MMM-Globe

[Foxy25]

It works perfect!!!

Thank you so much for you support!!!

Greetings from Germany

Foxy

[ashishtank]

@foxy25 you are welcome :)

[damith]

hi everyone, I’ve tried to install on my PI but it won’t work…am getting black screen, here is my config file… any HELP…?
modules: [

	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "Italy Holidays",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check",
					url: "webcal://www.calendarlabs.com/ical-calendar/ics/53/Italy_Holidays.ics"					}
			]
		}
	},
	{
		module: "compliments",
		position: "top_center"
	},
	{
		module: "weather",
		position: "top_right",
		config: {
			weatherProvider: "openweathermap",
			type: "current",
			location: "ROME",
			locationID: "3169070", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			apiKey: "492da6299f48937482d3c321215289b0"
		}
	},
	{
		module: "weather",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			weatherProvider: "openweathermap",
			type: "forecast",
			location: "ROME",
			locationID: "3169070", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			apiKey: "492da6299f48937482d3c321215289b0"
		}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "REPUBBLICA",
					url: "https://www.repubblica.it/rss/homepage/rss2.0.xml"
				}
			],
			showSourceTitle: true,
			showPublishDate: true,
			broadcastNewsFeeds: true,
			broadcastNewsUpdates: true
		}
	},
            {
	module: 'MMM-Globe',
	position: 'lower_third',	// This can be any of the regions. Best results in lower_third
	config: {
            size:"x-small", // Globe size. See configuration options below for more options
			dayLength: 38, // (Optional) Rotation speed. See configuration options below
		    viewAngle: 15, // (Optional) Globe tilt. See configuration options below.
			introLinesDuration: 2000,
			receiveExternalLocations: 0,
            locations: [
                // Fill with location Objects if desired
                // e.g.
                   {lat:37.77493,lng:-122.41942, label: "San Francisco"},
                   {lat:-23.5475,lng:-46.63611, label: "Sao Paulo"}

                // Individual values must be seperated by a comma.
                // You can look up the latitude and longitude for a specific location on Google Maps.
                    ]
                    }
            },
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

[thgmirror]

Hi @damith,

May be, you have an issue in the config.js.
You can use the built-in check-tool from within the MagicMirror folder named
npm run config:check

Or use an external Website (I use https://esprima.org/demo/validate.html) to see if it is valed.

Greetings from Germany
Thomas

[damith]

hi@thgmirror
Thank you very much for you reply, I’ve checked with built in check but no errors …!!

pi@raspberrypi:~/MagicMirror $ npm run config:check

magicmirror@2.15.0 config:check /home/pi/MagicMirror
node js/check_config.js

[02.05.2021 12:20.01.503] [INFO] Checking file… /home/pi/MagicMirror/config/config.js
[02.05.2021 12:20.01.719] [INFO] Your configuration file doesn’t contain syntax errors :)
pi@raspberrypi:~/MagicMirror $

[sdetweil]

@damith did u do the npm install in the module folder after git clone?

if u look at the startup messages, where u start mm
npm start
or pm2 logs --lines=100

you might see a message, module not found.
this is the number 1 clue you didn’t do the npm install

[damith]

hi @sdetweil

Thank you very much for your reply… you are the NUMBER ONE… it works fine… Thanks again.

i have done NPM INSTALL… its worked fine…:face_savoring_food: :face_savoring_food:

[damith]

hi guys… my GLOBE is woking fine… but there is a problem with City NAMES, i won’t display…, config is ok… can anyone help me …?

{
module: ‘MMM-Globe’,
position: ‘lower_third’, // This can be any of the regions. Best results in lower_third
config: {
size:“x-large”, // Globe size. See configuration options below for more options
dayLength: 38, // (Optional) Rotation speed. See configuration options below
viewAngle: 15, // (Optional) Globe tilt. See configuration options below.
introLinesDuration: 2000,
receiveExternalLocations: 0,
locations: [
// Fill with location Objects if desired
// e.g.
{lat:37.77493,lng:-122.41942, label:“San Francisco”},
{lat:7.58403,lng:80.78798, label:“Sri Lanka”},
{lat:-23.5475,lng:-46.63611, label:“Sao Paulo”}

                // Individual values must be seperated by a comma.
                // You can look up the latitude and longitude for a specific location on Google Maps.
                    ]
                    }
            },
]

[Foxy25]

HI

here is my working config:

Greetings Torsten

{
		module: 'MMM-Globe',
		position: 'fullscreen_below',	// This can be any of the regions. Best results in lower_third
		config: {
                size:"medium", // Globe size. See configuration options below for more options
                dayLength: 43, // (Optional) Rotation speed. See configuration options below
                viewAngle: 15, // (Optional) Globe tilt. See configuration options below.
                locations: [
                    // Fill with location Objects if desired
                    // e.g.
                    // {lat:37.77493,lng:-122.41942, label: "San Francisco"},
                    // {lat:-23.5475,lng:-46.63611, label: "Sao Paulo"}
                    // Individual values must be seperated by a comma. 
                    // You can look up the latitude and longitude for a specific location on Google Maps.

                    {lat:49.6294791,lng:7.8252699, label: "Rockenhausen" },
                    {lat:40.7223507,lng:-73.9901943, label: "New York" },
                    {lat:36.1047739,lng:-115.1421297, label: "Las Vegas" },
                    {lat:13.7544142,lng:100.5020575, label: "Bangkok" },

                ],
		},
	},

[hiro.nguyen]

Hi, may i ask if it is possible to change background to transparent ?
Thanks,