Read the statement by Michael Teeuw here.
[ORDER CLOSED] Two way mirror order in Germany
-
@yawns @Advokaten
Thank you guys ! :) -
My mirrors finally arrived last night. Looking really good!
Well, at least it looked good. One is already broken. Last night when the art-forwarder arrived (it was 9 o’clock at night) everything seemed fine. Even when I took-off the bubble-wrap after the driver left everything looked fine. I just peeled of the foil a bit on one corner to get a first impression of the “mirror effect”. A bit too transparent was my first impression. OK, it was not really blackened on the display side yet. But anyway it is not installed yet as well.
This morning I tried to remove the protection foil a bit further and noticed a tiny chip on the edge where the mirror coating came off. The glass chip was sticking to the foil. So I thought maybe glueing the chip back on with super glue would do the trick because the edges will be covered anyway on the final install. After doing so I noticed that there was a crack (“first crack”) just a couple of mm’s into the glass a tad further down the edge. When I lifted the mirror to hold it against the light to see the crack’s extent the mirror broke in half. The breaking edge was even more further down the edge. So there must have been a second crack which caused the breaking.I cannot prove that it actually was a transport damage, but most likely it was. Too bad that I signed the delivery papers “OK” and did not notice the cracks BEFORE I started glueing the chip back on. I guess this will leave me with nothing but a broken mirror as it will be hard to get reliable proof for the freight insurance to call in :-(
The second mirror ist perfectly fine though.
-
@tomster I’m sad to hear that one of your mirrors is broken :( How big is the one that broke and the one that didn’t?
-
The broken one was 740 x 540 mm’s. The other is 1000 x 800 mm’s.
-
@tomster
First of all many thanks for the positive recession to the mirror and the delivery itself.It makes me sad to hear that your mirror has unfortunately broken :( Are you really sure that nothing happened in the night? (Children, woman / girlfriend, pets …)? What exactly do you mean with chip? In my opinion, it looks like a thumb print. Perhaps the mirror was only applied and worn on one side of the edge, and therefore the break has arisen (I refer to the lever law). Can you really rule out that it did not happen to yourself when you put the mirror from A to B at home? When I packed the mirrors all, I looked at each and could not see any damage. So it must have happened later. I’m really sorry :( :(
-
Thx for your reply Chriz,
of course I cannot outrule anything. I took the mirrors from the driver and brought them directly to my living-room. To my dearest knowledge no-one else but me has touched the mirror since. That is why I came to the assumption it might have been transport damage.
The glass chip (~7mm in diameter) looks like a “Abplatzung” as if the mirror was put to the floor on the edge-side and some sort of tiny pebble was sitting there. I do have no real explanation for the cracks though. -
Hey there !
I thought I should pose some pictures of my mirror. At first: Thanx to You @Goldjunge_Chriz for all Your effort. It was kind of challenging my human faith, too. Had the same crazy thoughts as @yawns had. As specially as the recipient of the mirror (and the guy who paid ;-) had no idea, that this was actually his present. (so not much financial risk,. put a friendship…so it had to end well!) So, thx god, nothing was cracked - I feel really sorry for You, @tomster !!Short review:
As in the last picture, the mirror seems darker, compared to the wall,. the red shiny is the light installation and confuses a little bit.
Comparing the first image (monitor settings eco2 of 4(no eco), brightness 45%) to the other one, You see the mirror is indeed dropping light emission significantly. In a sunny condition, You have to really concentrate to read the text. (light is coming from the ceiling and the window a meter next to the mirror’s wall. None the less, it is more important in the evening and the morning hours.To those who might ask. Yes, the monitor is smaller than the mirror, that is not that bad, so don’t have so much heating problem. I was been able to put a pass-par-tout around with a tiny whole for the NOIR-Cam which switches the monitor on and off.
I want to put out, that it wasn’t that easy to fix the mirror on the frame, and I am not that sure, if my way was the best. How did You guys fix the mirror on your wodden frame??
Thanx again Chriz for all Your effort !! I really appreciate that !!
-
If insurance won’t cover the damages - I’d like to propose a funding for @tomster as one of his mirrors broke, if there is any interest in this community for such a thing? If everyone chips in, it won’t be that much each.
-
Thanks for your review and the great pictures :) Did I understand correctly that you are altogether very satisfied? As already described above, there is no mirror that works perfectly in hundreds of different light conditions. This one makes it however already quite properly and is a good mixture. If on a television for example the sunshine falls directly on it you can see nothing more ;) You can see, nothing is absolutely Perfect.
@Advokaten
Great Idea. I am in ;)@all
New additional insights about the mirror glass we could make from the first order:
- The mirror glass works easily with cameras and motion detection systems behind it
- the mirror glass can easily be glued for the frame-free use.
-
@Goldjunge_Chriz so a PIR sensor, for example, can see through it? That’s awesome!
-
@Advokaten I guess he means motion detection with a camera
-
@Goldjunge_Chriz said in [ORDER CLOSED] Two way mirror order in Germany:
New additional insights about the mirror glass we could make from the first order:
- The mirror glass works easily with cameras and motion detection systems behind it
- the mirror glass can easily be glued for the frame-free use.
Can you provide more details (what type of camera, how did you attach it to the mirror. …) and maybe even a picture of the setup?. Thanks.
-
-
The most important Question: will there be a second chance to place an order? this time i will organize a personal transport from Germany to Vienna :)
-
@cpramhofer said in [ORDER CLOSED] Two way mirror order in Germany:
The most important Question: will there be a second chance to place an order? this time i will organize a personal transport from Germany to Vienna :)
Please have a look at this thread:
https://forum.magicmirror.builders/topic/2016/two-way-mirror-order-in-germany-accumulation-for-2nd-round/The transport of big mirrors to austria is now also possible ;)
-
Today Finale My mirror arrived. All Fine. Trank you Chris for your exzellent work.👍🏽
-
@Goldjunge_Chriz Yes I am very satisfied !
@Hawking I used a official Raspberry NoIR Camera attached via the wired-band to the cis-port of a Raspberry 3. The attachments to the mirror is kind of special, cause it is depending of ones setting.
As You can see in the pictures I used the cut-off of the pass-par-tout as a first framework, pooled two screws in it, unfortunately one was shorter than the other one, that is, in the other picture, You realized the camera is odd, but that doesn’t matter as I didn’t want to take photos rather then detect motion. The image by raspistill is very unsharp, but that isn’t important either. It does what it does, detecting motion.
As the pass-par-tout is kind of foam I could screw-in the screw directly. In total the framework fits neatly between monitor and mirror-frame.Hopefully that helps build Your mirror.
-
Hey folks, could You please post some photos, how You fixed the mirrorglas to Your framework!? Thank You !
-
Here is my Cam picture behind the mirror from @Goldjunge_Chriz.
RaspiCam with old mirror glass
RaspiCam with new mirror glass
my Mirror
-
@Advokaten
Thank you very much for the kind offer. But having had a good sleep or two over the issue I managed to find peace with myself again ;-) All in all it’s just a broken mirror…
I did order a second mirror along with the first and decided to simply change my plans for its use. I went to my local glass shop and asked them to cut it in half. That way I will end up with 2 mirrors. Ok, they are different in size now, but hey? I will end up with 2 mirrors still :)Again, I really do appreciate your offer as it proves a hell of a lot in regards of community spirit. Especially since it is not the fault of any of you. I do hope though that you do not bother that I have to turn down your offer. Everything is fine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login