Problems with weather modules on new install

erik72

Thanks that worked, but every other time i change something i change something in config.js. I get the following error during startup :100:

Whoops! There was an uncaught exception…
{ Error: listen EADDRINUSE :::8080
at Object.exports._errnoException (util.js:1022:11)
at exports._exceptionWithHostPort (util.js:1045:20)
at Server._listen2 (net.js:1262:14)
at listen (net.js:1298:10)
at Server.listen (net.js:1376:9)
at new Server (/home/pi/MagicMirror/js/server.js:27:9)
at /home/pi/MagicMirror/js/app.js:219:18
at loadNextModule (/home/pi/MagicMirror/js/app.js:168:5)
at /home/pi/MagicMirror/js/app.js:163:6
at Class.loaded (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:19:3)
code: ‘EADDRINUSE’,
errno: ‘EADDRINUSE’,
syscall: ‘listen’,
address: ‘::’,
port: 8080 }

first time it was the default config.js where i changed this line:
ipWhitelist: [], // Set [] to allow all IP addresses.

then i can copy config.js.sample to config,js and it works again

i edit in nano

Mykle1

@erik72

Paste your config.js file here. Remove your API keys first and precede the paste with three back ticks.

erik72

@Mykle1
Got it working somehow :-) thanks for taking the time

Mykle1

@erik72 said in Problems with weather modules on new install:

Got it working somehow thanks for taking the time

Even better. Enjoy your mirror.

bhepler

@erik72 said in Problems with weather modules on new install:

EADDRINUSE

This usually means that you already have the mirror process running and attempted to start it again.

erik72

@bhepler
Perhaps I am starting/stopping in a wrong way.
Because often when I have made a config change it will fail, but work after a reboot.
I use npm start and Ctrl-Z in terminal to quit.

bhepler

@erik72 If you’re working directly on the pi, you can use ctrl+q to stop the interface and return to the terminal. If you’re using SSH to remote into the pi, then ctrl+c should stop it right nicely.

You can always check to see if the mirror is running by typing ps ax | grep node. If you get anything in response more than 6957 pts/19 S+ 0:00 grep --color=auto node (where 6975 will be some random number) then the MM process is running and you’ll need to shut it down in order for it to process your changes.

erik72

@bhepler
Thanks, will give it a try.
This is a really friendly forum :-)