Weather module not getting shown

[MichaelS]

hier ist meine config Datei

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "de",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_right"
		},
		
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_left",
			config: {
				location: "***",
				locationID: "****",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "****"
			}
		},
		{
			module: "weatherforecast",
			position: "top_left",
			header: "Weather Forecast",
			config: {
				location: "***",
				locationID: "***",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "****"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "aktuelle Nachrichten",
						url: "https://www.bild.de/rss-feeds/rss-16725492,feed=news.bild.html"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
	]

};

[MadScientist]

I don’t really see anything wrong with your config. All other default modules are displayed? Did you rename the config.js.sample to config.js?

[idoodler]

You may take a look at the log. If you use pm2 you can just type pm2 restart MagicMirror && pm2 log MagicMirror, this will restart your MacigMirror and then echo out the log. You then can look for any error or warning messages.

[MichaelS]

Warum umbenennen?
Das habe ich nicht gemacht

[MadScientist]

@MichaelS The config.js.sample is only a sample file. You have to rename it by removing the sample part in the end. But you most likely did already, otherwise the mirror would ask you to create a config file.

Are the other modules showing?

[sek_is_back]

@MichaelS said in Wetter wird nicht angezigt:

Warum umbenennen?

because the Mainprogram looks for a file named config.js without this file it dontn know what to display

[MichaelS]

Uhrzeit, News und Sprüche werden angezeigt.
Wetter nach wie vor nicht.

[sek_is_back]

@MichaelS said in Wetter wird nicht angezigt:

module: “currentweather”,

heißt das Modul currentweather? oder MMM-Wounderground?
unter Modul muss der Name des Moduls stehen der gleich mit dem Name des Ordners ist

[MadScientist]

@sek_is_back said in Wetter wird nicht angezigt:

@MichaelS said in Wetter wird nicht angezigt:

module: “currentweather”,

heißt das Modul currentweather? oder MMM-Wounderground?
unter Modul muss der Name des Moduls stehen der gleich mit dem Name des Ordners ist

Das default Modul heisst currentweather. Soweit ist alles richtig.
MicharlS: hast du mal gemacht, was idoodler gesagt hat? Logs könnten weiterhelfen.

[Albert2002]

There is no location in your config, or did you replaced the location with the *** ?

Da ist keine location in deiner config angegeben, es sei denn, du hast die id durch die *** ersetzt.

[MichaelS]

@idoodler said in Wetter wird nicht angezigt:

pm2 restart MagicMirror && pm2 log MagicMirror

Hier bekomme ich nur eine Fehlermeldung: Kommando nicht gefunden

pi@Door:~/MagicMirror $ npm start

> magicmirror@2.3.1 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.3.1
Loading config ...
Loading module helpers ...
No helper found for module: alert.
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: clock.
No helper found for module: compliments.
No helper found for module: currentweather.
No helper found for module: weatherforecast.
Initializing new module helper ...
Module helper loaded: newsfeed
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Connecting socket for: newsfeed
Starting module: newsfeed
Sockets connected & modules started ...
Launching application.
Create new news fetcher for url: https://www.bild.de/rss-feeds/rss-16725492,feed=news.bild.html - Interval: 300000
Shutting down server...
Stopping module helper: updatenotification
Stopping module helper: newsfeed
pi@Door:~/MagicMirror $ pm2 restart MagicMirror && pm2 log MagicMirror
bash: pm2: Kommando nicht gefunden.
pi@Door:~/MagicMirror $ 

Ist es normal das die Helper Module nicht gefunden werden?

[paviro]

This is an English forum. Please try to stick to English!

[idoodler]

@michaels It looks like you don’t use pm2 to run MagicMirror.

How did you install MagicMirror, did you use the automatic installation?