MagicMirror Forum
    • Recent
    • Tags
    • Unsolved
    • Solved
    • MagicMirror² Repository
    • Documentation
    • 3rd-Party-Modules
    • Donate
    • Discord
    • Register
    • Login
    A New Chapter for MagicMirror: The Community Takes the Lead
    Read the statement by Michael Teeuw here.

    Something is wrong ....

    Scheduled Pinned Locked Moved
    Troubleshooting
    4
    19
    6.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      Peter
      last edited by

      I need some help: I own a Pi2 and a Pi3.
      On both I can run MM.
      MM is on two different sd cards (almost identical).
      After a few hours running MM stops and restarts or MM freezes and does not restart.
      I have the following modules:
      Updatenotification
      Systemtemperature
      Moonphase
      Watchdog
      Clock
      Calendar monthly
      Calendar
      Movielisting
      NOAA
      Formula1
      Imagephotos
      Newsfeed

      It runs nice, so I think the config is ok.
      Freezing or restarting happens with both the Pi2 as the Pi3, so I think it is not the hardware.
      Where do I start troubleshooting (maybe the pictures in Imagephotos?)
      Thanks.
      Peter

      1 Reply Last reply Reply Quote 0
      • R
        retroflex Project Sponsor Module Developer
        last edited by

        Is it the same as my error?
        https://forum.magicmirror.builders/topic/6181/mirror-turning-black-after-a-while

        I do not have restarts of freezes, but everything turning black though. Can you reach your mirror through SSH after a freeze?

        P 1 Reply Last reply Reply Quote 0
        • P
          Peter @retroflex
          last edited by

          @retroflex , I can reach my mirror after freezing with VNC.
          But the Jessie GUI is also frozen; time has stopped …
          So maybe the problem is Jessie?
          I use normal Jessie, not lite.
          Peter

          Mykle1M 1 Reply Last reply Reply Quote 0
          • Mykle1M
            Mykle1 Project Sponsor Module Developer @Peter
            last edited by

            @Peter said in Something is wrong ....:

            So maybe the problem is Jessie?

            I doubt very much that the problem is Jessie. It’s the most stable OS for MM that I’ve found, aside from ubuntu. If there was a problem with the installation of Jessie then that would be another matter completely.

            Have you tried running just the default modules to see if the problem still occurs?

            Create a working config
            How to add modules

            P 1 Reply Last reply Reply Quote 0
            • P
              Peter @Mykle1
              last edited by

              @Mykle1 , thanks.
              I think that is the only way: start with the default modules and the rest one by one until the problem occurs.
              Peter

              cruunnerrC 1 Reply Last reply Reply Quote 1
              • cruunnerrC
                cruunnerr
                last edited by

                Had/Have the same problem. I just copied all modules and the config of my main running RPi 3.
                I set up a RPi 2 with the copied files just for experimental usage. When i run up both at the same time my RPi 3 stops after a few minutes or 1-2 hours and put these errors:

                Tue Jan 16 2018 06:51:13 GMT+0100 (CET) - WatchDog: Heartbeat timeout. Frontend might have crashed. Exit now.
fatal: unable to access 'https://github.com/MichMich/MMM-WatchDog.git/': SSL connection timeout

fatal: unable to access 'https://github.com/vicmora/MMM-GoogleMapsTraffic.git/': SSL connection timeout

fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': SSL connection timeout

fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': SSL connection timeout

fatal: unable to access 'https://github.com/vicmora/MMM-GoogleMapsTraffic.git/': SSL connection timeout

fatal: unable to access 'https://github.com/Jopyth/MMM-Buttons.git/': SSL connection timeout

fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': SSL connection timeout

fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': SSL connection timeout

fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': SSL connection timeout

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': SSL connection timeout

fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': SSL connection timeout

fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': SSL connection timeout

fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': SSL connection timeout

fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': SSL connection timeout

fatal: unable to access 'https://github.com/MichMich/MMM-WatchDog.git/': SSL connection timeout

fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': SSL connection timeout

fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': SSL connection timeout

fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': SSL connection timeout

fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': SSL connection timeout

fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': SSL connection timeout

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': SSL connection timeout

fatal: unable to access 'https://github.com/MichMich/MagicMirror/': SSL connection timeout

fatal: unable to access 'https://github.com/Jopyth/MMM-Buttons.git/': SSL connection timeout

fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': SSL connection timeout

fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': Couldn't connect to server

fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': Couldn't connect to server

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/MichMich/MagicMirror/': Couldn't connect to server

fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': Couldn't connect to server

fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': Couldn't connect to server

fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': Couldn't connect to server

fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/MichMich/MagicMirror/': Couldn't connect to server

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': Couldn't connect to server

fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': Couldn't connect to server

fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': Couldn't connect to server

                Even if i run just the modules without an API the problem comes up. Don’t know why yet

                1 Reply Last reply Reply Quote 0
                • cruunnerrC
                  cruunnerr @Peter
                  last edited by

                  @Peter

                  Lets write here, so the other thread would not be filled up with this problem ;)

                  so u don’t know how it starts. That sound like u used the automatic installer and clicked “YES” when it asked u to start automatically.

                  Please type in console:

                  pm2 status
                  U will see a process name (probably “MagicMirror”)

                  now u can use
                  pm2 start MagicMirror to start MM
                  pm2 stop MagicMirror to stop MM
                  pm2 restart MagicMirror to restart MM

                  or even
                  pm2 logs MagicMirror to see logs and errors. Please try if i am right and then post the error log here

                  P 1 Reply Last reply Reply Quote 2
                  • P
                    Peter @cruunnerr
                    last edited by

                    @cruunnerr after typing pm2 status I see two processes:
                    MagicMirror online
                    mm. stopped

                    after typing pm2 stop MagicMirror both processes are stopped.
                    Peter

                    1 Reply Last reply Reply Quote 0
                    • cruunnerrC
                      cruunnerr
                      last edited by cruunnerr

                      alright. so u used the automatic installer AND did the “how to autostart”-Tutorial from MichMich, too ^^

                      no problem, we will try to fix. As u can read here, ninjabreadman wrote how to remove one of the instances.

                      so please try:

                      cd
                      pm2 stop mm && pm2 delete mm && pm2 save
                      rm mm.sh

                      now there should just be the “MagicMirror” process even when u reboot.

                      Better now, to erase all logs and wait, if your problems come up again. So type:

                      pm2 flush

                      Next time u got any problems, please type:
                      pm2 logs MagicMirror
                      and post it here

                      Hope that will help ;)

                      1 Reply Last reply Reply Quote 1
                      • P
                        Peter
                        last edited by

                        Thanks!
                        Great help!
                        I hope this helps.
                        Next time I will post my error logs here.
                        peter

                        1 Reply Last reply Reply Quote 0
                        • 1
                        • 2
                        • 1 / 2
                        • First post
                          Last post
                        Enjoying MagicMirror? Please consider a donation!
                        MagicMirror created by Michael Teeuw.
                        Forum managed by Sam, technical setup by Karsten.
                        This forum is using NodeBB as its core | Contributors
                        Contact | Privacy Policy