MMM-Globe

oli28

What a beautiful modul! Any chance to change the font size to be able to fit more destinations next to each others? I did try to find it in the .css but had no luck yet.

Foxy25

Hi,
I have a question about the module:

I would like to make the background transparent, is that possible? At the moment it is black.

That would help me, because I have a slideshow running in the background and the black background behind the globe doesn’t look so nice …

Would be very grateful if someone could help.

Foxy

Wenike

@foxy25 @foxy25 In your custom.css file, see if adding:

.globe { opacity: 0.0; }

Fixes the issue?

Foxy25

@wenike
Hi,

i use the command in the styles.css of the modul, not in the custom.css.

It works, but it makes the complete module invisible, not only the background behind the globe.

Thank you for your support.

ashishtank

@foxy25 to make globe transparent there are two changes required.

Module div’s background color
Globe canvas itself have black color as background.

First one can be easily doable with css but to make globe transparent you will need to change the code as well. Do below to make globe transperent.

In custom.css add below css

.globe
{
	background-color: unset;
}

in modules\MMM-Globe\encom-globe.js file find below line and change it to.

from

this.renderer = new THREE.WebGLRenderer( { antialias: true } );

to

this.renderer = new THREE.WebGLRenderer( { antialias: true, alpha: true } );

below is output

Before

After

Let me know how/if it works for you.

Foxy25

It works perfect!!!

Thank you so much for you support!!!

Greetings from Germany

Foxy

ashishtank

@foxy25 you are welcome :)

damith

hi everyone, I’ve tried to install on my PI but it won’t work…am getting black screen, here is my config file… any HELP…?
modules: [

	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "Italy Holidays",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check",
					url: "webcal://www.calendarlabs.com/ical-calendar/ics/53/Italy_Holidays.ics"					}
			]
		}
	},
	{
		module: "compliments",
		position: "top_center"
	},
	{
		module: "weather",
		position: "top_right",
		config: {
			weatherProvider: "openweathermap",
			type: "current",
			location: "ROME",
			locationID: "3169070", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			apiKey: "492da6299f48937482d3c321215289b0"
		}
	},
	{
		module: "weather",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			weatherProvider: "openweathermap",
			type: "forecast",
			location: "ROME",
			locationID: "3169070", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			apiKey: "492da6299f48937482d3c321215289b0"
		}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "REPUBBLICA",
					url: "https://www.repubblica.it/rss/homepage/rss2.0.xml"
				}
			],
			showSourceTitle: true,
			showPublishDate: true,
			broadcastNewsFeeds: true,
			broadcastNewsUpdates: true
		}
	},
            {
	module: 'MMM-Globe',
	position: 'lower_third',	// This can be any of the regions. Best results in lower_third
	config: {
            size:"x-small", // Globe size. See configuration options below for more options
			dayLength: 38, // (Optional) Rotation speed. See configuration options below
		    viewAngle: 15, // (Optional) Globe tilt. See configuration options below.
			introLinesDuration: 2000,
			receiveExternalLocations: 0,
            locations: [
                // Fill with location Objects if desired
                // e.g.
                   {lat:37.77493,lng:-122.41942, label: "San Francisco"},
                   {lat:-23.5475,lng:-46.63611, label: "Sao Paulo"}

                // Individual values must be seperated by a comma.
                // You can look up the latitude and longitude for a specific location on Google Maps.
                    ]
                    }
            },
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

thgmirror

Hi @damith,

May be, you have an issue in the config.js.
You can use the built-in check-tool from within the MagicMirror folder named
npm run config:check

Or use an external Website (I use https://esprima.org/demo/validate.html) to see if it is valed.

