Rss for news feeds?

bhepler

Try this for a Google news url: https://news.google.com/news?cf=all&hl=en&pz=1&ned=us&output=rss

strawberry 3.141

@deadherring you must have just used the wrong syntax i tested a couple and they all worked for me, make sure you only use one of those two quotes ' or " another will lead to wrong syntax

https://imgur.com/a/cQ0lN

deadherring

Hey guys,

Thanks a lot for the responses. Here’s what I think might be happening:

The first three I configured that I got working

title: “ESPN”,
url: “http://www.espn.com/espn/rss/news”

and one from CNN, I configured on the pi itself, modifying the config file with a mouse and keyboard on the pi. The rest that I shared that weren’t working, modified the config file on my mac via text edit and then ftp’d the file up to the pi. I suspect that the mac might be saving the file in a way the pi does not like, or, as was suggested, inputting the " s in a way the pi does not like. At least, that’s my theory right now, I need to test when I get home.

This is the procedure I am following to edit config.js on my mac:

Two-fingered click on config.js. Open with Text Edit
Modify the file
Save as: config.js. I leave the default plain text encoding (UTF-8)

Is that the right procedure? My MM is installed in the wall in my bathroom and it would be a huge pain to have to connect a mouse and keyboard to it every time I want to modify anything. I suppose I can ssh into it and modify the config file via nano too. I don’t know if that solves the problem, I have to try later.

Thanks again,

Nathan

KirAsh4

@deadherring said in Rss for news feeds?:

My MM is installed in the wall in my bathroom and it would be a huge pain to have to connect a mouse and keyboard to it every time I want to modify anything. I suppose I can ssh into it and modify the config file via nano too. I don’t know if that solves the problem, I have to try later.

Either use SSH to get on the rpi, or, if you must, get a wireless mouse/keyboard combo. Those things are cheap on eBay.

bhepler

@deadherring said in Rss for news feeds?:

and one from CNN, I configured on the pi itself, modifying the config file with a mouse and keyboard on the pi. The rest that I shared that weren’t working, modified the config file on my mac via text edit and then ftp’d the file up to the pi. I suspect that the mac might be saving the file in a way the pi does not like, or, as was suggested, inputting the " s in a way the pi does not like. At least, that’s my theory right now, I need to test when I get home.

I think you may be on to something here. Looking back at your complete list of feeds, this is what showed up from your copy & paste:

},

title: â€œJerusalem Postâ€
url: â€œhttp://www.jpost.com/Rss/RssFeedsFrontPage.aspxâ€
},

Now I don’t know about your Mac, but from here that looks like some unicode characters where there should be UTF-8. The quotes around Jerusalem Post and the URL value are jacked up. I think you’re better off SSH into the Pi and using nano to edit the config.js file.

deadherring

Hi,

I got this working, the problem was indeed something with the formatting by editing as a text file on my mac. By sshing into the box and modifying the config file directly on the pi I got it working.

One question I still have: is there any way to tell the box to drop headlines after 2 days or so? I’m seeing headlines that are 5, 6, 7, 8 days old cycle through and they are no longer news. I’m seeing some new headlines make their way in but the majority are old. I want to have the MM drop headlines when they are stale, say after 2 days time.

I see there is a updateInterval tag but I believe that refers to the frequency it checks for new headlines, not when it drops old headlines off. Anyone else having the same issue?

Thanks,

Nathan

safaaelbrans

This post is deleted!