Read the statement by Michael Teeuw here.
MMM-Domoticz-ext: interact with Domoticz
-
@goedh452 thanks fixed it by using the utility for actual usage so i don’t need it in the rooms layout.
Is it posible to implement my distance Dummy sensor into a utility gauge?
the sensor is receiving data in this format “Data” : “22.1 cm”,
I can also make a dummy counter and it will be “Counter” : "22.035 ",
If i try to add a gauge in the module it wont load. i think its because of the data provided by my IDX numbers. -
I think you are right why it is not loading. I’ll have a look at the multiple requests this weekend.
-
@goedh452 thanks,
Is it true that the gauges switch position? added 2 of them (electr. usagage and gas usage) is see them switch position sometimes when they update apart from each other.somehow my gass gauge updated and switched to the left side 10 sec later electr. gauge was updated and switched back to the left side.
Feature request
Would be nice to fix their position.
thanks allot for the module it looks Great!
-
This sometimes seems to happen indeed. I notices it as well. The different gauges aren’t always processed in the same order and that causes the switch of position. I have a look at this as well. It should be possible to always order them according to the order in the config.
-
I made some modifications to the code:
-
Fixed the switching positions of gauges (I think, it doesn’t happen to me a lot, so testing is a bit difficult)
-
Added ‘Custom gauges’. You can use every type of device to be displayed as a gauge as long as you specify the correct config settings (also see the readme).
My customGauge config is:
customGauges: { headerLabel: "Overige", showLabel: true, devices: [ { idx: "1356", deviceHeader: "Volt", lowerText: "Voltage", gaugeAppendText: "volt", gaugeMaxValue: 250, }, { idx: "2057", deviceHeader: "Afstand", gaugeAppendText: "cm", gaugeMaxValue: 1000, markerColor: "#70db70" } ] },This results in:
Please download the latest code from GitHub and give it a try! Let me know it you encounter any problems.
-
-
@goedh452
Thanks,
Works like a charm.
Will keep u posted if some errors show up.
-
@goedh452
Looking at my post is spotted some differances in the gauges. they were my mistakes :P -
Hi and thanks again for your efforts.
Gauge swapping positions
I can confirm that this occurs occasionally, on a manual browser refresh if seems to have a 15% chance of occurring. ( i did 30 refreshes. and got 2 swaps) i only see the last 2 gauges, out of the 5 that i have showing, do the swap.Custom Gauges
These work well and as expected. - thank you!
here is the config I am using:
{ module: "MMM-Domoticz-ext", //header: "Domoticz - new", //position: "bottom_left", position: "bottom_bar", config: { apiBase: "10.60.2.252", apiPort: "8080", //apiUser: "XXXX", // only works with domoticz "Setup|Settngs|Website protection = "Basic auth" add the MM Ip to the "Local Networks" list to allow access with no auth, then all sensors will be listed. //apihPW: "YYYY", //alwaysShowDashboard: true, horizontal: "true", columnCount: 3, displayType: "all", // show all switchs/lights status //displayType: "dashboard", // dashboard //dashboardColumnCount: 3, //switchIcon: "lightbulb", weather: { devices: [ "199", "200" ], //snake temps weatherLabel: "Temperatures", gaugeWidth: 200, gaugeWindAppendText: "km/h", rainSuffix: "mm", }, utilities: { utilityLabel: "Gas - Water - Elec", showLabel: false, devices: [ { idx: "164", deviceHeader: "Solar Gen", useHeaderSymbol: false, headerSymbol: "solar-panel", counterTodayLabel: "Today", gaugeMinValue: 0, gaugeMaxValue: 2000, gaugeAppendText: "Watts", gaugeWidth: 150, lineWidth: 12, markerWidth: 12, markerColor: "#F4D03F" }, { idx: "191", deviceHeader: "PowGen/PowUse", useHeaderSymbol: false, headerSymbol: "solar-panel", counterTodayLabel: "Today", gaugeMinValue: -2000, gaugeMaxValue: 2000, gaugeAppendText: "Watts", gaugeWidth: 150, lineWidth: 12, markerWidth: 12, markerColor: "#F4003F" }, ], }, customGauges: { headerLabel: "Monitoring", showLabel: false, devices: [ { idx: "209", deviceHeader: "Toaster", lowerText: "Voltage", gaugeAppendText: "volts", gaugeMaxValue: 255, gaugeWidth: 150, lineWidth: 12, markerWidth: 12, markerColor: "#70db70" }, { idx: "208", deviceHeader: "Toaster", gaugeAppendText: "Amps", lowerText: "Current", gaugeAppendText: "volts", gaugeMaxValue: 16, gaugeWidth: 150, lineWidth: 12, markerWidth: 12, markerColor: "#70db70" }, { idx: "232", deviceHeader: "Brightness", lowerText: "Manual Override", gaugeAppendText: "%", gaugeMaxValue: 100, gaugeWidth: 150, lineWidth: 12, markerWidth: 12, markerColor: "#707070", }, ], }, rooms: [ { idx: "17", name: "Status" }, // can only show switch status,, breaks if temp. in room? //{ idx: "14", name: "Testing" }, ], }, },– Peter
-
Hi Peter,
Great it is working out for you! In the config there is a question that the lower part breaks when it encounters a temperature. Is that right? It should be able to show temperatures as well.
