lib/index.js:139
    let cmdArgs = ['/C', exe, ...args];
                              ^^^

SyntaxError: Unexpected token ...
    at exports.runInThisContext (vm.js:53:16)
    at Module._compile (module.js:414:25)
    at Object.Module._extensions..js (module.js:442:10)
    at Module.load (module.js:356:32)
    at Function.Module._load (module.js:311:12)
    at Module.require (module.js:366:17)
    at require (module.js:385:17)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/rebuild.js:38:16)
    at Module._compile (module.js:435:26)
    at Object.Module._extensions..js (module.js:442:10)
    at Module.load (module.js:356:32)
    at Function.Module._load (module.js:311:12)
    at Module.require (module.js:366:17)
    at require (module.js:385:17)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:24:16)
    at Module._compile (module.js:435:26)

npm ERR! Linux 4.4.38+
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install"
npm ERR! node v4.2.1
npm ERR! npm  v2.14.7
npm ERR! code ELIFECYCLE
npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron'.
npm ERR! This is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron-rebuild -e ../../node_modules/electron
npm ERR! You can get their info via:
npm ERR!     npm owner ls Magic-Mirror-Module-PIR-Sensor
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log

              After doing the npm rebuild suggested above I get this error (with original/modified package.json)

              pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install
-
> Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor
> electron-rebuild -e ../../node_modules/electron-prebuilt

/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/node_modules/spawn-rx/lib/index.js:139
    let cmdArgs = ['/C', exe, ...args];
                              ^^^

SyntaxError: Unexpected token ...
    at exports.runInThisContext (vm.js:53:16)
    at Module._compile (module.js:414:25)
    at Object.Module._extensions..js (module.js:442:10)
    at Module.load (module.js:356:32)
    at Function.Module._load (module.js:311:12)
    at Module.require (module.js:366:17)
    at require (module.js:385:17)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/rebuild.js:38:16)
    at Module._compile (module.js:435:26)
    at Object.Module._extensions..js (module.js:442:10)
    at Module.load (module.js:356:32)
    at Function.Module._load (module.js:311:12)
    at Module.require (module.js:366:17)
    at require (module.js:385:17)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:24:16)
    at Module._compile (module.js:435:26)

npm ERR! Linux 4.4.38+
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install"
npm ERR! node v4.2.1
npm ERR! npm  v2.14.7
npm ERR! code ELIFECYCLE
npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron-prebuilt`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron-prebuilt'.
npm ERR! This is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron-rebuild -e ../../node_modules/electron-prebuilt
npm ERR! You can get their info via:
npm ERR!     npm owner ls Magic-Mirror-Module-PIR-Sensor
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log
              J 1 Reply Last reply Reply Quote 0
              • J Offline
                Jopyth Moderator @Mar
                last edited by

                @Mar said in [MMM-PIR-Sensor] Install failing:

                I’ve tried following the instruction above of removing and reinstalling but I keep getting the below errors. I’m not even sure what they are unfortunately, wondering if anyone is able to help.

                pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install
npm WARN engine electron-rebuild@1.5.7: wanted: {"node":">=6.0.0"} (current: {"node":"4.2.1","npm":"2.14.7"})

                This is an old node version. Please update your node and npm. (If you need help check the answers to this SO question.)

                Helpful sticky: How to troubleshoot

                M 1 Reply Last reply Reply Quote 2
                • foxF Offline
                  fox
                  last edited by

                  @Jopyth thank you very much for all your efforts for this community.
                  Even its in your spare time it should be honored !

                  Issues With MMM-WatchDog known?

                  https://forum.magicmirror.builders/post/29827

                  Useful for PIR-Sensor: https://forum.magicmirror.builders/post/21299

                  1 Reply Last reply Reply Quote 1
                  • M Offline
                    Mar @Jopyth
                    last edited by

                    @Jopyth Hi, thanks for taking the time to respond to this. Sorry I was away for work and didnt have too much time to test this out.

