Read the statement by Michael Teeuw here.
Besides your MagicMirror, what are some Maker-projects you worked/working on?
-
This is going to be my next project.
GameBoy Zero!
-
waaah <3 that gamebooy :D i want to make an N64 out of a pi soon
-
As if I don’t already have a bunch of stuff on my plate, yesterday someone asked me to re-make this for them:
https://www.youtube.com/watch?v=r8PtwqRvVDUAfter calculating all 148 parts, it comes out to 135 hours of printing (24 hours a day, non-stop), $60 worth of material, about 175 meters of it. If I were to print it at high quality, it’s 190 hours of printing (24 hours a day, non-stop.)
Then you need to add 20 minutes of cooling time between prints (the print bed has to cool down before you can remove the parts), set up time, the assumption that there will be not a single failed print job, assembly time, machine time, and that pesky electric bill.
A Life? Cool! Where can I download one of those from?
-
The above post on Arcus … it’s being printed. Some of the pieces, when printed all at once, take 30+ hours.
In the mean time, this “rolled off of the assembly line” today:
-
I don’t have pictures but have been working on a PI radio for my car… I had to take the software and port it over from German to English… I did and a few other people are using it LOL Mine’s not ready yet…
Got a 3d printer to make some parts but I’m a contractor and working on this stuff in the summer is too hard… I’m too busy so it’s winter work… :)
-
@KirAsh4
so you designed, 3dprinted and built a one-hand-minirailgun driven by rubber bands? That’s crazy but awesome! -
@yawns said in Besides your MagicMirror, what are some Maker-projects you worked/working on?:
@KirAsh4
so you designed, 3dprinted and built a one-hand-minirailgun driven by rubber bands? That’s crazy but awesome!No I have not. The design is by that person in the video, Matthew Davis. I’m simply printing and assembling it for myself. I did however (re)designed the laser cut vehicle, laser cut, and assembled the thing. It’s sitting on my living room table right now, awaiting some minor changes.
-
I built a HomeKit garage door opener with sensor …
'Hey Siri, open the garage door"
-
@loribeeinca said in Besides your MagicMirror, what are some Maker-projects you worked/working on?:
I built a HomeKit garage door opener with sensor …
'Hey Siri, open the garage door"
Siri, “Sorry HAL, that is not your car. I will not open the garage door.”
-
@KirAsh4 said in Besides your MagicMirror, what are some Maker-projects you worked/working on?:
@loribeeinca said in Besides your MagicMirror, what are some Maker-projects you worked/working on?:
I built a HomeKit garage door opener with sensor …
'Hey Siri, open the garage door"
Siri, “Sorry HAL, that is not your car. I will not open the garage door.”
I was tempted to call it “Pod Bay Doors” in HAP
-
@loribeeinca, how about “force field” ?
-
@KirAsh4 Siri! Lower the force field!
-
Well it would appear as though I’m also making a clock… yeah I said it… boring old clock LOL
BUT I’m going to use an RPI Zero 1.3 and run a minimal run of MM2 on it using a 7" touchscreen… you know off/snooze thing ;)
So I’ll keep you all informed… I just ordered a HubPiWi 1.3 :)
-
@cowboysdude said in Besides your MagicMirror, what are some Maker-projects you worked/working on?:
BUT I’m going to use an RPI Zero 1.3 and run a minimal run of MM2 on it using a 7" touchscreen… you know off/snooze thing ;)
Don’t expect Electron to run on that. It’s not compiled for that platform last I checked.
-
@McSorley said in Besides your MagicMirror, what are some Maker-projects you worked/working on?:
@KirAsh4 Siri! Lower the force field!
Unfortunately, unless the garage door goes down, instead of up, telling Siri to ‘lower’ it doesn’t seem right.
-
@loribeeinca Nice, which software did you use to connect your door to siri? Homebridge?
-
@MichMich . hi, yes. it was the HAP-NodeJS stuff that I used.
-
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login