MMM-Rest

Tuxdiver

@balthaz Config looks good. Strange…

I will add some debugging messages to the code later to make it easier to find the problem.

OK, I added some debugging code. Please pull the current version and set

debug: true;

to the modules config section.

I’m not sure, which is the best way to debug the version on the Raspi, but I think you could simply use a browser and connect to the Raspi. Maybe the console.log messages will be visible somewhere when using the electron app, but I don’t know where…

strawberry 3.141

@Tuxdiver you can open the console in electron with cmd+shift+I or start the mirror with npm start dev, then the console will be open from start

balthaz

@Tuxdiver
I add debug mode, but where can i find the log ?

I try a tcpdump, and they arre no connection to the url :

pi@mirror:~/MagicMirror/modules/MMM-Rest $ sudo tcpdump |grep dirk
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on wlan0, link-type EN10MB (Ethernet), capture size 262144 bytes

Stay in loading mode
Thanks in advance

Tuxdiver

@balthaz Sorry for the delay… The problem is the same-origin-policy of JavaScript: you must not call any other server than the one, where the mirror is running.

I will change the module to use a node helper, but that might take some time.

Tuxdiver

@Tuxdiver said in MMM-Rest:

@balthaz Sorry for the delay… The problem is the same-origin-policy of JavaScript: you must not call any other server than the one, where the mirror is running.

I will change the module to use a node helper, but that might take some time.

Module is updated on Github. Please try again. Now it uses a node_helper.js to fetch the remote data. Should solve the security “bug” of AJAX…

Jopyth

@Tuxdiver What kind of sensors are you using for this internally (your openHAB)?

balthaz

Hello,
I am currently on vacation, I will try on my return.
Thanks

Tuxdiver

@Jopyth said in MMM-Rest:

@Tuxdiver What kind of sensors are you using for this internally (your openHAB)?

I have an ESP8266 / NodeMCU sensors in every room, which send temperate and humidity values via MQTT to the mirror running mosquitto MQTT broker and openHAB. The values from the openHAB - API are then displayed on the mirror using my module.

balthaz

@Tuxdiver Yes it’s working good now :)
Is it possible to display alphanumeric response?

Thanks

Tuxdiver

@balthaz Please have a look at the last version on Github :-)

Attention: it has an incompatible change of the config parameters - see README.md!