-
Hi
rooms: [ { idx: "17", name: "Status" }, // can only show switch status,, breaks if temp. in room? //{ idx: "14", name: "Testing" }, ],I have a “room” plan set in Domoticz that contains various virtual devices, if i add a temperature device to it, the list of devices shown in MM stops at that device.
With “mote” (temp & humidity) sensor in the room
With no mote in the room.
Please note: I have used custom css to shrink the members of the room to a more compact left justified list, rather than spread across the whole width of the screen.
regards Peter
-
I can have a look at the temp/hum issue. I have several of these sensors myself and they do work in this layout. I would need the JSON-output of the specified device to figure out the problem.
-
I tried, but am unable to reproduce your problem. If you would like me to have a look, please post the JSON result for the device “mote”.
-
Hi
Sorry for the delayed response.
It appears that the issue occurs when there is no temperature or humidity data in the json output.
the sensor had no data while i was initially testing. After collecting some data it works as expected.
sample json data:pi@MM-lite:~$ curl "http://10.60.2.252:8080/json.htm?type=devices&rid=196" { "ActTime" : 1623221642, "AstrTwilightEnd" : "18:46", "AstrTwilightStart" : "05:45", "CivTwilightEnd" : "17:46", "CivTwilightStart" : "06:45", "DayLength" : "10:07", "NautTwilightEnd" : "18:16", "NautTwilightStart" : "06:15", "ServerTime" : "2021-06-09 14:54:02", "SunAtSouth" : "12:16", "Sunrise" : "07:12", "Sunset" : "17:19", "app_version" : "2020.2 (build 12917)", "result" : [ { "AddjMulti" : 1.0, "AddjMulti2" : 1.0, "AddjValue" : 0.0, "AddjValue2" : 0.0, "BatteryLevel" : 255, "CustomImage" : 0, "Data" : "0, 27.0", "Description" : "temperature and humidity in my office. polled from mqtt", "Favorite" : 0, "HardwareDisabled" : false, "HardwareID" : 3, "HardwareName" : "virtual hardware", "HardwareType" : "Dummy (Does nothing, use for virtual switches only)", "HardwareTypeVal" : 15, "ID" : "14114", "LastUpdate" : "2021-01-04 17:58:14", "Name" : "mote", "Notifications" : "false", "PlanID" : "0", "PlanIDs" : [ 0 ], "Protected" : false, "ShowNotifications" : true, "SignalLevel" : "-", "SubType" : "THGN122/123/132, THGR122/228/238/268", "Timers" : "false", "Type" : "Temp + Humidity", "TypeImg" : "temperature", "Unit" : 1, "Used" : 1, "XOffset" : "0", "YOffset" : "0", "idx" : "196" } ], "status" : "OK", "title" : "Devices" }With Temperature and humidity
pi@MM-lite:~$ curl "http://10.60.2.252:8080/json.htm?type=devices&rid=196" { "ActTime" : 1623222662, "AstrTwilightEnd" : "18:46", "AstrTwilightStart" : "05:45", "CivTwilightEnd" : "17:46", "CivTwilightStart" : "06:45", "DayLength" : "10:07", "NautTwilightEnd" : "18:16", "NautTwilightStart" : "06:15", "ServerTime" : "2021-06-09 15:11:02", "SunAtSouth" : "12:16", "Sunrise" : "07:12", "Sunset" : "17:19", "app_version" : "2020.2 (build 12917)", "result" : [ { "AddjMulti" : 1.0, "AddjMulti2" : 1.0, "AddjValue" : 0.0, "AddjValue2" : 0.0, "BatteryLevel" : 14, "CustomImage" : 0, "Data" : "32.2 C, 34 %", "Description" : "temperature and humidity in my office. polled from mqtt", "DewPoint" : "14.35", "Favorite" : 