                    So i managed to, using your link, to update node. But there was issues even getting there, I had to use an older version of node to update npm…but anyways here is the output showing I’ve updated to the latest version.

                    pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm -v
4.0.5
pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ node -v
v7.4.0

                    But now I’m getting this issue. Again thanks @Jopyth for responding so quickly last time.

                    pi@raspberrypi:~/MagicMirror/modules/MMM-PIR-Sensor $ npm install
npm WARN prefer global node-gyp@3.5.0 should be installed with -g

> epoll@0.1.20 install /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll
> node-gyp rebuild

make: Entering directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build'
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make: Leaving directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build'

> Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor
> electron-rebuild -e ../../node_modules/electron-prebuilt

An unhandled error occurred inside electron-rebuild
Unable to find electron-prebuilt's version number, either install it or specify an explicit version

Error: Unable to find electron-prebuilt's version number, either install it or specify an explicit version
    at _callee$ (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:74:17)
    at tryCatch (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:63:40)
    at Generator.invoke [as _invoke] (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:337:22)
    at Generator.prototype.(anonymous function) [as next] (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:96:21)
    at Generator.tryCatcher (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bluebird/js/release/util.js:16:23)
    at PromiseSpawn._promiseFulfilled (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bluebird/js/release/generators.js:97:49)
    at /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bluebird/js/release/generators.js:201:15
    at Object. (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/electron-rebuild/lib/cli.js:197:4)
    at Module._compile (module.js:571:32)
    at Object.Module._extensions..js (module.js:580:10)
    at Module.load (module.js:488:32)
    at tryModuleLoad (module.js:447:12)
    at Function.Module._load (module.js:439:3)
    at Module.runMain (module.js:605:10)
    at run (bootstrap_node.js:420:7)
    at startup (bootstrap_node.js:139:9)

npm ERR! Linux 4.4.38+
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install"
npm ERR! node v7.4.0
npm ERR! npm  v4.0.5
npm ERR! code ELIFECYCLE
npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron-prebuilt`
npm ERR! Exit status 255
npm ERR! 
npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron-prebuilt'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron-rebuild -e ../../node_modules/electron-prebuilt
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs Magic-Mirror-Module-PIR-Sensor
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls Magic-Mirror-Module-PIR-Sensor
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log
                    J 1 Reply Last reply Reply Quote 0
                    • J Offline
                      Jopyth Moderator @Mar
                      last edited by

                      @Mar Please change your package.json file as displayed here and execute npm install again. @paviro has not yet responded to my PR, but hopefully this will get merged in sooner or later.

                      Helpful sticky: How to troubleshoot

                      M 3 Replies Last reply Reply Quote 1
                      • M Offline
                        Mar @Jopyth
                        last edited by

                        @Jopyth It finally worked!!! :lifter_tone2: thanks so much. Ive spent days on this :(

                        Tried this last link you provided previously before posting but nothing was working, your support around getting node updated (and npm) was all that needed to happen first.

                        Thanks again!

                        1 Reply Last reply Reply Quote 1
                        • M Offline
                          Mar @Jopyth
                          last edited by Mar

                          @Jopyth Though looks like its failing on the config file now, Do you see any issues with the following?

                                         {
                        module: 'MMM-PIR-Sensor',
                        config: {
                                sensorPin: 17,
                        }
                },

                          i seem to get an error and MM doesnt load when this is in the config file. I can even have disabled:true and it loads, otherwise I’ll get a blank webpage.

                          1 Reply Last reply Reply Quote 0
                          • M Offline
                            Mar @Jopyth
                            last edited by Mar

                            @Jopyth

                            using PM2 Im able to get the logs when starting, and even though it installed with your instructions i now get this error in the logs.

                            0|mm       | Error: The module '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build/Release/epoll.node'
0|mm       | was compiled against a different Node.js version using
0|mm       | NODE_MODULE_VERSION 50. This version of Node.js requires
0|mm       | NODE_MODULE_VERSION 51. Please try re-compiling or re-installing
0|mm       | the module (for instance, using `npm rebuild` or`npm install`).
0|mm       |     at Object.Module._extensions..node (module.js:598:18)
0|mm       |     at Module.load (module.js:488:32)
0|mm       |     at tryModuleLoad (module.js:447:12)
0|mm       |     at Function.Module._load (module.js:439:3)
0|mm       |     at Module.require (module.js:498:17)
0|mm       |     at require (internal/module.js:20:19)
0|mm       |     at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:76:44)
0|mm       |     at Object. (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/epoll.js:1:99)
0|mm       |     at Module._compile (module.js:571:32)
0|mm       |     at Object.Module._extensions..js (module.js:580:10)
0|mm       | unclutter: someone created a sub-window to my sub-window! giving up
                            M 1 Reply Last reply Reply Quote 0
                            • M Offline
                              Mar @Mar
                              last edited by

