MMM-xiaomi - Temperature and Humidity from your smarthome

mirko3000

Hi, sorry I did not reply to your last comment, did you solve the issues there?
About the CSS: basically you are at the right spot, adjusting these values (e.g. font-size) should change font size. What did you edit exactly? Did you try restarting MM after the changes?

blinky1989dk

This post is deleted!

barnosch

@blinky1989dk said in MMM-xiaomi - Temperature and Humidity from your smarthome:

to my config file. that’s fine, but it can not connect to the gateway. but as soon as I add more then it will be the case
so when i restart it does not start up :( what can i do? some have some bids

sorry i have no idea, what you try to say with that sentence.

blinky1989dk

@barnosch my config file works. but as soon as i add mmm.xiaomi to config. then my config file does not work anymore and my mirror does not start up

yawns

Your config looks a bit misconfigured. Please remove these lines.

	config: {
		// See 'Configuration options' for more information.
	}
	},

If this is still not working, then please paste your entire config.

blinky1989dk

@yawns is dot work. so i had try to send config fil to you on pb

yawns

/* Magic Mirror Config Sample

By Michael Teeuw http://michaelteeuw.nl
MIT Licensed.
*/
var config = {
zoom: 0.6,
port: 8080,
ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses.

language: "da",
timeFormat: 24,
units: "metric",

modules: [
	{
		module: "alert",
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: 'MMM-WunderGround',
		position: 'top_right',
		config: {
			apikey: 'xxxxxxxxxxxxxxxxxxxxxx', // private; don't share!
			pws: 'pws:IVEJLE2', //culemborg
			hourly: '1',
			fctext: '1',
			fcdaycount: "5",
			fcdaystart: "0",
			hourlyinterval: "3",
			hourlycount: "2",
			alerttime: 10000,
			alerttruncatestring: "english:",
			roundTmpDecs: 1,
			UseCardinals: 0,
			layout: "vertical",
			iconset: "novaco",
			sysstat: 0
		}
	},
	{
		module: "MMM-xiaomi",
		position: "bottom_left",
		header: "Temperature / Humidity", // This is optional
		config: {
			gatewayIP: "192.168.10.170",
			gatewayToken: "xxxxxxxxxxxxxxxxxxx",
			showwindow: true,
			showVentilation: false,
			minTemperature: true,
			maxHumidity: true,
			showlights: true,
			rooms: [
			{ name: "test", sortOrder: 30, devices: ["158d0001b911b9"] },
			],
		}
	},
	],
	};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Please try again. I don’t know which text editor you used, but it is very important to only use these around strings:

"
’

Do not use

‘
“
”

shgmongohh

@mirko3000
Yes, i solved the problem with the token.

to my css:
I add

.xm-xiaomi .small {
  font-size: 24px;
}

to get a bigger fonts.

I try to change the default colours e.g.

.xm-legend-temp {
  position: absolute;
  height: 100%;
  width: 3px;
  background-color: #FF1493;
  left: 9%;
  z-index: 0;

And I want to have bigger figueres for temperature and humidity

.xm-room-temp-humid {
   margin: 10px;
   
}

blinky1989dk

@yawns okay THX. I Will try

blinky1989dk

This post is deleted!

joseska

Hi… We have an error with door sensor. Not show icons on MM. I think that the config is ok

{
			module: 'MMM-xiaomi',
			position: 'bottom_left',
			header: 'Temperatura / Humedad',
			config: {
				gatewayIP: '192.168.1.103',
				gatewayToken: 'xxxxxxxxxxxx872e8bc25e415a7005a2',
				showWindow: true,
				showVentilation: true,
				showLights: false,
				audioNotifications: true,
				rooms: [
					{ name: 'Salon', sortOrder: 10, devices: ['158d0001f531bf', '158d00020258f4'] }
				]
			}
		},

any idea???
Thanks…

mirko3000

Hmm your config seems to be fine, make sure the IDs are ok, else it should work. Be aware that the icon only shows open window/doors, so if the door is closed you won’t see an icon.
I suppose the temperature sensor is working fine?

joseska

@mirko3000 Now Work… I don´t know why…
simply copy again the id (the same) and change showVentilation: false (don´t have outdoor sensor) and work…

sorry and thanks…

Smotx

HI,

Anyone know why MMM Xiaomi need aplay ?

