DHT22 Sensor

Bangee

Where will I need to install node-dht-sensor using it with MagicMirror?

a: ~/MagicMirror/ folder
b: ~/MagicMirror/modules/ folder
c: ~/MagicMirror/modules/MMM-Temperature/ folder

using this command: npm install node-dht-sensor

I would like to use it in node_helper.js inside a new module.

Thanks!

strawberry 3.141

@Bangee go into the directory of your new module e.g. ~/MagicMirror/modules/MMM-Temperature/ and type npm init and follow the instructions, after that type npm install --save node-dht-sensor

Bangee

@strawberry-3-141 thank you! that worked for me.
But now i’ve got this error:

mm-0 App threw an error during load
mm-0 Error: Module version mismatch. Expected 49, got 48.
mm-0     at Error (native)
mm-0     at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:167:20)
mm-0     at Object.Module._extensions..node (module.js:568:18)
mm-0     at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:167:20)
mm-0     at Module.load (module.js:458:32)
mm-0     at tryModuleLoad (module.js:417:12)
mm-0     at Function.Module._load (module.js:409:3)
mm-0     at Module.require (module.js:468:17)
mm-0     at require (internal/module.js:20:19)
mm-0     at Object.<anonymous> (/home/pi/MagicMirror/modules/temperature/node_helper.js:2:17)
mm-0 Whoops! There was an uncaught exception...
mm-0 Error: Module version mismatch. Expected 49, got 48.
mm-0     at Error (native)
mm-0     at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:167:20)
mm-0     at Object.Module._extensions..node (module.js:568:18)
mm-0     at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:167:20)
mm-0     at Module.load (module.js:458:32)
mm-0     at tryModuleLoad (module.js:417:12)
mm-0     at Function.Module._load (module.js:409:3)
mm-0     at Module.require (module.js:468:17)
mm-0     at require (internal/module.js:20:19)
mm-0     at Object.<anonymous> (/home/pi/MagicMirror/modules/temperature/node_helper.js:2:17)
mm-0 MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
mm-0 If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
mm-0 Launching application.

On line 2:

var sensorLib = require("node-dht-sensor");

Node Version

pi@raspberrypi:~/MagicMirror/modules $ node -v
v6.3.1

strawberry 3.141

@Bangee depending on your other post about this problem in a different thread I assume you have a newer node version installed as you had on your old sd card, so maybe this will help you https://docs.npmjs.com/cli/rebuild

Bangee

@strawberry-3-141 I’ve tried this before, but did not work for me. I’ve also made a reboot.

Will i need to have a downgrade?

strawberry 3.141

@Bangee never had such an issue before, did a clean install instead of copying images on sdcard, is there a reason why you copied an old image?

Bangee

ah no, I’ve made a new installation on a brand new sd card.
I moved my own moduls. the temperature module is a new one.

But I’ve got the same with @paviro PIR moudle… :-(

strawberry 3.141

did you copy all the node_modules directories? if so this is propably the issue go to the module remove the directories and run npm install

Bangee

No, I’ve installed the node_modules with npm install.

https://github.com/paviro/MMM-PIR-Sensor/issues/9

strawberry 3.141

then I have no clue sry