HMDI (from Pi 3) to DVI? Will it work?

nbrenn

Will the HANNspree HF225DPB monitor work for the Magic Mirror application?

It doesn’t have an HDMI input, but could I just use an HDMI to DVI cable to connect the Pi 3 to the monitor?

Thanks!

MichMich

Yes, I do the same on my development monitor.

zam

@nbrenn it’s working for me … i used a monitor which don’t have HDMI port so i connected with a HDMI to DVI converter only issue is the sound wont output trough HDMI you need to use something else :) Good Luck

loribeeinca

that’s what I am doing. I was using an adapter for initial testing, then I bought a HDMI to DVD cable from amazon for the final build. Works just fine

McSorley

I have a DVI right angle adapter with a DVI to HDMI Cable.

indigomejor

Hi, will work VGA cable with HDMI adapter? Thank you very much!

McSorley

Dont get a straight VGA to HDMI cable because it wouldnt work. You would need convertor which is a bit larger than you would expect and often need to be powered.

yawns

Right, you need an active HDMI-VGA converter.

You could go for this: https://thepihut.com/products/raspberry-pi-hdmi-to-vga-convertor
However the “chain” looks a bit ugly (second image) and I could imagine it is a bit unsteady.

Or you go for this: https://www.pi-supply.com/product/gert-vga-666-hardware-vga-raspberry-pi/
However this blocks almost all GPIO ports and you need to solder it on your own, as it is a kit

indigomejor

@McSorley @yawns thank you guys! The blue one looks exactly like something I discovered in my local shop, so it’s solved, thank you!

bibi

in the same idea an adaptor display port > hdmi would also work no? anyone has tried this ?