MMM-HomeKit | Control your MagicMirror with Apple HomeKit

[Baassievalk]

Hi!

I need a little help setting it up…
When turning on the mirror in the HomeKit App I get the following log:

[2020-3-29 22:26:16] [Raspberry Pi] Mirror is off.
[2020-3-29 22:26:17] [Raspberry Pi] Failed to turn on Mirror
[2020-3-29 22:26:17] [Raspberry Pi] 
Als het goed is hebt u de gebruikelijke informatie ontvangen van uw
systeembeheerder. Gewoonlijk komt het neer op de volgende drie punten:

    1. Respecteer de privacy van anderen.
    2. Denk na voordat u iets doet.
    3. Veel mogelijkheden betekent veel verantwoordelijkheid.

sudo: geen terminal aanwezig en geen wachtwoordvraag(askpass)-programma opgegeven

Translated

[2020-3-29 22:26:16] [Raspberry Pi] Mirror is off.
[2020-3-29 22:26:17] [Raspberry Pi] Failed to turn on Mirror
[2020-3-29 22:26:17] [Raspberry Pi] 
"Als het goed is hebt u de gebruikelijke informatie ontvangen van uw
systeembeheerder. Gewoonlijk komt het neer op de volgende drie punten:

    1. Respecteer de privacy van anderen.
    2. Denk na voordat u iets doet.
    3. Veel mogelijkheden betekent veel verantwoordelijkheid." This is a little talk about privacy but then:
sudo: no terminal available and no  passwordask(askpass) programs gave up.

If anyone knows a solution, would be appreciated!

[NorthernMan54]

@Baassievalk
After much googling, the answer is here:

https://stackoverflow.com/questions/21659637/how-to-fix-sudo-no-tty-present-and-no-askpass-program-specified-error

and in particular this comment

username ALL = NOPASSWD: /fullpath/to/command, /fullpath/to/othercommand

In my setup I created a file called /etc/sudoers.d/010_cmdswitch2
And the file contains

homebrid ALL = NOPASSWD: /bin/chvt

chvt is the command I need to run, and homebrid is the account I use to run my homebridge with

[a0ies]

This post is deleted!

[amaralia]

@Caimin Bonjour a toi

Would it be possible for you to give me a hand,

I have homebridge on one raspberry and magic mirror on another.

i am using hdmi on the magic mirror.

I can’t understand why I have this error on the image

Yours

j’ai cette configuration

{
    "platform": "cmdSwitch2",
    "name": "Ecran Mirroir",
    "switches": [
        {
            "name": "magicmirror",
            "on_cmd": "curl -s 'http://192.168.1.2:8080/remote?action=MONITORON'",
            "off_cmd": "curl -s 'http://192.168.1.2:8080/remote?action=MONITOROFF'",
            "state_cmd": "sshpass -p 'Armagedon13' ssh -oStrictHostKeyChecking=no pi@192.168.1.2 vcgencmd display_power | grep -q 'HDMI DMT && echo '1'",
            "polling": true,
            "interval": 10,
            "manufacturer": "Raspberry Pi Foundation",
            "model": "Raspberry Pi 3 Model B"
        }
    ]
}

[sdetweil]

@amaralia said in MMM-HomeKit | Control your MagicMirror with Apple HomeKit:

grep -q 'HDMI DMT && echo ‘1’

seems u are missing a single quote (before the && )

[banbutcher]

Just installed homekit and its great… i can now have the mirror switch off when i say goodnight using shortcuts, i also have it set to turn off when im not there and switch on when i get home!

next step is to get it to switch on my playstation on voice! :)

[fragler]

Hello,
I am trying to setup a Mirror and make it work with homekit. I’m very unexperienced with coding and basically everything here :)
I followed the instructions and get the following error.
I would appreciate your help a lot!
Thank you in advance:

[11.12.2020, 17:48:04] Loading 2 platforms…
[11.12.2020, 17:48:04] [Config] Initializing config platform…
[11.12.2020, 17:48:04] [Config] Running in Service Mode
[11.12.2020, 17:48:04] [Raspberry Pi] Initializing cmdSwitch2 platform…
[11.12.2020, 17:48:04] Error: Cannot add a bridged Accessory with the same UUID as another bridged Accessory: 74adc578-9ce9-42de-bbbb-5e3d84a287a1
at Bridge.Accessory._this.addBridgedAccessory (/usr/lib/node_modules/homebridge/node_modules/hap-nodejs/src/lib/Accessory.ts:416:15)
at /usr/lib/node_modules/homebridge/src/server.ts:310:19
at Array.filter ()
at Server.restoreCachedPlatformAccessories (/usr/lib/node_modules/homebridge/src/server.ts:270:69)
at Server.start (/usr/lib/node_modules/homebridge/src/server.ts:158:10)
at cli (/usr/lib/node_modules/homebridge/src/cli.ts:80:10)
at Object. (/usr/lib/node_modules/homebridge/bin/homebridge:17:22)
at Module._compile (internal/modules/cjs/loader.js:1063:30)
at Object.Module._extensions…js (internal/modules/cjs/loader.js:1092:10)
at Module.load (internal/modules/cjs/loader.js:928:32)

[sdetweil]

@fragler said in MMM-HomeKit | Control your MagicMirror with Apple HomeKit:

: Cannot add a bridged Accessory with the same UUID as another bridged Accessory

[BKeyport]

@fragler
FYI, this non-module is a piece of abandonware.

Looks like you’ve got two devices using the same ID.

Do you have homebridge on your network already?

https://homebridge.io/ is the underlying software, and has moved past what this module had supported. I personally went to a smart plug instead. There’s too many problems with this module to set it up. Took me a solid 3 weeks of debugging to get this to work part of the time.

[fragler]

@BKeyport Yes I have homebridge online and running. But there is no other device I’m using with homebridge.

Okay if this module does not work well, then that’s another story.
The problem with the smart plug is that when I turn off the monitor (i.e. kill power) and turn power on again, I need to turn the monitor on with a button as well. So if I were to use a smart plug I could turn on power for the monitor but would still have to press a button :/
That’s why I thought this would be a great solution with this module…
But thank you all so much for your quick replies!!