0, "HardwareDisabled" : false, "HardwareID" : 3, "HardwareName" : "virtual hardware", "HardwareType" : "Dummy (Does nothing, use for virtual switches only)", "HardwareTypeVal" : 15, "HaveTimeout" : false, "Humidity" : 34, "HumidityStatus" : "Comfortable", "ID" : "14114", "LastUpdate" : "2021-06-09 15:10:35", "Name" : "mote", "Notifications" : "false", "PlanID" : "0", "PlanIDs" : [ 0 ], "Protected" : false, "ShowNotifications" : true, "SignalLevel" : "-", "SubType" : "THGN122/123/132, THGR122/228/238/268", "Temp" : 32.19, "Timers" : "false", "Type" : "Temp + Humidity", "TypeImg" : "temperature", "Unit" : 1, "Used" : 1, "XOffset" : "0", "YOffset" : "0", "idx" : "196", "trend" : 1 } ], "status" : "OK", "title" : "Devices" }mote sensor appears now, above the snake enclosure light.
thanks again for your attention
-
Hi tanks for great module. I have a small problem with the counter today from the power consumption. this doesn’t show me the amount of use of the day. Gas and water working fine. see screenshot. Do you have a solution, or where I have to search? !!
-
This post is deleted! -
Alle data is retrieved from the JSON response. Could you post it for the electricity counter?
-
Hi everyone, please help with setting up customs.css
Can anyone advise me how to change the font and icon size only for the first three rooms? (Red marked)
I would also need to delete the dividing lines marked in green.
I will be very grateful for more detailed advice.
customs.css
.domoCellState { text-align: right; vertical-align: center; padding-left: 10px; font-size: 300%; /* velikost čísla teploměru */ color: #FFFFFF; line-height: 100%; } .domoIconDiv { padding-right: 5px; font-size: 200%; /* velikost ikony teploměru */ vertical-align: center; } .domoCell { text-align: left; vertical-align: center; font-size: 200%; /* velikost pisma popisku teplomeru - vedle ikony teploměru */ line-height: 100%; } .domoRoomCell { vertical-align: center; padding-right: 20px; font-size: 0%; /* velikost pisma nadpisu room */ }Config.js
the room numbers for which I would like to change the font size are idx 1, 8, 9{ module: "MMM-Domoticz-ext", position: "bottom_bar", config: { apiBase: "192.168.2.80", apiPort: "8081", updateInterval: 15, displayType: "room", alwaysShowDashboard: false, alwaysShowActions: false, showButtons: false, horizontal: true, columnCount: 3, dashboardColumnCount: 12, maxTitleLength: 18, rooms: [ { idx: "1" }, { idx: "9" }, { idx: "8" }, { idx: "11" }, { idx: "12" }, { idx: "13" }, ], } },Another question is whether it is possible to replace the character C with ° (character Celsius)
-
I don’t think it is possible to just change the font for the first lines. All are in the same class.
-
How to remove the lines (marked in green) I have already come.
using this codehr.domoDivider { display: none; }If it is not possible to change the font size of only the first three sensors, it is possible to run 2 instances of the module in config.js, but I do not know how to distinguish these instances in customs.css
-
I think this is also not possible, but I’m not an css expert. Maybe others have soms ideas.
You could create your own module based on the code and modify that css.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login