MMM-Domiticz

[jaminben]

Hi Charley,

I’m a newbie to MM so excuse me if the answer is obvious… the temperature and humidity work correctly but is there a way to display one after the other for the same sensor… so in my example screenshot you can see it lists all the temperatures first and then the humidity readings.

Anyway, many thanks for creating the module… it’s fantastic :)

[Charley]

@jaminben Thanks for the thank you, i am still working on it to make it better.

You can add more in your config.js settings

      showItems: ['temperature','energy','battery','co', 'blinds','humidity','baro'],   // possible items  temperature, energy, battery, co, blinds, humidity,  baro

Could you please reply with your config settings for this module .(delete any personal information ip,username or password)

I think I misread your question, however all sensors data are grouped in the newest version.

[jaminben]

@Charley said in MMM-Domiticz:

@jaminben Thanks for the thank you, i am still working on it to make it better.

You can add more in your config.js settings

      showItems: ['temperature','energy','battery','co', 'blinds','humidity','baro'],   // possible items  temperature, energy, battery, co, blinds, humidity,  baro

Could you please reply with your config settings for this module .(delete any personal information ip,username or password)

I think I misread your question, however all sensors data are grouped in the newest version.

@Charley

My config.js file…

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: ******,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1", "********"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "*******",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check-o ",
						url: "********"
					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "*******",
				locationID: "*****",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "******"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "********",
				locationID: "*******",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "*****"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "BBC News",
						url: "http://feeds.bbci.co.uk/news/uk/rss.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
			module: "MMM-Domoticz",
			position: "top_right",   // see mirror setting for options
			config: {          
				updateInterval: 45, // every 45 seconds
				apiBase: '******',
				apiPort: ****,
				apiUser: "*******",
					apiPw: "********",
				temperatureTitle: "Current House Temperatures",
				moduleTitle: "My smart home by Domoticz",
				energyTitle: "Energy used by",
				batteryTitle: "Battery level",
				coTitle: "CO2 level",
				blindsTitle: "Blinds",
				energyNow: "Currently",
				energyTotal: "Energy used",
				batteryThreshold: 20,
						coThreshold: 650,
				subMenus: true,
				showItems: ['temperature'],   // possible items  temperature, energy
				excludedDevices: ['none','add your own']  // Device that will not be shown
			}
		},
		{
			module: 'MMM-Todoist',
			position: 'top_right',	// This can be any of the regions. Best results in left or right regions.
			header: 'Todoist', // This is optional
			config: { // See 'Configuration options' for more information.
				accessToken: '********',
				maximumEntries: 60,
				updateInterval: 10*60*1000, // Update every 10 minutes
				projects: [ 166564794 ],
				fade: false
		  }
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

What I was trying to was something like:

Garden 24.1 (temperature)
55% (humidity)
Lounge 20.2 (temperature)
45% (humidity)
Garage 22.1 (temperature)
48% (humidity)

Rather than:

Garden 24.1 (temperature)
Lounge 20.2 (temperature)
Garage 22.1 (temperature)
Garden 55% (humidity)
Lounge 45% (humidity)
Garage 48% (humidity)

[jaminben]

@Charley

I just updated to the new version and it only shows the temperature now… not sure if that was intended or not.

[Charley]

You need to add humidity and baro to the showItems part in config.js
to see all options (someone asked in PM to block humidity)

 showItems: ['temperature','energy','battery','co', 'blinds','humidity','baro']

It will now show the way you like it

[jaminben]

@Charley

Very cool… can I make one suggestion? How about if it detects that it already has a name present for the temperature it doesn’t display the name for the humidity and/or baro just the value? That way you don’t get duplicate names for the same sensor.

I can see in yours you have Woonkamer (Living Room) repeated 3 times which I assume is the same sensor?

[Charley]

Yes they are all the same sensor. I will try in the coming days if I am able to get those properly.

Just made it. if you pull the upgrade it is there

[jaminben]

@Charley said in MMM-Domiticz:

Yes they are all the same sensor. I will try in the coming days if I am able to get those properly.

Just made it. if you pull the upgrade it is there

Very nice… it works as expected :)

Next request… is there a way to sort them some how?

Sorry, I know I’m a PITA.

[jaminben]

@Charley

Ah, no… ignore my last comment. I can sort them via my Domoticz Dashboard.

Once again, MANY THANKS… I really appreciate the work you’ve done.

Very Cool Stuff.

[Charley]

@jaminben

I already tried before to reorder the data. In the description of API/JSON for Domoticz it says you can order by Name. (Line 37 in my code)

That is the documentation, but in reality you can’t order anything. If I look in the json coming from the request file there are no objects that would follow the order in your webapplication.

It could be done my making an array where all sensors are switches are in, but it would be a hassle if you add a new device you would also need to add to your modules config.

Lets wait what the next version of Domoticz brings and if I am able to implement it.