Something is wrong ....

Peter · Jan 16, 2018, 4:51 PM

I need some help: I own a Pi2 and a Pi3.
On both I can run MM.
MM is on two different sd cards (almost identical).
After a few hours running MM stops and restarts or MM freezes and does not restart.
I have the following modules:
Updatenotification
Systemtemperature
Moonphase
Watchdog
Clock
Calendar monthly
Calendar
Movielisting
NOAA
Formula1
Imagephotos
Newsfeed

It runs nice, so I think the config is ok.
Freezing or restarting happens with both the Pi2 as the Pi3, so I think it is not the hardware.
Where do I start troubleshooting (maybe the pictures in Imagephotos?)
Thanks.
Peter

retroflex · Jan 16, 2018, 4:58 PM

Is it the same as my error?
https://forum.magicmirror.builders/topic/6181/mirror-turning-black-after-a-while

I do not have restarts of freezes, but everything turning black though. Can you reach your mirror through SSH after a freeze?

Peter · Jan 16, 2018, 8:40 PM

@retroflex , I can reach my mirror after freezing with VNC.
But the Jessie GUI is also frozen; time has stopped …
So maybe the problem is Jessie?
I use normal Jessie, not lite.
Peter

Mykle1 · Jan 17, 2018, 1:25 PM

@Peter said in Something is wrong ....:

So maybe the problem is Jessie?

I doubt very much that the problem is Jessie. It’s the most stable OS for MM that I’ve found, aside from ubuntu. If there was a problem with the installation of Jessie then that would be another matter completely.

Have you tried running just the default modules to see if the problem still occurs?

Peter · Jan 17, 2018, 1:25 PM

@Mykle1 , thanks.
I think that is the only way: start with the default modules and the rest one by one until the problem occurs.
Peter

cruunnerr · Jan 17, 2018, 6:32 PM

Had/Have the same problem. I just copied all modules and the config of my main running RPi 3.
I set up a RPi 2 with the copied files just for experimental usage. When i run up both at the same time my RPi 3 stops after a few minutes or 1-2 hours and put these errors:

Tue Jan 16 2018 06:51:13 GMT+0100 (CET) - WatchDog: Heartbeat timeout. Frontend might have crashed. Exit now.
fatal: unable to access 'https://github.com/MichMich/MMM-WatchDog.git/': SSL connection timeout

fatal: unable to access 'https://github.com/vicmora/MMM-GoogleMapsTraffic.git/': SSL connection timeout

fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': SSL connection timeout

fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': SSL connection timeout

fatal: unable to access 'https://github.com/vicmora/MMM-GoogleMapsTraffic.git/': SSL connection timeout

fatal: unable to access 'https://github.com/Jopyth/MMM-Buttons.git/': SSL connection timeout

fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': SSL connection timeout

fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': SSL connection timeout

fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': SSL connection timeout

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': SSL connection timeout

fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': SSL connection timeout

fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': SSL connection timeout

fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': SSL connection timeout

fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': SSL connection timeout

fatal: unable to access 'https://github.com/MichMich/MMM-WatchDog.git/': SSL connection timeout

fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': SSL connection timeout

fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': SSL connection timeout

fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': SSL connection timeout

fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': SSL connection timeout

fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': SSL connection timeout

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': SSL connection timeout

fatal: unable to access 'https://github.com/MichMich/MagicMirror/': SSL connection timeout

fatal: unable to access 'https://github.com/Jopyth/MMM-Buttons.git/': SSL connection timeout

fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': SSL connection timeout

fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': Couldn't connect to server

fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': Couldn't connect to server

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/MichMich/MagicMirror/': Couldn't connect to server

fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': Couldn't connect to server

fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': Couldn't connect to server

fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': Couldn't connect to server

fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/MichMich/MagicMirror/': Couldn't connect to server

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': Couldn't connect to server

fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': Couldn't connect to server

fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': Couldn't connect to server

fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': Couldn't connect to server

Even if i run just the modules without an API the problem comes up. Don’t know why yet

cruunnerr · Jan 18, 2018, 9:45 PM

@Peter

Lets write here, so the other thread would not be filled up with this problem ;)

so u don’t know how it starts. That sound like u used the automatic installer and clicked “YES” when it asked u to start automatically.

Please type in console:

pm2 status
U will see a process name (probably “MagicMirror”)

now u can use
pm2 start MagicMirror to start MM
pm2 stop MagicMirror to stop MM
pm2 restart MagicMirror to restart MM

or even
pm2 logs MagicMirror to see logs and errors. Please try if i am right and then post the error log here

Peter · Jan 18, 2018, 9:53 PM

@cruunnerr after typing pm2 status I see two processes:
MagicMirror online
mm. stopped

after typing pm2 stop MagicMirror both processes are stopped.
Peter

cruunnerr · Jan 18, 2018, 10:03 PM

alright. so u used the automatic installer AND did the “how to autostart”-Tutorial from MichMich, too ^^

no problem, we will try to fix. As u can read here, ninjabreadman wrote how to remove one of the instances.

so please try:

cd
pm2 stop mm && pm2 delete mm && pm2 save
rm mm.sh

now there should just be the “MagicMirror” process even when u reboot.

Better now, to erase all logs and wait, if your problems come up again. So type:

pm2 flush

Next time u got any problems, please type:
pm2 logs MagicMirror
and post it here

Hope that will help ;)

Peter · Jan 18, 2018, 10:14 PM

Thanks!
Great help!
I hope this helps.
Next time I will post my error logs here.
peter