Weather module not getting shown

[MadScientist]

(Ich mach das hier mal auf englisch, damit du deine Chancen erhöhst, dein Problem zu lösen.)

It’s probably best to share your config with us. Just remember to remove anything you don’t want to share (e.g. API keys, maybe location etc.).

[MichaelS]

hier ist meine config Datei

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "de",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_right"
		},
		
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_left",
			config: {
				location: "***",
				locationID: "****",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "****"
			}
		},
		{
			module: "weatherforecast",
			position: "top_left",
			header: "Weather Forecast",
			config: {
				location: "***",
				locationID: "***",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "****"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "aktuelle Nachrichten",
						url: "https://www.bild.de/rss-feeds/rss-16725492,feed=news.bild.html"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
	]

};

[MadScientist]

I don’t really see anything wrong with your config. All other default modules are displayed? Did you rename the config.js.sample to config.js?

[idoodler]

You may take a look at the log. If you use pm2 you can just type pm2 restart MagicMirror && pm2 log MagicMirror, this will restart your MacigMirror and then echo out the log. You then can look for any error or warning messages.

[MichaelS]

Warum umbenennen?
Das habe ich nicht gemacht

[MadScientist]

@MichaelS The config.js.sample is only a sample file. You have to rename it by removing the sample part in the end. But you most likely did already, otherwise the mirror would ask you to create a config file.

Are the other modules showing?

[sek_is_back]

@MichaelS said in Wetter wird nicht angezigt:

Warum umbenennen?

because the Mainprogram looks for a file named config.js without this file it dontn know what to display

[MichaelS]

Uhrzeit, News und Sprüche werden angezeigt.
Wetter nach wie vor nicht.

[sek_is_back]

@MichaelS said in Wetter wird nicht angezigt:

module: “currentweather”,

heißt das Modul currentweather? oder MMM-Wounderground?
unter Modul muss der Name des Moduls stehen der gleich mit dem Name des Ordners ist

[MadScientist]

@sek_is_back said in Wetter wird nicht angezigt:

@MichaelS said in Wetter wird nicht angezigt:

module: “currentweather”,

heißt das Modul currentweather? oder MMM-Wounderground?
unter Modul muss der Name des Moduls stehen der gleich mit dem Name des Ordners ist

Das default Modul heisst currentweather. Soweit ist alles richtig.
MicharlS: hast du mal gemacht, was idoodler gesagt hat? Logs könnten weiterhelfen.

[Albert2002]

There is no location in your config, or did you replaced the location with the *** ?

Da ist keine location in deiner config angegeben, es sei denn, du hast die id durch die *** ersetzt.

[MichaelS]

@idoodler said in Wetter wird nicht angezigt:

pm2 restart MagicMirror && pm2 log MagicMirror

Hier bekomme ich nur eine Fehlermeldung: Kommando nicht gefunden

pi@Door:~/MagicMirror $ npm start

> magicmirror@2.3.1 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.3.1
Loading config ...
Loading module helpers ...
No helper found for module: alert.
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: clock.
No helper found for module: compliments.
No helper found for module: currentweather.
No helper found for module: weatherforecast.
Initializing new module helper ...
Module helper loaded: newsfeed
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Connecting socket for: newsfeed
Starting module: newsfeed
Sockets connected & modules started ...
Launching application.
Create new news fetcher for url: https://www.bild.de/rss-feeds/rss-16725492,feed=news.bild.html - Interval: 300000
Shutting down server...
Stopping module helper: updatenotification
Stopping module helper: newsfeed
pi@Door:~/MagicMirror $ pm2 restart MagicMirror && pm2 log MagicMirror
bash: pm2: Kommando nicht gefunden.
pi@Door:~/MagicMirror $ 

Ist es normal das die Helper Module nicht gefunden werden?

[paviro]

This is an English forum. Please try to stick to English!

[idoodler]

@michaels It looks like you don’t use pm2 to run MagicMirror.

How did you install MagicMirror, did you use the automatic installation?