Read the statement by Michael Teeuw here.
Something is wrong ....
-
@retroflex , I can reach my mirror after freezing with VNC.
But the Jessie GUI is also frozen; time has stopped …
So maybe the problem is Jessie?
I use normal Jessie, not lite.
Peter -
@Peter said in Something is wrong ....:
So maybe the problem is Jessie?
I doubt very much that the problem is Jessie. It’s the most stable OS for MM that I’ve found, aside from ubuntu. If there was a problem with the installation of Jessie then that would be another matter completely.
Have you tried running just the default modules to see if the problem still occurs?
-
@Mykle1 , thanks.
I think that is the only way: start with the default modules and the rest one by one until the problem occurs.
Peter -
Had/Have the same problem. I just copied all modules and the config of my main running RPi 3.
I set up a RPi 2 with the copied files just for experimental usage. When i run up both at the same time my RPi 3 stops after a few minutes or 1-2 hours and put these errors:Tue Jan 16 2018 06:51:13 GMT+0100 (CET) - WatchDog: Heartbeat timeout. Frontend might have crashed. Exit now. fatal: unable to access 'https://github.com/MichMich/MMM-WatchDog.git/': SSL connection timeout fatal: unable to access 'https://github.com/vicmora/MMM-GoogleMapsTraffic.git/': SSL connection timeout fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': SSL connection timeout fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': SSL connection timeout fatal: unable to access 'https://github.com/vicmora/MMM-GoogleMapsTraffic.git/': SSL connection timeout fatal: unable to access 'https://github.com/Jopyth/MMM-Buttons.git/': SSL connection timeout fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': SSL connection timeout fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': SSL connection timeout fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': SSL connection timeout fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': SSL connection timeout fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': SSL connection timeout fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': SSL connection timeout fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': SSL connection timeout fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': SSL connection timeout fatal: unable to access 'https://github.com/MichMich/MMM-WatchDog.git/': SSL connection timeout fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': SSL connection timeout fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': SSL connection timeout fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': SSL connection timeout fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': SSL connection timeout fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': SSL connection timeout fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': SSL connection timeout fatal: unable to access 'https://github.com/MichMich/MagicMirror/': SSL connection timeout fatal: unable to access 'https://github.com/Jopyth/MMM-Buttons.git/': SSL connection timeout fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': SSL connection timeout fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': Couldn't connect to server fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': Couldn't connect to server fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': Couldn't connect to server fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': Couldn't connect to server fatal: unable to access 'https://github.com/MichMich/MagicMirror/': Couldn't connect to server fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': Couldn't connect to server fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': Couldn't connect to server fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': Couldn't connect to server fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': Couldn't connect to server fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': Couldn't connect to server fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': Couldn't connect to server fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': Couldn't connect to server fatal: unable to access 'https://github.com/MichMich/MagicMirror/': Couldn't connect to server fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': Couldn't connect to server fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': Couldn't connect to server fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': Couldn't connect to server fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': Couldn't connect to server fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': Couldn't connect to server fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': Couldn't connect to server fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': Couldn't connect to server fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': Couldn't connect to serverEven if i run just the modules without an API the problem comes up. Don’t know why yet
-
Lets write here, so the other thread would not be filled up with this problem ;)
so u don’t know how it starts. That sound like u used the automatic installer and clicked “YES” when it asked u to start automatically.
Please type in console:
pm2 status
U will see a process name (probably “MagicMirror”)now u can use
pm2 start MagicMirrorto start MM
pm2 stop MagicMirrorto stop MM
pm2 restart MagicMirrorto restart MMor even
pm2 logs MagicMirrorto see logs and errors. Please try if i am right and then post the error log here -
@cruunnerr after typing pm2 status I see two processes:
MagicMirror online
mm. stoppedafter typing pm2 stop MagicMirror both processes are stopped.
Peter -
alright. so u used the automatic installer AND did the “how to autostart”-Tutorial from MichMich, too ^^
no problem, we will try to fix. As u can read here, ninjabreadman wrote how to remove one of the instances.
so please try:
cd
pm2 stop mm && pm2 delete mm && pm2 save
rm mm.shnow there should just be the “MagicMirror” process even when u reboot.
