Cannot access to MagicMirror despite IpWhiteList

[MrNonoss]

Hi all,

I come back with a hint…
There are two web server on my computer, but I didn’t installed any “Apache” or so, so I didn’t configured anything
One is with Home Assistant (coded in Python) and the other one is the MagicMiror.

Could it be a sort of conflict between these two?

[Mykle1]

@MrNonoss

If you remove or disable Home Assistant can you then connect to MagicMirror?

[MrNonoss]

There’s no other option than deleting the installation folder.
I tried, but, with no succes.

I’m bored. Il will try to reinstall the whole things, starting by MM, testing --> If Ok --> Then Install Home Assistant and test again, it will give tips (I hope)

Thank you again Mykle

[Mykle1]

@MrNonoss

You’re welcome, mate.

I agree. Install MM first and get your connection established. Let me know how you make out.

[MrNonoss]

Hi everyone,

Problem solved with a new fresh install. Unfortunately, the issue came from me.
From my config.js to be more accurate.

My exact config.js was:

var config = {
	port: 8080,
	adress: "0.0.0.0",
	ipWhitelist: ["127.0.0.1", "192.168.1.1/24", "192.168.2.1/24", "192.168.2.100"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

My new and working one is the one Mykle1 gave me:

var config = {
        port: 8080,
        address: "0.0.0.0",
        ipWhitelist: [],

I assume it’s a coma mistake.
Nothing to do with multi web server.

Thank you again for your help.
Best regards