Error: Cannot find module 'node-aplay'
    at Module._resolveFilename (module.js:543:15)
    at Function.Module._resolveFilename (/home/pi/MagicMirror/node_modules/electron/dist/resources/electron.asar/common/reset-search-paths.js:35:12)
    at Function.Module._load (module.js:473:25)
    at Module.require (module.js:586:17)
    at require (internal/module.js:11:18)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-xiaomi/node_helper.js:11:20)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-xiaomi/node_helper.js:140:3)
    at Module._compile (module.js:642:30)
    at Object.Module._extensions..js (module.js:653:10)
    at Module.load (module.js:561:32)
Whoops! There was an uncaught exception...

Thanks

Smotx

@mirko3000 said in MMM-xiaomi - Temperature and Humidity from your smarthome:

I just recieved my order of another 6 window sensors yesterday :) But I really think they will shut this down soon, guess they (gearbest) are not paying any taxes at all…

Working on the new version, this is what I have in mind:

How to have this screen ?

Smotx

This post is deleted!

Smotx

it seems that these window sensors are not compatible.

Xiaomi Aqara Window Door Sensor

I added them to the config module and no return on MM.

When i launch

miio discover

it found

Device ID: 158d0001ab1f9c
Model info: lumi.magnet.aq2

but when i launch npm start, MMM-xiaomi say

Found device with ID 158d0001ab1f9c of type generic

and no

Found device with ID 158d0001ab1f9c of type magnet

Smotx

Thanks to owner of module : @mirko3000 for update to see this sensor !

Now that’s work

VagelisAn

Dear @mirko3000 i have follow your instraction and i install the MMM-Xiaomi, i install and the miio to get the access token but the scan of miio is not find the getaway accesstoken

pi@raspberrypi:~ $ miio discover
 INFO  Discovering devices. Press Ctrl+C to stop.

Device ID: 631XXXXX
Model info: Unknown
Address: XXX.XXX.X.XXX
Token: ???
Support: Unknown

I use the MI application and get the ip and accessToken and the id from temperature sensor.
The name is lumi.158xxxxxxxxxxx
this is the code of config

module: 'MMM-xiaomi',
		position: 'top_right',
		header: 'Temperature / Humidity',  // This is optional
		config: {
			config: {
			gatewayIP: 'IP getaway from MI home',
			gatewayToken: 'accese getaway from MI home',
			showWindow: true,
			showVentilation: true,
			showLights: false,
			audioNotifications: true,
			rooms:  [
				{
					name: 'Bedroom-Mi Temp',
					sortOrder: 10,
					devices : ['lumi.158xxxxxxxxxxx']
				},
					]
					}
		}

I execute and i have this error in terminal andthe xiaomi modules say connecting to xiaommi getaway.

{ Error: Call to device timed out
    at retry (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/devi             ce.js:225:18)
    at _ensureToken.catch.err (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modu             les/miio/lib/device.js:238:8)
    at <anonymous> code: 'timeout' }

Sorry if my English is bad

gh057

Has anyone tried to get the module to work with a Gateway AND a Yeelight bed lamp ??

I mean i have the module working with my gateway (manually added the token, and then the sensors appeard in miio discovery) but i havent managed to get it to work with the yeelight lamp (that also acts as a bluetooth gateway for my other sensors).

When i reseted the lamp, and connected to its wifi, i discovered it with miio and extracted the token, but later when i registered the lamp with the mi app, and connected my pi to my wifi, while the lamp is pingable by the pi, now miio doesn’t discover it!!

But, besides that, even if i manage to discover the lamp again with miio, i’m not aware if its even possible to add a second gateway to the module.

Does anyone know??