Better now, to erase all logs and wait, if your problems come up again. So type:
pm2 flushNext time u got any problems, please type:
pm2 logs MagicMirror
and post it hereHope that will help ;)
-
Thanks!
Great help!
I hope this helps.
Next time I will post my error logs here.
peter -
Lets hope there will be no “next time” ;)
-
Unfortunately the problem is not solved.
Maybe somebody can have a look at my config.js?/* Magic Mirror Config Sample * * By Michael Teeuw http://michaelteeuw.nl * MIT Licensed. * * For more information how you can configurate this file * See https://github.com/MichMich/MagicMirror#configuration * */ var config = { address: "localhost", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "", "0.0.0.0", "::" to listen on any interface // Default, when address config is left out, is "localhost" port: 8080, ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], language: "nl", timeFormat: 24, units: "metric", modules: [ { module: 'MMM-WatchDog', config: { // See 'Configuration options' for more information. } }, { module: 'mmm-systemtemperature', position: 'top_center', // This can be any of the regions. classes: 'xsmall dimmed', // Add your own styling. Optional. config: { // See 'Configuration options' for more information. } }, { module: 'mmm-wu-moonphase', header: '', // optionally you can add a header to this block position: 'top_center', // this can be any of the regions. config: { // See 'Configuration options' for more information. apikey: 'xxxxxxxxxxxx', country: 'Nederland', city: 'Apeldoorn', apiLang: 'NL', } }, { module: "clock", position: "top_left" }, { module: 'calendar_monthly', position: 'top_left', config: { // The config property is optional // Without a config, a default month view is shown // Please see the 'Configuration Options' section for more information } }, { module: "calendar", header: "Feestdagen en agenda", position: "top_left", config: { maximumEntries: '10', timeFormat: 'absolute', urgency: 0, getRelative: 0, dateFormat: 'D MMM', fullDayEventDateFormat: 'D MMM', fadePoint: 0.50, // Start on 1/4th of the list. calendars: [ { symbol: 'calendar-check-o ', url: 'https://www.mozilla.org/media/caldata/DutchHolidays.ics' }, { symbol: 'flag-checkered', url: 'http://localhost:8080/MMM-Formula1/schedule.ics', }, { symbol: 'university ', url: 'https://calendar.google.com/calendar/ical/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxgroup.calendar.google.com/private-5926e1a950f5588d305e66d8b0af0cfa/basic.ics' }, { url: 'https://calendar.google.com/calendar/ical/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxgroup.calendar.google.com/private-754f959bc1afb34da4f5ec42e92b1d01/basic.ics' }, { symbol: 'birthday-cake ', url: 'https://calendar.google.com/calendar/ical/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxgroup.calendar.google.com/private-2f98381b817baa8eb5bce7f11ac22120/basic.ics' }, ] } }, { module: "MMM-MovieListings", position: "bottom_left", // Default module config. defaults: { apiKey: 'xxxxxxxxxxxxxxxxxxxxxxxx', region: 'NL', language: 'en-EN', interface: 'poster', //'list', 'poster', 'detailed' includeMoviePlot: false, maxPlotLength: 198, header: 'Nu in de bioscoop', moviesPerPage: 0, refreshInterval: 1000 * 60 * 60 * 24, //Once a day baseUrl: 'https://api.themoviedb.org/3/movie/now_playing', animationSpeed: 2.5 * 1000, pageChangeInterval: 30 * 1000 } }, { disabled: false, module: 'MMM-NOAA', position: 'top_right', config: { apiKey: "xxxxxxxxxxxxxxxxxx", // https://www.wunderground.com/weather/api select the middle plan... useAir: true, // set to false if you do not want to use Air Quality Index airKey: "xxxxxxxxxxxxxx", // IF you want Air Quality Index pws: "xxxxxxxxxx", // go here to find your pws: https://www.wunderground.com/wundermap showClock: false, // Hides or shows clock dformat: false, // for M/D/YYYY format, false for D/M/YYYY format: "24", // 12 or 24 hour format.. will default to 12 hour if none selected. ampm: false, // to show AM and PM on Sunrise/Sunset time showGreet: true, // deafult is false - to show greeting under clock and above date name: "xxxxxxxx", // Your name showWind: true, showDate: false, showForecast: true, //show bottom 3 day forecast flash: true, //Today in forecast flashes halo showUV: true, //show UV index showBar: true, // show Barometer showHum: true, //show Humidity level position: 'top_right', //whatever you have in above position must also be here alert: true //show weather alerts default is true } }, { module: 'MMM-Formula1', position: 'top_right', header: 'Formule 1 Classificatie', config: { maxRows: 6, season: 'current', calendar: true, fade: false, fadePoint: 0.2, grayscale: false, // Optional configuration options - see https://github.com/ianperrin/MMM-Formula1#configuration-options } }, { module: "MMM-ImagesPhotos", position: "bottom_right", header: "Onze reizen door xxxxxxxxxxxxxx .................", config: { opacity: 1, animationSpeed: 5000, updateInterval: 50000, maxWidth: "100%", maxHeight: "100%", } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "Algemeen Dagblad", url: "http://www.ad.nl/home/rss.xml" }, { title: "Telegraaf", url: "http://www.telegraaf.nl/rss/" }, { title: "Trouw", url: "https://www.trouw.nl/home/rss.xml" }, { title: "Volkskrant", url: "https://www.volkskrant.nl/nieuws-voorpagina/rss.xml" }, { title: "Nu.nl", url: "http://www.nu.nl/rss/Algemeen" } ], showSourceTitle: true, showPublishDate: true } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") {module.exports = config;}Thanks!
Peter -
Thats not what u promised ;)
You wanted to show your logs.
Your config is ok. Maybe its one of your modules. U have to try out by disabling them step by step or maybe in blocks.
Or try to run just default modules.
But first post your logs. i have been asking for it since the last 3 posts :D
-
@cruunnerr , shame on me, you are right!
This is my error log:/home/pi/.pm2/logs/MagicMirror-error-0.log last 15 lines: 0|MagicMir | npm ERR! 0|MagicMir | npm ERR! Failed at the magicmirror@2.2.2 start script 'sh run-start.sh'. 0|MagicMir | npm ERR! Make sure you have the latest version of node.js and npm installed. 0|MagicMir | npm ERR! If you do, this is most likely a problem with the magicmirror package, 0|MagicMir | npm ERR! not with npm itself. 0|MagicMir | npm ERR! Tell the author that this fails on your system: 0|MagicMir | npm ERR! sh run-start.sh 0|MagicMir | npm ERR! You can get information on how to open an issue for this project with: 0|MagicMir | npm ERR! npm bugs magicmirror 0|MagicMir | npm ERR! Or if that isn't available, you can get their info via: 0|MagicMir | npm ERR! npm owner ls magicmirror 0|MagicMir | npm ERR! There is likely additional logging output above. 0|MagicMir | 0|MagicMir | npm ERR! Please include the following file with any support request: 0|MagicMir | npm ERR! /home/pi/MagicMirror/npm-debug.logPeter
-
no need to shame ;)
i have had this problem, too.Since i played around with new modules and deleted other modules it doesn’t comes up again.
we discussed that issue already here
I can’t help u, but maybe it really helps if you would uncomment modules step by step (maybe two at the same time) and wait if the error comes up again.
I know, that will take a while, but for me it would be the choice how to solve it.
I have no other idea, i am sorry :(
-
@cruunnerr OK, I will follow your advice.
And what to do when I find the module that is causing the ploblem?
Delete it and install it again?
I love all the modules that I use now, so it would be bad not to have them.
Peter -
@Peter said in Something is wrong ....:
And what to do when I find the module that is causing the ploblem?
Create a new topic asking for help with that specific module that is causing problems. If the issue can be resolved then someone will help you. Or, tragically, if the issue can not be resolved, you may have to live without it. :-)
-
Maybe I found the problem; I think ImagePhotos caused the problem, but not the module but the pictures I used.
I had 70 high resolution holiday pictures roulating in the module and every now and then a picture had problems to load.
Some pictures were over 6mb.
I reseized a lot of pictures and am running over 2000 pictures now without problems (every picture is about 100kb).
Pictures are loading much smoother now.
Maybe this helps other people too!
Peter -
I am glad u found out what causes your problem :D
Yeah, the RPi is very limited in processor power. That is the reason, why some users went over to old laptops or small x86 solutions :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login