Greetings from Germany
Thomas

damith

hi@thgmirror
Thank you very much for you reply, I’ve checked with built in check but no errors …!!

pi@raspberrypi:~/MagicMirror $ npm run config:check

magicmirror@2.15.0 config:check /home/pi/MagicMirror
node js/check_config.js

[02.05.2021 12:20.01.503] [INFO] Checking file… /home/pi/MagicMirror/config/config.js
[02.05.2021 12:20.01.719] [INFO] Your configuration file doesn’t contain syntax errors :)
pi@raspberrypi:~/MagicMirror $

sdetweil

@damith did u do the npm install in the module folder after git clone?

if u look at the startup messages, where u start mm
npm start
or pm2 logs --lines=100

you might see a message, module not found.
this is the number 1 clue you didn’t do the npm install

damith

hi @sdetweil

Thank you very much for your reply… you are the NUMBER ONE… it works fine… Thanks again.

i have done NPM INSTALL… its worked fine…:face_savoring_food: :face_savoring_food:

damith

hi guys… my GLOBE is woking fine… but there is a problem with City NAMES, i won’t display…, config is ok… can anyone help me …?

{
module: ‘MMM-Globe’,
position: ‘lower_third’, // This can be any of the regions. Best results in lower_third
config: {
size:“x-large”, // Globe size. See configuration options below for more options
dayLength: 38, // (Optional) Rotation speed. See configuration options below
viewAngle: 15, // (Optional) Globe tilt. See configuration options below.
introLinesDuration: 2000,
receiveExternalLocations: 0,
locations: [
// Fill with location Objects if desired
// e.g.
{lat:37.77493,lng:-122.41942, label:“San Francisco”},
{lat:7.58403,lng:80.78798, label:“Sri Lanka”},
{lat:-23.5475,lng:-46.63611, label:“Sao Paulo”}

                // Individual values must be seperated by a comma.
                // You can look up the latitude and longitude for a specific location on Google Maps.
                    ]
                    }
            },
]

Foxy25

HI

here is my working config:

Greetings Torsten

{
		module: 'MMM-Globe',
		position: 'fullscreen_below',	// This can be any of the regions. Best results in lower_third
		config: {
                size:"medium", // Globe size. See configuration options below for more options
                dayLength: 43, // (Optional) Rotation speed. See configuration options below
                viewAngle: 15, // (Optional) Globe tilt. See configuration options below.
                locations: [
                    // Fill with location Objects if desired
                    // e.g.
                    // {lat:37.77493,lng:-122.41942, label: "San Francisco"},
                    // {lat:-23.5475,lng:-46.63611, label: "Sao Paulo"}
                    // Individual values must be seperated by a comma. 
                    // You can look up the latitude and longitude for a specific location on Google Maps.

                    {lat:49.6294791,lng:7.8252699, label: "Rockenhausen" },
                    {lat:40.7223507,lng:-73.9901943, label: "New York" },
                    {lat:36.1047739,lng:-115.1421297, label: "Las Vegas" },
                    {lat:13.7544142,lng:100.5020575, label: "Bangkok" },

                ],
		},
	},

hiro.nguyen

Hi, may i ask if it is possible to change background to transparent ?
Thanks,

greedyvegan

in the beginning of this post from 2021, it was recommended NOT to use this with a raspberry pi
today, in 2024, I have a raspberry pi 5, does that matter? lol

anyway, the left is on my pi 5 and the right is viewing it on a browser on my computer

Screenshot 2024-10-09 at 7.16.10 PM.png

is there an update on a lite version?

sdetweil

@hiro-nguyen sure, css

google search css transparent background

sdetweil

@greedyvegan you will need to enable the gpu in the system boot.txt

AND

tell MagicMirror electron to use it

export ELECTRON_ENABLE_GPU=1

in the script before

npm  start

if you used my script to install MagicMirror , that is ~/MagicMirror/installers/mm.sh

greedyvegan

@sdetweil

like this?
Screenshot 2024-10-10 at 5.49.34 PM.png

I got this error
[PM2][ERROR] File ecosystem.config.js not found

sdetweil

@greedyvegan that pm2 error is usually caused by using sudo sometime when you shouldn’t

what happened before that? is that the first time w pm2

maybe

pm2 status
pm2 delete xxx
where xxx is the name or number on the MagicMirror line

then run my fixuppm2 script

pm2 seems fragile recently. not sure why