                              @Mar for anyone else who is getting this an npm rebuild fixes it. from here https://github.com/atom/apm/issues/635

                              1 Reply Last reply Reply Quote 2
                              • JayJ Offline
                                Jay
                                last edited by

                                Hey, thanks for advising us how to install the modules, but I´m still struggling to find a solution for me even after updating nodejs and npm to the latest builts…
                                Similar error with corrected package.json.

                                Unable to find electron-prebuilt's version number, either install it or specify an explicit version

                                I even tried the npm rebuild @Mar suggested. My last attempt to get this working was updating electron to its newest version but this didn´t help either.
                                Is there anything I could further try to install this module correctly?

                                M 1 Reply Last reply Reply Quote 0
                                • M Offline
                                  Mar @Jay
                                  last edited by

                                  @Jay I forgot what I did here to fix this issue. But to be honest after I got this working it still wasnt perfect. I ended going the route of a script on startup that controls the PIR sensor and its been perfect since and simple.

                                  1 Reply Last reply Reply Quote 0
                                  • foxF Offline
                                    fox
                                    last edited by

                                    did you install the fix? or is this now obsolet?

                                    Issues With MMM-WatchDog known?

                                    https://forum.magicmirror.builders/post/29827

                                    Useful for PIR-Sensor: https://forum.magicmirror.builders/post/21299

                                    J 1 Reply Last reply Reply Quote 0
                                    • J Offline
                                      Jopyth Moderator @fox
                                      last edited by Jopyth

                                      @fox This PR should have fixed the issue (it is merged into the master).

                                      Are you running MagicMirror 2.1.0? And is your PIR-Module up-to-date? Try updating both (see this and do it in both directories) to the newest version.

                                      Helpful sticky: How to troubleshoot

                                      foxF 1 Reply Last reply Reply Quote 1
                                      • foxF Offline
                                        fox @Jopyth
                                        last edited by

                                        @Jopyth said in [MMM-PIR-Sensor] Install failing:

                                        @fox This PR should have fixed the issue (it is merged into the master).

                                        Are you running MagicMirror 2.1.0? And is your PIR-Module up-to-date? Try updating both (see this and do it in both directories) to the newest version.

                                        I deleted PIR Sensor completely. And made a new installation of this module and it installed without Problems. looks good from now

                                        Issues With MMM-WatchDog known?

                                        https://forum.magicmirror.builders/post/29827

                                        Useful for PIR-Sensor: https://forum.magicmirror.builders/post/21299

                                        1 Reply Last reply Reply Quote 1
                                        • johnnyboyJ Offline
                                          johnnyboy
                                          last edited by johnnyboy

                                          This post is deleted!
                                          1 Reply Last reply Reply Quote 0
                                          • S Offline
                                            STEFF92
                                            last edited by

                                            Hi, i tried to install the module MMM-PIR-Sensor. I did it like its explained here:

                                            https://github.com/paviro/MMM-PIR-Sensor

                                            After installing the module i opened the config.js file an added:

                                            {
			module: 'MMM-PIR-Sensor',
			config: {
				sensorPIN: 23,
                                powerSaving: true,
                                relayPIN: none,
                                relayOnState: 1,
			}
		},

                                            The way i connected the sensor is shown in the following picture:

                                            alt text

                                            But when i want to start the magic mirror it says that i have to add a correct config.js file.
                                            What did i wrong? Please help me guys ;)

                                            JayJ johnnyboyJ 2 Replies Last reply Reply Quote 0

                                            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                            With your input, this post could be even better 💗

                                            Register Login
                                            • 1
                                            • 2
                                            • 3
                                            • 4
                                            • 2 / 4
                                            • First post
                                              Last post
                                            Enjoying MagicMirror? Please consider a donation!
                                            MagicMirror created by Michael Teeuw.
                                            Forum managed by Sam, technical setup by Karsten.
                                            This forum is using NodeBB as its core | Contributors
                                            Contact | Privacy Policy