Read the statement by Michael Teeuw here.
Can't clone from GitHub
-
@sdetweil said in Can't clone from GitHub:
typically less than 20 minutes
He’s on an RPI 1. That’s not typical.
-
@bhepler still won’t be bad… take 25 on my pi0
-
@bhepler For reference on why I’m sceptical, check my other thread from a few years back
-
@MMRPi1 its been a mess… the old installer didn’t work, and there are tons of old documents that people built 2-3 years ago, that are no mostly useless, but we can’t get rid of them.
i wanted the installer to be THE way to get it installed, by it takes a lot of work, and it was felt that was outside the MM project objectives… so they were removed in 2.11. armv6l devices pi 0, 1 and pi2 a are not supported (ie won’t run) unless some extra work is done… my script handles all that
-
@sdetweil Oh alright I guess. Well I guess I’ll image the SD, flash it, try again and hope for the best. Here goes
-
-
@MMRPi1 do you have another sd card available?
-
@sdetweil Don’t think so but I’ll look around.
-
@MMRPi1 ok, before you start, one thing… electron for the newer node levels is not available for armv6l devices anymore, so we run in split mode, serveronly and chrome-browser to view… takes a little longer to start up
-
@sdetweil I think I do that already. Not sure what split mode is though. Side note: I found an old SD, how much space do I need for the OS and MM and everything else?
-
@MMRPi1 i think 8 gig is too small
-
@sdetweil Cool /s All I’ve got is 4GB :/
-
@MMRPi1 - You should be fine with anything over 6 GB or so. The Buster with desktop image is 4 GB unpacked. You can free up more space by uninstalling libreoffice and some other stuff. Or just throw gigabytes at it.
-
@bhepler I’ve only got 4GB :/
-
There are three flavors of Buster on the downloads page. The full 4GB one is “Buster with desktop and recommended software”. You should be okay - barely - with the middle level: Buster with desktop
-
Haven’t done anything yet, but I tried to SSH in again and it’s gone back to not working.
(interrupted system call is the error I get on terminus) -
@MMRPi1 reboot the router and it comes back?
-
@sdetweil Do you mind if we try this again. I’ve seen many answers referencing recompiling git or something, but I’m getting a lot of errors. I thought maybe it would solve the issue if I did it correctly, which I’m clearly not.
I’ve attached a screenshot of the terminal because there are a lot of errors I don’t really understand, but maybe you guys could make sense of it.
It’s just I don’t have another SD card and I’d prefer not to flash my existing one.
(First command works fine, but it’s a bit cut off at the top) -
@sdetweil Also for the record SSH is back working (I DIDN’T restart the router), it seems a bit hit and miss but we’ll leave that for now
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login