1 old noob + 1 rPi = I can't believe I did it! (revisited)

Mykle1

@Peter

Pay particular attention to this line:

PM2 will now show you a command you need to execute.

Most people miss this step. You have to execute the command that appears.

And lastly, you have to save the PM2 state

Mykle1

Hello Lucy! (my granddaughter)

And here are the modifications I’ve made in Lucy’s name so far.
https://youtu.be/M9C0ppGFJik

Chris

Hello,

Superb work, as usual :)

Could you point me to how to put this system in place?

Having already installed the open-jarvis solution, I do not know if it would create a conflict or if I have to adapt your solution via jarvis voice recognition.

Thank you in advance, truthfully yours,

Mykle1

@Chris

This is my own personal project at the moment. It involves many, many modifications to the MMM-voice module and any module that will be used in conjunction with it. I only just recently got it working to some satisfaction but I am still working on it. It’s going to take some time before I am done with it because I hope to add more features to it. I’ll keep you posted.

It may create a conflict for you and jarvis voice when all is said and done.

Chris

@Mykle1

Hello,

This seems very promising,
I would follow with great interest this project,

Good luck to you for the future,

Mykle1

@Chris said in 1 old noob + 1 rPi = I can’t believe I did it! (revisited):

Could you point me to how to put this system in place?

Hi Chris,

I put together a repo with directions on how to use this system. I don’t know if you’re going to run into any problems with jarvis but this will work with any module you choose with some modifications on your part. It’s all in the directions.

https://github.com/mykle1/Hello-Lucy

And the most recent video with sound enhancement to the system

https://youtu.be/ZXWf7s3K3as

strawberry 3.141

@Mykle1 looks good

Chris

@Mykle1
Hello,
Very good work,
I will be happy to test it on PI sometime this week as soon as I have time and you will return,

thank you very much

Mykle1

@strawberry-3.141

I don’t know about that, but it does work, even if it’s not done the proper way. I’m happy with it. It does what I want it to do and it works amazingly well on an old laptop.

Mykle1

@Chris said in 1 old noob + 1 rPi = I can’t believe I did it! (revisited):

thank you very much

You’re welcome, mate. Let me know how it goes

Mykle1

Hello Lucy with Pages!

https://youtu.be/bKHEXPzVb2A

Mykle1

Just tested some new commands for turning off (standby) and on the display. Works on a laptop AND a desktop machine with monitor connected through DVI

Mykle1

Improved page functionality. Each page command will hide the previous page while still retaining the ability to hide and show individual modules and put the display into standby and wake it up. “Please Wake Up” will show the last used configuration as “Go To Sleep” affects the monitor, not MM. :-)

https://www.youtube.com/watch?v=2-K5NlT9zgQ

Mykle1

Bone diggity

Mykle1

Mykle1

https://youtu.be/M3QvF-ctZEA

Mykle1

Ridiculous!

https://youtu.be/08Ueb_cg9oA

Mykle1

https://youtu.be/syr_GCnpv2A

achillealb

@Mykle1 said in 1 old noob + 1 rPi = I can’t believe I did it! (revisited):

Hello Lucy with Pages!

https://youtu.be/bKHEXPzVb2A

'HIDE PAGE ONE',  'SHOW PAGE ONE',   for example page
		'HIDE PAGE TWO',  'SHOW PAGE TWO',   for example page
		'HIDE PAGE THREE','SHOW PAGE THREE', for example page

works with the MMM-pages module or which module uses ???
then post your config.js file

Mykle1

@achillealb said in 1 old noob + 1 rPi = I can’t believe I did it! (revisited):

works with the MMM-pages module or which module uses ???
then post your config.js file

Uhh . . . I’m sorry but you’ll have to be a bit clearer in your question. I’m not sure of what you are asking me.